• International Journal of Control, Automation, and Systems
• /
• 제5권3호
• /
• pp.269-282
• /
• 2007

This paper presents a robust control method via the intelligent adaptive backstepping design technique for stable walking of nine-link biped robots with unknown model uncertainties and external disturbances. In our control structure, the self recurrent wavelet neural network(SRWNN) which has the information storage ability is used to observe the uncertainties of the biped robots. The adaptation laws for all weights of the SRWNN are induced from the Lyapunov stability theorem, which are used for on-line controlling biped robots. Also, we prove that all signals in the closed-loop adaptive system are uniformly ultimately bounded. Through computer simulations of a nine-link biped robot with model uncertainties and external disturbances, we illustrate the effectiveness of the proposed control system.

• Journal of Power Electronics
• /
• 제7권2호
• /
• pp.174-180
• /
• 2007

In this paper, a simple control method for two-stage utility grid-connected photovoltaic power conditioning systems (PCS) is proposed. This approach enables maximum power point (MPP) tracking control with post-stage inverter current information instead of calculating solar array power, which significantly simplifies the controller and the sensor. Furthermore, there is no feedback loop in the pre-stage converter to control the solar array voltage or current because the MPP tracker drives the converter switch duty cycle. This simple PCS control strategy can reduce the cost and size, and can be utilized with a low cost digital processor. For verification of the proposed control strategy, a 2.5kW two-stage photovoltaic grid-connected PCS hardware which consists of a boost converter cascaded with a single-phase inverter was built and tested.

• 대한교통학회지
• /
• 제15권4호
• /
• pp.53-71
• /
• 1997

본 논문에서는 간선도로에서 단일검지기를 이용한 구간통행속도 추정방법론을 제안하고 평가하였다. 제안된 모형은 VPLUSKO방법, 퍼지제어방법, 신경망이론방법의 세 가지이다. 을지로에서 실측한 실측자료를 통하여 개별 모형의 성능을 평가하고, 타구간에 적용가능성을 평가하는 이식성평가를 실시하였다. VPLUSKO방법은 사용방법이 단순한 장점은 있으나, 타 방법에 비하여 성능이 열등하다. 정밀성은 떨어지지만 단순성에 비하여 어느 정도의 예측력은 있어, 개략적인 혼잡도 판정의 용도로는 사용될 수 있다고 판단된다. 퍼지제어방법은 특정검지기에서 추정능력은 신경망방법에 비하여 다소 저조하지만 적절한 수준의 추정력을 보인다. 특히, 이식성 측면에서는 타 방법보다 우수성이 입증되었다. 퍼지방법은 교통변수와 통행속도 간의 비 선형관계를 모형화할 수 있는 장점이 있다. 신경망방법은 학습대상이 되는 검지기에 대해서는 추정능력이 우수하나 이식성 측면에서는 문제점이 노출되었다. 결론적으로 본 논문에서는 평균통행속도 추정에는 대상 방법 중에서 추정의 정밀성이나 이식성을 고려해볼 때 퍼지제어방법을 최선의 방법으로 추천한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.285-287
• /
• 1995

In the case of driving the SLIM(Single-sided Linear Induction Motor) as the VVVF inverter, the performance of SLIM, which is a thrust, normal force and so on, varies according to a slip frequency as a function of the external load. It is impossible that the open-loop control method control the speed of a SLIM accurately. So that, this paper is proposed the speed control method of a SLIM for a automatic conveyor system with the slip frequency vector control method. To analyze the dynamic characteristics of a SLIM, the state equation is derived from the equivalent circuit of the SLIM, ignored the end effect. The slip frequency and the normal force of SLIM are constantly controlled at the steady state. The simulated results is compared with the experimental values.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권3호
• /
• pp.264-271
• /
• 2014

Virtual synchronous generator (VSG) in single-phase to interface distributed renewable energy resources is investigated in this paper. Mathematical models and numerical analysis are utilized to illustrate the features of the VSG. Enhanced control strategy is presented to ensure the performance of the VSG. Besides, a second order generalized integer (SOGI) is employed to calculate the instantaneous output power of the VSG in virtual ${\alpha}{\beta}$ frame. By the means of a phase-locked loop based scheme, the VSG can seamlessly transform between islanded and grid-tied modes, which can meet the requirements of micro-grid. At last, the validation and the proposed approach are verified by the simulated results using PSCAD/EMTDC.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권11호
• /
• pp.514-519
• /
• 2001

This Paper presents an application of a on-line self-organizing fuzzy logic controller to a boiler system of fossil-power plant. A boiler-turbine system is described as a MIMO nonlinear system in this paper. Then, three single loop fuzzy logic controllers are designed independently. The control rules and the membership functions of proposed fuzzy logic control system are generated automatically without using plant model. The simulation shows successful results for wide range operation of boiler system of fossil-power plant.

• 한국정밀공학회지
• /
• 제28권8호
• /
• pp.936-941
• /
• 2011

This paper deals with the issue of motion control of a single rod cylinder-load system using simple adaptive control (SAC) method. Prior to controller design, the experiment of open-loop response has been performed. Based on it, design parameters of transfer function are obtained and used for controller design. The effect of parallel feedforward compensator has been investigated by computer simulation, suppressing the oscillatory motion. Through experiments it is conformed that the SAC method gives good tracking performance compared to the PD control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.25-25
• /
• 2000

This paper presents a design method of sliding mode control (SMC) for single input linear systems with mismatched uncertainties. We define a virtual state based on the controllable canonical form of the nominal system. And we define a sliding surface for the augmented system with a virtual state. This sliding surface makes it possible to use SMC technique with various types of controllers. In this paper, we construct a controller that combines SMC with robust controller. We design a robust controller for the system with only mismatched uncertainties using a form of linear matrix inequality (LMI). We make a virtual state from this robust control input and the states of the nominal system. And we design a sliding mode controller that stabilizes the overall closed-loop system.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2003년도 추계학술발표논문집
• /
• pp.291-305
• /
• 2003

In this work we developed the closed-loop model of a paper machine during grade change with the intention to provide a reliable dynamic model to be used in the model-based grade change control scheme. During the grade change, chemical and physical characteristics of paper process change with time. It is very difficult to represent these characteristics on-line by using physical process models. In this work, the wet circulation part and the drying section were considered as a single process and closed-loop identification technique was used to develop the grade change model. Comparison of the results of numerical simulations with plant operation data demonstrates the effectiveness of the model identified.

• 경영과학
• /
• 제11권3호
• /
• pp.103-128
• /
• 1994

Due to the trend of evolution toward a broadband communication network with fiber-optics, the design and operation of fiber-optic network have been received a great deal of research attention recently. Furthermore, even a single fiber link failure in the network may result in severe service loss. Thus, the network survivability becomes an importantissue in planning and designing the network. This survey is on modelling of various fiber-optic subscriber loop network(FSLN) design problems, which are essential ones for providing broadband communication services and B-ISDN services. Models are classified and investigated as either conventional decomposition-iteration approach or integrated design method. To build survivable networks, SHR models are also suggested by ring control schemes. The result of this study will be effectively applied to build a design model for FSLN in the practical applications.