• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.385-392
• /
• 2001

There have been many investigations and researches on PLC type of optical amplifiers because they are convenient for mass production and also can integrate multi-functional devices into a single chip. In this research. the fabrication of optical waveguide made of Si/$Sio_2$ by FHD(Flame Hydrolysis Deposition) for passive integrated optical devices and $1.5\mu\textrm{m}$ optical amplifier by Solution Doping method, which is one of the method doping $Er^{3+}$ into the thin film, are mainly discussed.

• Korean Journal of Food Science and Technology
• /
• v.33 no.5
• /
• pp.603-610
• /
• 2001

The quality characteristics of soy yogurt prepared with different proteolytic enzymes and starter culture were evaluated. In order to facilitate the growth of lactic acid bacteria and subsequent production of lactic acid, soy protein isolate(SPI) was hydrolyzed using three kinds of proteases; one extracted from Aspergillus oryzae, bromelain and ${\alpha}-chymotrypsin$. The cultural systems employed thereafter for lactic fermentations were: 1) Bifidobacterium bifidum, 2) B. bifidum and Lactobacillus acidophilus, 3) B. bifidum and Lactobacillus bulgaricus. In soy yogurt, pH was more decreased by mixed culture method than single culture method with the accumulation of lactic acid. Viable cells of lactic acid bacteria in soy yogurts were measured $10^8$ CFU/g by the single culture method while $10^9$ CFU/g by the mixed culture method except ${\alpha}-chymotrypsin$ treatment. The amount of free amino acids in soy yogurts were substaintially increased by enzyme treatment. Viscosity was decreased by enzyme treatment, resulting in higher viscosity by ${\alpha}-chymotrypsin$ treatment. Water holding capacity was found to be higher in the single culture method in case of enzyme treatment. Among the various volatile flavor components isolated and identified after enzyme hydrolysis, acetaldehyde, ethanol, diacetyl, butyl alcohol contents tended to increase by lactic fermentation.

• Journal of the Korean Ceramic Society
• /
• v.31 no.8
• /
• pp.893-901
• /
• 1994

In this study, AlN powder of fine particle size and of high purity was synthesized by the carbothermal reduction-nitridation of monodisperse, spherical Al(OH)3 which had been prepared by sol-gel method using Al(O-sec-C4H9)3 as the starting material. Depending on the mixing order and kinds of reducing agents, the optimum condition for the preparation of AlN was determined as follows. AlN single-phase was produced by the carbothermal reduction-nitridation of (1) Benzene-washed Al(OH)3 and the reducing agent, carbon, which was mixed in a ball mill: for 5 hours at 140$0^{\circ}C$ under NH3 atmosphere; (2) The mixture prepared by hydrolysis of alkoxide solution into which carbon had been dispersed beforehand: for 5 hours at 135$0^{\circ}C$ ; (3) Al(OH)3 Poly(furfuryl alcohol) composite powder: for 2.5 hours at 135$0^{\circ}C$; (4) The mixture of Al(OH)3 and polyacrylonitrile: for 5 hours at 140$0^{\circ}C$. Addition of CaF2 increased the nitridation rate when carbon or polyacrylonitrile was used as the reducing agent; but it had no effect on the nitridation rate when furfuryl alcohol was used as the reducing agent.

• Journal of the Korean Ceramic Society
• /
• v.31 no.7
• /
• pp.804-812
• /
• 1994

Stable PZT coating sol was prepared using chelating agent, ethylacetoacetate(EAcAc) by sol-gel processing under ambient atmosphere. Through FT-IR spectrum analysis on solution of each reaction step, formation of metal complex was confirmed and prepared PZT sol was stable over several months. Through TG-DTA, XRD, FT-IR spetrum analysis of PZT gel powder, it was understood that the addition of EAcAc could reduce the transition temperature to ferroelectric phase, due to the increased homogeneity by matching the hydrolysis and condensation rates by chelation. Single perovskite phase was obtained by the heat-treatment at 54$0^{\circ}C$ for 30 min. The film was coated on ITO-coated glass substrate by dip coating method. After heat-treatment, PZT thin film had thickness in the range of 20~130 nm. The maximum dielectric constant of its thin film at room temperature and 1 kHz was 128.

• Archives of Pharmacal Research
• /
• v.27 no.6
• /
• pp.619-623
• /
• 2004

Tissue factor (TF, tissue thromboplastin) is a membrane bound glycoprotein, which acceler-ates the blood clotting, activating both the intrinsic and the extrinsic pathways to serve as a cofactor for activated factor VII (Vila). The TF-factor Vila complex (TF/VIIa) proteolytically activates factors IX and X, which leads to the generation of thrombin and fibrin clots. In order to isolate TF inhibitors, by means of a bioassay-directed chromatographic separation technique, from the leaves of Eriobotrya japonica Lindley (Rosaceae), a known sesquiterpene glycoside (2) and ferulic acid (3) were isolated as inhibitors that were evaluated using a single-clotting assay method for determining TF activity. Another sesquiterpene glycoside (1) was also isolated but was inactive in the assay system. Compound 3 was yielded by alkaline hydrolysis of compound 2. The structures of compounds 1, 2, and 3 were identified by means of spectral analysis as $3-O-{\alph}-L-rhamnopyranosyl-(1{\rightarrow}4)-a-L-rhamnopyranosyl-(1{\rightarrow}2)-[{\alph}-L-rhamnopyrano-syl-(1{\rightarrow}6)]-{\beta}-D-glucopyranosyl nerolidol$ (1), $3-O-{\alph}-L-rhamnopyranosyl-(1{\rightarrow}4)-{\alph}-L-rhamnopyr-anosyl-(1{\rightarrow}2)-[{\alph}-L-(4-trans-feruloyl)-rhamnopyranosyl-(1{\rightarrow}6)]-{\beta}-D-glucopyranosyl$ nerolidol (2) and ferulic acid (3), respectively. Compounds 2 and 3 inhibited 50% of the TF activity at con-centrations of 2 and $369{\;}\mu\textrm{m}/TF$ units, respectively.

• Korean Journal of Veterinary Service
• /
• v.34 no.3
• /
• pp.201-208
• /
• 2011

Streptococcus equi subsp. zooepidemicus (S. zooepidemicus) is a pathogen of a variety of infections in horse. We studied biochemical and molecular characteristics of S. zooepidemicus isolated from the genital tract of Thoroughbred mares in Korea. Seventy-nine isolates were identified as S. zooepidemicus by biochemical and PCR method from 374 horses. The biochemical characteristics of S. zooepidemicus isolates were positive reaction of lactose and sorbitol. However, S. zooepidemicus isoltes were negative reaction of inulin, mannitol, raffinose, trehalose, aesculin hydrolysis, growth in 6.5% NaCl and variable reaction of maltose. Epidemiological investigations of S. zooepidemicus isolates were performed by fragment analysis of SzP (S. zooepidemicus protective protein) gene, CNE (collagen binding protein) gene and ISR (16s rRNA intergenic spacer region) gene using ABI Prism $3,130{\times}1$ Genetic Analyzer System. All isolates were shown single amplification size of 906 bp in CNE gene, but SzP and ISR gene were shown variable patterns of fragment size. The characteristics of S. zooepidemicus investigated in this study will be very useful for the prevention of infection and the studies of epidemiologic characteristics of S. zooepidemicus, causing the severe economic losses due to reproductive failures.

• YAKHAK HOEJI
• /
• v.44 no.4
• /
• pp.293-299
• /
• 2000

Biodegradable microspheres made from poly-lactide-co-glycolide polymers have been considered as a new delivery system for single-dose vaccine. Purified tetanus toxoid (TT) was encapsulated in poly-lactide(PLA) and poly-lactide-co-glycolide (PLGA) microparticles using a solvent evaporation method in a multiple emulsion system (water-in oil-in water). The morphology of 77-loaded microparticles was spherical and the suface of them was smooth. The particle size was in a range of 2-10. Protein loading efficiency was 68-97.8%. PLGA (85:15) microparticle showed the highest efficiency. Protein release pattern was influenced by polymer molecular weight and composition. The release rate of PLA(Mw 100,000) microsphere was higher than any other microspheres. In consequence of the hydrolysis of PLGA(50:50) microspheres, environmental pH decreased from 7.4 to 5.0. The PLA, PLGA (75:25) and PLGA (85:15) microshperes showed no significant pH change. The antigenicity or n in microshperes was assayed by indirect sandwich ELISA using equine polyclonal tetanus antitoxin for capture antibody and human polyclonal tetanus antitoxin for primary antibody. The antigenicity of TT in PLA (Mw 100,000), PLGA(50:50, Mw 100,000) and PLGA (75:25, Mw 73,300) after 30 days incubation showed 54, 40.9 and 76.7%, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.11
• /
• pp.1559-1565
• /
• 2014

Cellulase and xylanase are main hydrolysis enzymes for the degradation of cellulosic and hemicellulosic biomass, respectively. In this study, our aim was to develop and test the efficacy of a rapid, high-throughput method to screen hydrolytic-enzyme-producing microbes. To accomplish this, we modified the 3,5-dinitrosalicylic acid (DNS) method for microwell plate-based screening. Targeted microbial samples were initially cultured on agar plates with both cellulose and xylan as substrates. Then, isolated colonies were subcultured in broth media containing yeast extract and either cellulose or xylan. The supernatants of the culture broth were tested with our modified DNS screening method in a 96-microwell plate, with a $200{\mu}l$ total reaction volume. In addition, the stability and reliability of glucose and xylose standards, which were used to determine the enzymatic activity, were studied at $100^{\circ}C$ for different time intervals in a dry oven. It was concluded that the minimum incubation time required for stable color development of the standard solution is 20 min. With this technique, we successfully screened 21 and 31 cellulase- and xylanase-producing strains, respectively, in a single experimental trial. Among the identified strains, 19 showed both cellulose and xylan hydrolyzing activities. These microbes can be applied to bioethanol production from cellulosic and hemicellulosic biomass.

• Journal of the Korean Ceramic Society
• /
• v.25 no.3
• /
• pp.217-224
• /
• 1988

Pore structures of Alkoxide-derived aluminas are investigated by BET Nitrogen Sorption method. Aluminas are derived from hydrolysis of aluminum isopropoxide at 3$^{\circ}$and 8$0^{\circ}C$ with stoichiometric quantities of water in use. The resulting hydrolysates are then subjected to thermal treatment for a fixed period of time from 200$^{\circ}$to 50$0^{\circ}C$ in gradual fashions. The hydrolysates obtained at 3$^{\circ}C$ increase their pore volumes with increasing heat treatment, exhibiting their pore-size distributio as twinpeaked. In contrast, the reverse is true to the hydrolysates obtained at 8$0^{\circ}C$, showing their pore size distribution as single-peaked. This suggests that the pore shapes of the former shall be slit-shaped, whilst whose as the latter shall be of a ink-bottle shape. All the evidence indicates that the hydrolytic temperatures play an important role not only in determining the pore shapes of the alumina samples, but in controlling the liberation of structural water in the alumina layers. It is also, surmized that the subsequent heat treatment may at best affect the mode of pore size distribution for the resulting alumina product(s).

• Korean Journal of Materials Research
• /
• v.23 no.10
• /
• pp.543-549
• /
• 2013

The purpose of this paper was to investigate the effect of a high-energy milling (HEM) process on the particle morphology and the correlation between a thermal treatment and tetragonal/monoclinic nanostructured zirconia powders obtained by a precipitation process. To eliminate chloride residue ions from hydrous zirconia, a modified washing method was used. It was found that the used washing method was effective in removing the chloride from the precipitated gel. In order to investigate the effect of a pre-milling process on the particle morphology of the precipitate, dried $Zr(OH)_4$ was milled using a HEM machine with distilled water. The particle size of the $Zr(OH)_4$ powder exposed to HEM reduced to 100~150 nm, whereas that of fresh $Zr(OH)_4$ powder without a pre-milling process had a large and irregular size of 100 nm~1.5 ${\mu}m$. Additionally, modified heat treatment process was proposed to achieve nano-sized zirconia having a pure monoclinic phase. It was evident that two-step calcining process was effective in perfectly eliminating the tetragonal phase, having a small average particle of ~100 nm with good uniformity compared to the sample calcined by a single-step process, showing a large average particle size of ~300 nm with an irregular particle shape and a broad particle size distribution. The modified method is considered to be a promising process for nano-sized zirconia having a fully monoclinic phase.