• Korean journal of applied entomology
• /
• v.47 no.4
• /
• pp.309-313
• /
• 2008

In a cultivated field of Salicornia europae in the Jeonam Province, Korea, Scrobipalpa salinella (Lepidoptera, Gelechiidae) which feeds and leads to a serious damage was found. The discovery of this species is to reconfirm its distribution in Korea because the first report by Park and Ponomarenko (2006) was based on a single female and it was collected in a montane area far from seaside where its host plants, halophytes, are planted. For identification, photos of imago and genitalia are given, and the damage by larvae on Salicornia europae are noted.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.210.2-210.2
• /
• 2016

An inductively coupled plasma source was prepared for the deposition of a-C:H thin film. Properties of the inductively coupled plasma source are investigated by fluid simulation including Navier-Stokes equations and home-made tuned single Langmuir probe. Signal attenuation ratios of the Langmuir probe harmonic frequency were 13.56Mhz and 27.12Mhz. Dependencies of plasma parameters on process parameters were accord with simulation results. Ar/CH4 plasma simulation results shown that hydrocarbon radical densities have their lowest value at the vicinity of gas feeding line due to high flow velocity. For input power density of 0.07W/cm3, CH radical density qualitatively follows electron density distribution. On the other hand, central region of the chamber become deficient in CH3 radical due to high dissociation rate accompanied with high electron density. The result suggest that optimization of discharge power is important for controlling deposition film quality in high density plasma sources.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.45-52
• /
• 2017

This paper deals with the operation strategy of reactive power in a multi-infeed HVDC (MIHVDC) system, in which several converters are connected to the same or nearby separate AC buses. The potential problems concerning a MIHVDC system when feeding a weak AC network are as follows: the need for coordination of the recovery control, the possibility of voltage instability or low quality of the area connected to the MIHVDC system, and the risk of mutual commutation failures. These problems in MIHVDC systems are similar to those in single-infeed HVDC (SIHVDC) systems, but the differences with the phenomenon of the SIHVDC system are the interactions between converters. The main reason for the potential problems of HVDC systems (MIHVDC or SIHVDC) is voltage variation; therefore, to mitigate the voltage variations, the performances of the HVDC system should be enhanced. Consequently, to mitigate the potential problems of MIHVDC systems, several solutions are suggested in this study, including installing STATCOM and installing a line arrester on the tower. The study results will be applied to a multi-infeed HVDC system in Korea.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.2
• /
• pp.215-225
• /
• 2011

In this paper, a buck DC-DC bridge converter is used as a power factor correction (PFC) converter for feeding a voltage source inverter (VSI) based permanent magnet brushless DC motor (PMBLDCM) drive. The front end of the PFC converter is a diode bridge rectifier (DBR) fed from single phase AC mains. The PMBLDCM is used to drive the compressor of an air conditioner through a three-phase voltage source inverter (VSI) fed from a variable voltage DC link. The speed of the air conditioner is controlled to conserve energy using a new concept of voltage control at a DC link proportional to the desired speed of the PMBLDC motor. Therefore, VSI operates only as an electronic commutator of the PMBLDCM. The current of the PMBLDCM is controlled by setting the reference voltage at the DC link as a ramp. The proposed PMBLDCM drive with voltage control-based PFC converter was designed and modeled. The performance is simulated in Matlab-Simulink environment for an air conditioner compressor load driven through a 3.75 kW, 1500 rpm PMBLDC motor. To validate the effectiveness of the proposed speed control scheme, the evaluation results demonstrate improved efficiency of the complete drive with the PFC feature in a wide range of speed and input AC voltage.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.14 no.1
• /
• pp.45-50
• /
• 2007

Ethanol extract of 20 botanicals in 3 concentrations i.e., 2.5%, 5% and 10% were evaluated for their efficacy to improve reproductive performance of mulberry silkworm (Bombyx mod L.) through feeding botanical enriched mulberry leaves during $2^{nd}$ day of $4^{th}$ age as well as $1^{st}$ and $3^{rd}$ day of $5^{th}$ age larvae. The preliminary screening was done by ranking the botanicals based on influence in most important reproductive contributing parameters such as single cocoon weight, effective rate of rearing, pupation rate, fecundity and recovery of eggs/kg cocoon. Five botanicals viz., Asparagus recemosus, Achyranthes aspera, Tribulus terrestris, Withania somnifera, Parthenium histerophorus ranked first were further evaluated at 8% 5% and 3% concentrations to confirm their effectiveness and standardize effective concentration. Among the rearing parameters, mature larval weight, shell ratio and number of cocoons/kg were not significantly influenced by the treatments. However, reproductive parameters such as effective rate of rearing (wt), pupation rate (%), fecundity (No.) and egg recovery (g)/kg cocoon were significantly (P<0.05) influenced by the botanicals. Higher fecundity and egg recovery were obtained on treatment with Withania somnifera irrespective of concentrations. However at 5% concentration, pupation rate, fecundity as well as egg recovery were found significantly higher than that of other concentrations, confirming its effectiveness for improving reproductive efficiency.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1600-1605
• /
• 2007

This study was undertaken to investigate the effects of oxidative stress on growth performance, nutrient digestibilities and activities of antioxidant enzymes of weanling pigs. In the experiment, 24 male $Landrance{\times}Yorkshire $weanling pigs were allotted to three groups of 8 animals each. Pigs were fed individually. According to a single factorial arrangement, pigs received diets with 5% of either fresh (group 1 and group 3) or oxidized fish oil (peroxide value was 786.50 meq $O_2/kg$ before inclusion in the diet, group 2). At the beginning of the experiment, pigs in group 3 received an intraperitoneal injection of diquat at 12 mg/kg of body weight. The trial lasted for 26 d. A metabolism test was carried out during the last 4 days of the second week. The results showed that feeding diets containing oxidized fish oil or injection with diquat depressed the growth performance and nutrient digestibilities of weanling pigs, decreased activities of antioxidant enzymes and increased concentration of malondialdehyde in plasma and liver. Intraperitoneal injection of diquat would induce more serious oxidative stress than oral intake of oxidized fish oil in the diet. In conclusion, administration of oxidized fish oil or diquat could induce oxidative stress in weanling pigs, and oxidative stress could depress growth performance and impact anti-oxidative ability of young pigs.

• Fisheries and Aquatic Sciences
• /
• v.19 no.4
• /
• pp.20.1-20.12
• /
• 2016

The osteological development in Sebastes koreanus is described and illustrated on the basis of 32 larvae [6.11-11.10 mm body length (BL)] and a single juvenile (18.60 mm BL) collected from the Yellow Sea. The first-ossified skeletal elements, which are related to feeding, swimming, and respiration, appear in larvae of 6.27 mm BL; these include the jaw bones, palatine, opercular, hyoid arch, and pectoral girdle. All skeletal elements are fully ossified in the juvenile observed in the study. Ossification of the neurocranium started in the frontal, pterotic, and parietal regions at 6.27 mm BL, and then in the parasphenoid and basioccipital regions at 8.17 mm BL. The vertebrae had started to ossify at ~7.17 mm BL, and their ossification was nearly complete at 11.10 mm BL. In the juvenile, although ossification of the pectoral girdle was fully complete, the fusion of the scapula and uppermost radial had not yet occurred. Thus, the scapula and uppermost radial fuse during or after the juvenile stage. The five hypurals in the caudal skeleton were also fused to form three hypural elements. The osteological results are discussed from a functional viewpoint and in terms of the comparative osteological development in related species.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.2C no.5
• /
• pp.246-252
• /
• 2002

Two-dimensional steady state simulations of planar type radio frequency inductively coupled plasma (RFICP) have been performed. The characteristics of RFICP were investigated in terms of power transfer efficiency, equivalent circuit analysis, spatial distribution of plasma density and electron temperature. Plasma density and electron temperature were determined from the equations of ambipolar diffusion and energy conservation. Joule heating, ionization, excitation and elastic collision loss were included as the source terms of the electron energy equation. The electromagnetic field was calculated from the vector potential formulation of ampere's law. The peak electron temperature decreases from about 4eV to 2eV as pressure increases from 5 mTorr to 100 mTorr. The peak density increases with increasing pressure. Electron temperatures at the center of the chamber are almost independent of input power and electron densities linearly increase with power level. The results agree well with theoretical analysis and experimental results. A single turn, edge feeding antenna configuration shows better density uniformity than a four-turn antenna system at relatively low pressure conditions. The thickness of the dielectric window should be minimized to reduce power loss. The equivalent resistance of the system increases with both power and pressure, which reflects the improvement of power transfer efficiency.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.7
• /
• pp.675-682
• /
• 2009

Instead of direct driving like BLDC, the induction principle is adopted as a driving one for planar stage. The stage composed of four linear induction motors put in square type is activated by two-axial forces; low-frequency attractive force and thrust force of the linear induction motors. Here, the modified vector control whose new inputs are q-axis current and dc current biased to three phase current instead of d-axis current or flux current is applied extensively to overall motion of the stage. For the developed system, the precision step test and the constant velocity test are tried to guarantee its feasibility for TFT-LCD pattern inspection. However, to exclude a discontinuity due to phase shift and minimize a force ripple synchronized with the command frequency, the initial system is revised to the antagonistic structure over the full degree of freedom. Concretely describing, the porous air bearings guide an air-gapping of the stage up and down and a pair of liner induction motors instead of single motor are activated in the opposite direction each other. The performances of the above systems are compared from trapezoid tracking test and sinusoidal test.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.193-196
• /
• 2006

In this paper, two $4{\times}4$ rectangular patch array antennas operated at 20 GHz are implemented for the satellite communication. Two $2{\times}2$ sub-arrays are designed and used for the design of $4{\times}4$ patch array. The sixteen patch antennas and microstrip feeding line are printed on the single-layered substrate. The spacing between the array elements is chosen to be $0.736{\lambda}$. The HPBW(Half Power Beam Width) of the $4{\times}4$ microstrip patch array is 17.01 degrees in the E-plane and 17.71 degrees in the H-plane with a gain of 11.6dB in the experimental results. The HPBW of the recessed $4{\times}4$ microstrip patch array is 18.66 degrees in E-plane and 17.12 degrees in the H-plane with a gain of 12.55dB in the experimental results.