• Therapeutic Science for Rehabilitation
• /
• v.7 no.1
• /
• pp.63-77
• /
• 2018

Objective : The purpose of this study was to investigate the effects of task-oriented training with functional electrical stimulation on hand function in incomplete cervical cord injury. Method : The subjects of the study were 3 adults diagnosed as incomplete cervical cord injury. The design of this study was ABA single-subject research design to compare dominant hand function of before and after intervention and detect individual effects. The experiment consisted of 30sessions, in which baseline process A1 and A2 were implemented 5 sessions each for 10sessions. Intervention B was implemented 20 sessions. The dependent variable was converted to the change of hand function every session, and Canadian Occupational Performance Measure (COPM), Jebsen-Taylor Hand Function Test(JTHFT), Wolf Motor Function Test(WMFT) were selected for outcome measurements. Result analysis was suggested through visual analysis using a graph and comparison of pre, post and follow-up intervention measurements. Results : As a result, the quality and quantity of dominant hand function increased during intervention B compared to the baseline A1 for all subjects. Baseline A2 was also maintained without training. Additionally, JTHFT, WMFT and COPM scores demonstrated improvement and maintain. The follow up JTHFT and WMFT showed increased required time on all subjects and decrease or maintain task performance and satisfaction in COPM. Conclusion : The task-oriented training with function electrical stimulation in this study has been positive effects on hand function and task performance and satisfaction.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.61-66
• /
• 2006

The combined ADEPT(Anaerobic Digestion Elutriated Phased Treatment)-SHARON(Single reactor system for High Ammonium Removal Over nitrite)-ANAMMOX(Anaerobic ammonium oxidation) processes were operated for resources recovery and nitrogen removal from slurry-type piggery waste. The ADEPT process operated at an acidogenic loading rates of 3.95 gSCOD/L-day, the SCOD elutriation rate and acid production rate were 5.3 gSCOD/L-day and 3.3 gVFAs(as COD)/L-day, respectively. VS reduction and SCOD reduction by the hydrolysis were 13% and 0.19 $gSCOD_{prod.}/gVS_{feeding}$, respcetively. Also, the acid production rate was 0.80 $gVFAs/gSCOD_{prod}$. In methanogenic reactor, the gas production rate and methane content were 2.8 L/day($0.3m^3CH_4/kgCOD_{removal}@STP$) and 77%, respectively. With these operating condition, the removals of nitrogen and phosphorus were 94.1% as $NH_4-N$(86.5% as TKN) and 87.3% as T-P respectively.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.681-686
• /
• 2011

SPLITT Fractionation (SF) provides separation of sample into two subpopulations. Separation into more than two subpopulations requires repeated SF operations. In this study, two Gravitation SF (GSF) channels were connected in a series (Tandem GSF) to obtain a separation into three subpopulations and to improve the fractionation efficiency (FE) of the fraction-b in the full-feed depletion (FFD) mode. In a single channel FFD-GSF operation, the fraction-a contained mostly the beads smaller than the cutoff diameter ($d_c$), while the fraction-b contained beads smaller than $d_c$ as well as those larger than dc, as expected. The measured FE's of the fraction-b are much lower than those of the fraction-a in all cases. The FE's of the fraction-a are higher than 84% with the average of about 91%, while those of the fraction-b are lower than 60% with the average of about 43%. No particular trends were found between FE and $d_c$, indicating the performance of FFD-GSF does not change with $d_c$ in the range where tested. Also no clear trends were observed between the FE and the sample-feeding flow rate, indicating higher sample-feeding rate can be used to increase the sample throughput without losing resolution. When two GSF channels were connected so that the flow stream emerging from the outlet-b of the channel-1 is fed directly into the channel-2, all three FE's measured for the fraction-1a were high with the average value of 99%, indicating it contains almost purely the beads smaller than $d_c$. The FE's measured for the fraction-2a are still good with the average value of 92%. The FE's measured for the fraction-2b are 64% in average, which is about 20% improvement from those obtained in a single channel FFD-GSF at the same conditions.

• Journal of fish pathology
• /
• v.28 no.1
• /
• pp.27-35
• /
• 2015

VHSV is a major viral agent that affects freshwater and marine fish, causing serious economic losses in aquaculture in the world. Due to their filter-feeding activity, bivalve mollusks may act as viral transmitters after accumulation of the fish viruses released into seawater from infected fish. Amplification by RT-PCR was carried out to investigate the presence of VHSV in pacific oysters (Crassotrea gigas) and blue mussels (Mytilus edulis), inhabiting regions around aquatic farms in Korea. Primers designed from conserved regions of VHSVs allowed us to detect four different types of VHSV in a single PCR. Twenty two of the eighty four samples showed positive results of VHSV in a 2-step RT-PCR. Using six positive samples from three different regions in Korea, we cloned and sequenced the glycoprotein (G) gene (467-bp long) of VHSVs. Genetic analysis of the VHSVs detected in shellfish in various geographical areas of Korea showed highly restricted results to VHSV type Iva. This was in agreement with the reports showing only a single genotype of VHSV (Iva genotype) in outbreaks in cultured or wild fish in Korea. Consequently, we investigated VHSVs carried by bivalve mollusks inhabiting the vicinity of aquatic farms, and revealed correlationship between the type of viral accumulated in shellfish by filter-feeding, and those detected in disease outbreaks in fish.

• Korean Journal of Food Science and Technology
• /
• v.4 no.4
• /
• pp.252-258
• /
• 1972

Methods of separating yeast cells from oil-water-cell emulsion and subsequent purification of the recovered yeast have been studied. In addition, the results of preliminary feeding experiments in which a yeast grown on gas oil was incorporated into chick rations are reported. According to the present study, it appears that the recovery of the yeasts would be easier at pH 9, since the emulsion is relatively more unstable. A class of surface active agent at a concentration of 0.3% was found to facilitate the separation of the yeast from the emulsion. The use of electrolytes such as NaCl and KCl were found to be most effective in breaking the emulsion. Solvent treatment using iso-propyl alcohol and its azeotropic mixture with hexane at $58^{\circ}C$ are particularly suitable for purification of the yeast. In the feeding experiment it was found that 5 percent of the fishmeal in the control ration could be replaced by the yeast with no adverse effect on performance. However, when 8 percent of the fish meal in the control ration was replaced by the yeast, some effect on live-weight gain of the chicks was observed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.158-165
• /
• 2007

In this paper, the circularly polarized $4{\times}4$ array antenna is proposed for the X-band. A single antenna consists of square patch and unequal cross-aperture coupled feeding. The RHCP(Right Handed Circularly Polarization) is generated by unequal cross-aperture coupled feeding. By reducing space among elements of way antenna from 0.8 ${\lambda}_0$ to 0.45 ${\lambda}_0$, the mounting area of array antenna is miniaturized. The $2{\times}2$ array antenna is designed using sequential rotation feeding network. The good level of gain, axial ratio, and impedance bandwidth are achieved. The $4{\times}4$ array antenna is extended by ${\lambda}/4$ transformer and T-junction power divider. The simulated maximum radiation gain is 15.09 dBi at 10 GHz. The simulated 3 dB Axial Ratio bandwidth is from 9.05 to 10.4 GHz(13.5%). Also the measured impedance bandwidth($VSWR{\leq}2$) of manufactured $4{\times}4$ array antenna is from 8.45 to 11.84 GHz(33.9%). The measured maximum radiation gain is 11.10 dBi at 10 GHz. The measured 3 dB Axial Ratio bandwidth is from 9.42 to 10.47 GHz(10.5%).

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.25-32
• /
• 2021

In this paper, the Magneto-Electric(ME) dipole array antenna with dual-polarization in the X-Band is proposed and it is implemented and measured. The proposed array antenna is composed of 32 single ME dipole antenna and a Teflon PCB. 1 × 1 ME dipole antenna is implemented dual-polarization by radiating vertical polarization and horizontal polarization from two pairs of radiators. 2-port feeding structures are realized by lamination process using LTCC. And, each port independently feeds the radiator through a Γ-shaped feeding strip with isolation between ports. The Teflon PCB used in the antenna array has a 4-layer structure, and 2-port is fed through the top and bottom layers. The λ_g/4 transformer is applied to the transmission line of the Teflon PCB for impedance matching of the arrayed antenna and the Teflon PCB, and the optimal parameters are obtained through simulation. The measured maximum antenna gains of port 1 was 18.2 dBi, Cross-pol was 1.0 dBi. And the measured maximum antenna gains of port 1 was 18.1 dBi, Cross-pol was 3.2 dBi.

• Korean Journal of Poultry Science
• /
• v.29 no.3
• /
• pp.195-204
• /
• 2002

Two experiments were conducted to study the effects of nutrient level and feeding method of split diets for a.m. and p.m. on laying hen performance, feed cost and eggshell quality. In experiment 1, 384 ISA Brown layers of 30∼38wk of age were assigned to four treatments which comprise of three replicates each containing 32 birds. The control(C) was fed a conventional single diet throughout the day and split diet groups(T1, T2 and T3) were offered high energy/protein-low Ca diets, and low energy/protein-high Ca diets in a.m.(04:00∼15:00) and p.m.(15:00∼21:00), respectively. In the split diet groups, daily ME and CP consumption, and feed cost were significantly reduced(P<0.05) compared to the C, while the hen-day egg production, average egg weight and daily feed intake were not different among treatments. Due to the reduced daily ME and CP intakes and feed cost, the conversions of feed, ME, CP and feed cost required per day and per kg egg mass were also significantly improved(P<0.05) in the split diet groups. Eggshell qualities (egg specific gravity, egg breaking strength and eggshell thickness) were improved(P<0.05) by split diet feeding. As the Ca level of the p.m. diet increased. In Experiment 2, 384 ISA Brown layers of 50∼58 wk of age were used in three treatments and each treatment was represented by four replicates each containing 32 birds. The control(C) was fed a conventional single diet throughout the day and split diet group(T1) was offered high energy/protein-low Ca diets, and low energy/protein-high Ca diets in a.m.(04:00∼l5:00) and p.m.(15:00∼21:00), respectively. T2 group was fed the diet mixed (50:50) with the a.m. diets in mash and p.m. diet in pellet used T1 group. In T1 and T2 groups, daily feed intake and average egg weight were significantly reduced(P<0.05) compared to the C, while the hen-day egg production was not influenced by the feeding system. Daily ME and CP consumption, and feed cost were reduced(p.0.05), and the conversions of ME, CP and feed cost required per egg were also significantly improved(P<0.05) in T1 and T2, while the conversions of feed, ME, CP and feed cost required per kg egg mass were not different to the C. Eggshell qualities of T1 and T2 were improved(P<0.05) compared to the others. It was concluded the feed and nutrients consumption, feed cost per day or per kg egg mass could be reduced by introducing split diets for a.m. and p.m. and the feeding method of mixed diet of split diets were also convenient and effective for sparing feed cost and improvement of eggshell quality.

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.549-556
• /
• 2005

Effects of the dimensionless variables on the heat transport phenomena in the extrusion process of a single screw extruder have been studied numerically. Based on the understanding of the solids conveying related to the geometrical structure and characteristics of the screw, the heat balance equation for the solids conveying zone was established and normalized. The finite volume method and power-law scheme were applied to derive a discretized equation and the equation was solved using the alternating direction iterative method with relaxation. Effects of the dimensionless parameters, Biot and Peclet numbers, that define the heat transfer characteristics of the solids conveying zone have been investigated with respect to the temperature of the feeding zone and the length of the solids conveying zone. As the Biot number is increased, the heat loss by cooling dominates to decrease the temperature of the barrel but it has little effects on the temperature of the solids bed and the length of the solids conveying zone. On the other hand, if the Peclet number is increased, the convection term dominates to decrease the temperature of the solids bed and it results in an increase in the length of the solids conveying zone.

• Food Science of Animal Resources
• /
• v.31 no.4
• /
• pp.537-542
• /
• 2011

Biological or physiological genes that regulate metabolism and energy partitioning have the potential to influence economically important traits such as carcass and meat quality traits in beef cattle. The neuropeptide Y (NPY) functions as a central appetite stimulator and plays a major role in feed intake and energy-balance control. Therefore, the NPY gene is an excellent biological and physiological candidate gene for body weight, feeding, fatness or growth related traits in beef cattle. The objective of this study was to identify single nucleotide polymorphisms (SNPs) in the NPY gene and to evaluate the association of NPY SNP markers with carcass and meat quality traits in Korean cattle. The genomic region (711 bp) including intron 2 of NPY gene was amplified and sequenced, and five SNPs, g.4389 Del(C), g.4371Del(C), g.4271T>C, g.1899A>G and g.1517A>C, were identified. The PCR-RFLP method was then developed to genotype the individuals examined. The g.4271T>C SNP was significantly associated with M. Longissimus dori area (LDA) value (p<0.027). Animals with the TT ($78.144{\pm}0.950\;cm^2$) genotype had higher LDA than those with the CC ($72.266{\pm}2.039\;cm^2$), and animals with TC genotype showed intermediate value. This SNP genotype also showed a highly significant additive genetic effect for the LDA (p<0.01). No significant associations, however, was detected between any of the SNP genotype and other carcass traits measured in this study. In conclusion, SNP genotype of the NPY gene may be used as DNA markers to select animals that have a higher meat yield.