• Journal of Ginseng Research
• /
• v.45 no.1
• /
• pp.163-175
• /
• 2021

Background: Ginsenosides, which have strong biological activities, can be divided into polar or less-polar ginsenosides. Methods: This study evaluated the phytochemical diversity of the saponins in Panax ginseng (PG) root, American ginseng (AG) root, and Panax notoginseng (NG) root; the stem-leaves from Panax ginseng (SPG) root, American ginseng (SAG) root, and Panax notoginseng (SNG) root as well as the saponins obtained following heating and acidification [transformed Panax ginseng (TPG), transformed American ginseng (TAG), transformed Panax notoginseng (TNG), transformed stem-leaves from Panax ginseng (TSPG), transformed stem-leaves from American ginseng (TSAG), and transformed stem-leaves from Panax notoginseng (TSNG)]. The diversity was determined through the simultaneous quantification of the 16 major ginsenosides. Results: The content of ginsenosides in NG was found to be higher than those in AG and PG, and the content in SPG was greater than those in SNG and SAG. After transformation, the contents of polar ginsenosides in the raw saponins decreased, and contents of less-polar compounds increased. TNG had the highest levels of ginsenosides, which is consistent with the transformation of ginseng root. The contents of saponins in the stem-leaves were higher than those in the roots. The transformation rate of SNG was higher than those of the other samples, and the loss ratios of total ginsenosides from NG (6%) and SNG (4%) were the lowest among the tested materials. In addition to the conversion temperature, time, and pH, the crude protein content also affects the conversion to rare saponins. The proteins in Panax notoginseng allowed the highest conversion rate. Conclusion: Thus, the industrial preparation of less-polar ginsenosides from SNG is more efficient and cheaper.

• Analytical Science and Technology
• /
• v.35 no.2
• /
• pp.69-81
• /
• 2022

The method of measuring and classifying the energy category of neutrons directly using raw data acquired through a CZT detector is not satisfactory, in terms of accuracy and efficiency, because of its poor energy resolution and low measurement efficiency. Moreover, this method of measuring and analyzing the characteristics of low-energy or low-activity gamma-ray sources might be not accurate and efficient in the case of neutrons because of various factors, such as the noise of the CZT detector itself and the influence of environmental radiation. We have therefore developed an efficient method of analyzing radiation characteristics using a neutron and gamma-ray analysis algorithm for the rapid and clear identification of the type, energy, and radioactivity of gamma-ray sources as well as the detection and classification of the energy category (fast or thermal neutrons) of neutron sources, employing raw data acquired through a CZT detector. The neutron analysis algorithm is based on the fact that in the energy-spectrum channel of 558.6 keV emitted in the nuclear reaction ¹¹³Cd + ¹n → ¹¹⁴Cd + in the CZT detector, there is a notable difference in detection information between a CZT detector without a PE modulator and a CZT detector with a PE modulator, but there is no significant difference between the two detectors in other energy-spectrum channels. In addition, the gamma-ray analysis algorithm uses the difference in the detection information of the CZT detector between the unique characteristic energy-spectrum channel of a gamma-ray source and other channels. This efficient method of analyzing radiation characteristics is expected to be useful for the rapid radiation detection and accurate information collection on radiation sources, which are required to minimize radiation damage and manage accidents in national disaster situations, such as large-scale radioactivity leak accidents at nuclear power plants or nuclear material handling facilities.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2756-2766
• /
• 2024

Small rod-controlled pressurized water reactors (PWR) are the ideal energy source for vessel propulsion, benefiting from their high reactivity control efficiency. Since the control rods (CRs) increase the complexity of reactivity control, this paper seeks to study the performance of CRs in small rod-controlled PWRs to extend the lifetime and reduce power offset due to CRs. This study investigates CR grouping, move-in/out strategies, and axially non-uniform design effects on core neutron physics metrics. These metrics include axial offset (AO), core lifetime (CL), fuel utilization (FU), and radial power peaking factor (R-PPF). To simulate the movement of the CRs, a "Critical-CR-burnup" function was developed in OpenMC. In CR designs, the CRs are grouped into three banks to study the simultaneous and prioritized move-in/out strategies. The results show CL extension from 590 effective full power days (EFPDs) to 638-698 EFPDs. A lower-worth prioritized strategy minimizes AO and the extremum values decrease from -0.69 and + 0.81 to -0.28 and + 0.51. Although an axially non-uniform CR design can improve AO at the beginning of cycle (BOC), considering the overall CR worth change is crucial, as a significant decrease can adversely impact axial power distribution during the middle of cycle (MOC).

• Journal of Radiation Industry
• /
• v.18 no.3
• /
• pp.155-166
• /
• 2024

In this study, a liquid scintillation spectrometer was developed for online continuous monitoring of tritium nuclides in water. The device consists of two photoelectron multiplier tubes (PMT), a simultaneous counting circuit, and a signal processing unit including a multi-channel analyzer (MCA). As a method to verify the performance of the equipment developed in this study, samples were prepared using a standard source, and the spectrum of tritium was measured to evaluate the detector characteristics such as efficiency, background (BKG), and minimum detectable activity (MDA). To evaluate the effect of pretreatment on tritium radioactivity measurement results, the MDA of water (seawater and groundwater) samples before and after pretreatment was calculated and compared. The results of the evaluation confirmed the satisfaction of the reference values of the Nuclear Safety Commission's "Discharge Control Standard in Drainage Water" and the World Health Organization's (WHO) "Tritium Radioactivity Concentration for Drinking Water Standards". The liquid scintillation spectrometer developed in this study, with or without pretreatment, confirmed detection performance equivalent to 1/100th of the discharge control standard for drainage water (40,000 Bq L^-1) and the WHO's drinking water standard for tritium radioactivity (10,000 Bq L^-1).

• Journal of radiological science and technology
• /
• v.30 no.2
• /
• pp.153-159
• /
• 2007

Digital medical image commenced with an introduction of PACS has become more popular today in the radiation diagnosis and radiation treatment and made great progress, in particular, for medical testing field, whereas it has made slow progress for radiation treatment field. In order to accommodate the current trend of digital from analog, a spherical mechanical check device(SMCD) that is the form of spherical differing from the existing form of flat or cube has been designed and tested its practicability to replace the part in mechanical check with digital image from QA operation. If the distance maintains constance between source(target) and image detector with constant distance to the center of spherical mechanical check device(SMCD), the size will be shown as a constant image at all times regardless of its direction exposed. For the test, two accurate hemispheres are made and put together which results in a sphere of the equilateral circle. It enables a variety of implementation of the existing mechanical check using digital image as follows: congruity level of radiation field and light field, size accuracy of radiation field and collimation field, gantry rotation isocenter check, collimation rotation isocenter check, room laser accuracy check, collimation rotation angle check, couch rotation angle check, and more. In addition, it has proved its practicability in checking isocenter congruity level as real time at the time of simultaneous rotation between gantry and couch that is applied to the non-coplanar field, which had been hard to apply as a device formed of existing flat or cube.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.185-193
• /
• 2016

Purpose of this study is to classify damaged lands according to the cause of the damage and their influences based on characteristic of the damaged lands in DeMilitarized Zone(DMZ) area, and utilize this study as a fundamental study for establishment of ecosystem restoration system. Literature review and field survey have been conducted to review the damage status of DMZ area. For field survey, first year and second year have been conducted, in which type of the damage has been reviewed in this study. In the result, types of damage have been classified into 6 categories: 'alteration of initial landform', 'loss of surface layer', 'land pollution', 'alteration of soil chemical property', 'decline of vegetation', and 'invasion of foreign species'. Restoration for each damage type is as following. First, for alteration of initial landform, the land is restored to the original landform prior to the damage and connection to surrounding ecosystem is considered. Second, for loss of surface layer, lost surface layer is restored or further loss is prevented with stabilization. Third, for land pollution, source of the pollution is eradicated or self-circulation with purification of polluted land is encouraged. Fourth, for alteration of soil chemical property, soil is restored of its original property with eradication of the pollution source and improvement of soil. Fifth, for decline of vegetation, current vegetation and anticipated alteration in future are considered and number of wild species is to be increased based on structure and characteristic of nearby vegetation. Sixth, for invasion of foreign species, prevention of dominance by risky species and facilitation ecological stability with ecological management are to be considered. Influence according to the cause of damage has occurred in secondary(indirect) influence or simultaneous occurrence of several damage types. Considering all these aspects, when type of the damage is complex, restoration process for each of former mentioned 6 damage types with solitary influence should be considered in unison.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.68-77
• /
• 2008

We have developed an inversion algorithm for loop-loop electromagnetic (EM) data, based on the localised non-linear or extended Born approximation to the solution of the 2.5D integral equation describing an EM scattering problem. Source and receiver configuration may be horizontal co-planar (HCP) or vertical co-planar (VCP). Both multi-frequency and multi-separation data can be incorporated. Our inversion code runs on a PC platform without heavy computational load. For the sake of stable and high-resolution performance of the inversion, we implemented an algorithm determining an optimum spatially varying Lagrangian multiplier as a function of sensitivity distribution, through parameter resolution matrix and Backus-Gilbert spread function analysis. Considering that the different source-receiver orientation characteristics cause inconsistent sensitivities to the resistivity structure in simultaneous inversion of HCP and VCP data, which affects the stability and resolution of the inversion result, we adapted a weighting scheme based on the variances of misfits between the measured and calculated datasets. The accuracy of the modelling code that we have developed has been proven over the frequency, conductivity, and geometric ranges typically used in a loop-loop EM system through comparison with 2.5D finite-element modelling results. We first applied the inversion to synthetic data, from a model with resistive as well as conductive inhomogeneities embedded in a homogeneous half-space, to validate its performance. Applying the inversion to field data and comparing the result with that of dc resistivity data, we conclude that the newly developed algorithm provides a reasonable image of the subsurface.

• Journal of Plant Biotechnology
• /
• v.34 no.2
• /
• pp.111-118
• /
• 2007

Global warming crisis due primarily to continued green house gas emission requires impending change to renewable alternative energy than continuously depending on exhausting fossil fuels. Bioenergy including biodiesel and bioethanol are considered good alternatives because of their renewable and sustainable nature. Bioethanol is currently being produced by using sucrose from sugar beet, grain starches or lignocellulosic biomass as sources of ethanol fermentation. However, grain production requires significant amount of fossil fuel inputs during agricultural practices, which means less competitive in reducing the level of green house gas emission. By contrast, cellulosic bioethanol can use naturally-growing, not-for-food biomass as a source of ethanol fermentation. In this respect, cellulosic ethanol than grain starch ethanol is considered a more appropriate as a alternative renewable energy. However, commercialization of cellulosic ethanol depends heavily on technology development. Processes such as securing enough biomass optimized for economic processing, pretreatment technology for better access of polymer-hydrolyzing enzymes, saccharification of recalcitrant lignocellulosic materials, and simultaneous fermentation of different sugars including 6-carbon glucose as well as 5-carbon xylose or arabinose waits for greater improvement in technologies. Although it seems to be a long way to go until commercialization, it should broadly benefit farmers with novel source of income, environment with greener and reduced level of global warming, and national economy with increased energy security. Mission-oriented strategies for cellulosic ethanol development participated by government funding agency and different disciplines of sciences and technologies should certainly open up a new era of renewable energy.

• Korean Journal of Clinical Laboratory Science
• /
• v.52 no.3
• /
• pp.237-244
• /
• 2020

Currently, sexually transmitted diseases (STD) are referred to as "sexually transmitted infections" (STIs) in the sense of including asymptomatic infections. STIs have a range of interrelationships. This study used the STI defined by the Minister of Health and Welfare of the Republic of Korea, and targeted syphilis, gonorrhea, chlamydia infection, chancroid, genital herpes simplex, condyloma, human papillomavirus, and non-gonococcal urethritis. The factors were characterized by identifying multiple and simultaneous STIs. This study used the data from the laboratory information system of a consigned inspection institution located in Seoul from 2014 to 2019. In this study, multiple STIs were identified as overlapping STIs of a double infectious source (10 types) and multiple STIs of a third infectious source (6 types). Among the 16 types of multiple STIs, U. urealyticum (9 types), HSV-2 (8 types), C. trachomatis (7 types), HPV 6, 11 (7 types), N. gonorrhoeae (6 types), and T. pallidum (1 type) were included. Therefore, additional research on interrelationship studies, such as STIs, which has the highest proportion of multiple STIs, will be necessary.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.6
• /
• pp.93-100
• /
• 2014

The objective of this study is to propose the measurement system implementation method for the evaluation and measurement of the indoor-impulsive over 170 dB noise source. For the purpose of measuring impulse noise, design and implementation constructed followed subsystems of the testing center, microphone, ear simulator, head and torso simulator and so on. Measurement systems for the accuracy and reliability of impulse noise are implemented when measuring 3 ways of measurements method by the simultaneous measurement system design. For the accuracy and reliability of three mutually indoor-impulse noise measurements were compared, three kinds of measuring methods in accordance with the peak sound pressure level and octave band. Comparing the results of data, the indoor-impulse noise by analyzing a frequency characteristic was validated in difference for the statistical significance. Result are determined by the influence of the reflected wave. Therefore, the flexible size of the interior test site while interior impulse noise measurement system was constructed. Throughout this system can be affected by parameters that are the impulse noise source and the corresponding frequency-characteristic analysis to determine the spectrum of the reflected wave. And, in the near future, indoor impulse noise measurement systems for acquisition and analysis are utilized in useful data.