• 대한기계학회논문집B
• /
• 제28권6호
• /
• pp.659-664
• /
• 2004

It is important to measure precisely the size and velocity of micro-bubbles used in various field. The synchrotron X-ray micro-imaging technique was employed to measure the size and velocity of micro-bubbles moving in an opaque tube simultaneously. Phase contrast images were obtained at interfaces of micro-bubbles between water and air due to their different refractive indices. The X-ray micro-imaging technique was found to measure an optical fiber with an accuracy of 0.2%. Micro-bubbles of 20∼60$\mu\textrm{m}$ diameter moving upward in an opaque tube (${\Phi}$＝2.7mm) were tested to measure bubble size and up-rising velocity. For DI water, the measured velocity of micro-bubbles is nearly proportional to the square of bubble size, agreed well with the theoretical result. In addition, the synchrotron X-ray micro-imaging technique can measure accurately the size and velocity of several overlapped micro-bubbles.

• 동력기계공학회지
• /
• 제9권2호
• /
• pp.33-39
• /
• 2005

Experiments are performed to study the mixed convection flow and heat transfer in an inclined parallel plates with the upper part cooled and the lower part heated uniformly. The Reynolds number ranges from $4.0{\times}10^{-3}\;to\;6.2{\times}10^{-2}$, the angle of inclination, ${\theta}$, from 0 to 45 degree from the horizontal line, and Pr of the high viscosity fluid is 909. In this paper, the PIV(Particle image velocimetry) with TLC(Thermo-sensitive liquid crystal) tracers is used for visualizing and analysis. This method allows simultaneous measurement of velocity and temperature field at a given instant of time. Quantitative data of the temperature and velocity are obtained by applying the color-image processing to a visualized image, and neural network is applied to the color-to-temperature calibration. This paper describes the methods, and presents the quantitative visualization of mixed convection. From this study, it is found that the flow pattern can be classified into three patterns which are affected by Reynolds number and the angle of inclination.

• 설비공학논문집
• /
• 제18권9호
• /
• pp.698-706
• /
• 2006

Experiment and numerical calculation have been peformed to investigate mixed convection heat transfer between inclined parallel plates. Particle image velocimetry (PIV) with thermo-sensitive liquid crystal (TLC) tracers is used for visualizing and analysis. This method allows simultaneous measurement of velocity and temperature fields at a given instant of time. Quantitative data of the temperature and velocity are obtained by applying the color-image processing to a visualized image, and neural network is applied to the color-to-temperature calibration. The governing equations are discretized using the finite volume method. The results are presented for the Reynolds number ranges from 0.004 to 0.062, the angle of inclination, ${\Theta}$, from 0 to 45 degree and Prandtl number of the high viscosity fluid is 909. The results show velocity, temperature and mean Nusselt numbers distributions. It is found that the periodic flow of mixed convection between inclined parallel plates is shown at $0^{\circ}{\leq}{\Theta}<30^{\circ}$, Re<0.062, and the flow pattern can be classified into three patterns which depend on Reynolds number and the angle of inclination. The minimum Nusselt numbers occur at Re=0.05 regardless of the angle of inclination.

• 천문학회보
• /
• 제38권2호
• /
• pp.32-32
• /
• 2013

The Korean VLBI Network (KVN) as a world-first multi-frequency VLBI system is operated at four bands of 22, 43, 86, and 129 GHz simultaneously. The performances of both single dish and VLBI network were already confirmed through single dish researches and VLBI evaluation test observations. The VLBI common use of the KVN at 22/43 GHz bands has been started from this autumn. The combined network of KVN and Japanese VERA (KaVA) will start the common use from the first half of next year. Here we present several observational results in the fields of star forming regions, late-type stars, and active galactic nuclei using the KVN and KaVA. The fringes of 44 GHz $CH_3OH$ (Class I) masers were detected from 26 sources for the first time using the KVN and imaging observations are under performing. Simultaneous observations of SiO and $H_2O$ masers toward about 1000 evolved stars showed the different maser properties between SiO and $H_2O$ masers according to the evolutionary stages of AGB and post-AGB stars. The catalog of correlated flux densities were established from a 43 GHz (Q-band) survey of 637 extragalactic sources. At 22 GHz (K-band), flux density measurement and fringe survey for new sources were performed toward a large number of sources. In addition, the large program of KVN and/or KaVA under planning is introduced.

• 한국전자통신학회논문지
• /
• 제13권3호
• /
• pp.617-622
• /
• 2018

시설원예 하우스 내부의 공기 밀폐나 유동상태에 직접적인 영향을 주는 송풍기, 측창 개폐기의 동시제어는 $CO_2$ 농도 관리에 필수적이다. 현재 농업인구 감소에 따른 개인당 경작면적 증가로 자동화 시스템과 통합제어의 요구가 꾸준히 증가하고 있는 실정이다. 본 논문에서는 $CO_2$발생기의 연료 및 연소공기 혼합비(공연비), 내 외부 환경에 따른 $CO_2$ 공급량의 제어와 $CO_2$ 공급에 있어 중요한 변수인 측정 개폐기와 같은 기존 설치기기를 동시에 제어할 수 있는 통합 제어시스템을 제안한다.

• 전자공학회논문지SC
• /
• 제45권6호
• /
• pp.35-41
• /
• 2008

차량용 레이더 신호처리 기술에는 정확한 거리 및 속도 추출, 다중 타겟 검지, 멀티패스에 의한 클러터 제거, 다중 레이더 간섭 제거 등이 요구된다. 본 논문에서는 77GHz FMCW 레이더를 탑재한 다중 사용자들의 간섭을 제거하기위한 방법을 제안하였다. 이는 FMCW 레이더의 특성을 이용한 것으로, 레이더를 장착하는 각 차량들이 서로 다른 주파수 스윕(Sweep) 모양의 첩 열로 신호를 송신하는 방법이다. 제안된 방법은 비록 같은 주파수 대역을 사용하는 차량이 인접 지역에 여러 대 있어도 서로간의 간섭을 회피 할 수 있어, 지능형 자동차는 물론이고, 로봇, 무인 전투 차량, 무인 자동차 등 다양한 분야에 응용할 수 있을 것으로 본다.

• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.140-152
• /
• 1997

A simultaneous measurement of the wall skin friction and near-wall streamwise velocity fluctuations is performed using hot film and hot wire anemometers to investigate the relation between them. Near-wall turbulence statistics measured with a hot-wire probe are in good agreement with previous results. Turbulence properties of the wall skin friction fluctuations measured with a hot film also show fairly good agreements with those measured by others except that rms level is lower in the present study. Long-time averaged space- time correlations show that the wall skin friction is highly correlated with a turbulence structure which is tilted from the wall in the streamwise direction. Tilting angles are obtained from the phase shifts between the wall skin-friction and streamwise velocity fluctuations. The convection velocity of the near-wall streamwise velocity obtained from the space-time correlation is in good agreement with that from the direct numerical simulation database.

• 대한기계학회논문집B
• /
• 제32권7호
• /
• pp.529-535
• /
• 2008

The characteristics of combustion process in an internal combustion engine are affected by the mixing process between injected fuel and ambient gas. Therefore, it is necessary to understand the mixture formation process of diesel spray. In this study, the spray structure was visualized by the exciplex fluorescence method, which can provide the simultaneous 2-D images of vapor and liquid phase in inner spray. For accurate investigation, the liquid-phase images were recorded with a 35mm still camera and CCD camera. Consequentially, it could be confirmed that the high-concentration vapor phase is formed in the region of spray tip and the edge of the liquid phase where droplets exist in the evaporating diesel spray, and the formed vapor is spread by diffusion. Also, the distribution of vapor is determined by the motion of droplets that exist in the edge of the liquid phase and the spray-tip region.

• Nuclear Engineering and Technology
• /
• 제26권1호
• /
• pp.108-118
• /
• 1994

긴 수평관에서 공기와 물의 역성층류시 적용할 수 있는 단열계면 마찰계수에 대한 준 실험식을 개발하였다. 둥근관과 사각관으로 된 단열 역성층류 실험장치를 사용하여 물의 수위 및 공기의 속도를 변화시키면서 일련의 실험을 수행하였다. 수평으로 된 원형 및 사각형 실험관속으로 흐르는 유체의 주요 유동 변수들을 동시에 측정한 실험치들과 계면이 물결파에 의해 거칠어진다는 새로운 개념을 도입하여 성층류영역의 계면마찰 계수에 대한 준 실험식을 개발하였다. 이 해석에는 다른 연구자들의 병류실험치 15개를 포함하여 총 201개의 실험치들을 사용하였다. 이 실험치들과 여기서 제안한 준 실험식의 예측치와 비교하면 오차 범위는 $\pm$30% 정도이다.

• 대한두개안면성형외과학회지
• /
• 제11권1호
• /
• pp.45-48
• /
• 2010

Purpose: After surgical interventions of mandible fractures, facial asymmetry can be occurred, and it leads to serious problems for patients. This can be solved by mandible angle ostectomy. Methods: A 19-year-old male underwent percutaneous surgical intervention for left mandibular angle and right parasymphyseal fractures 3.5 years ago. The left angle was protruded compared to the other side. Using a percutaneous approach, $4.5{\times}1cm$ sized piece of mandible angle was sawed off. For the right angle, intraoral approach was performed for angle ostectomy, and the angle was sawed off by a size of $4{\times}1cm$, using a pattern based on the piece from the left side. Results: After surgery, no complications such as subcondylar fractures, refractures, insufficient corrections, secondary angle formations, hematomas, and transient nerve palsies were seen, and symmetric correction of mandible angles were done. Conclusion: In facial asymmetries due to mandibular fractures, mandible ostectomy could be a solution. Using the bone section from the contralateral side, measurement of the amount of bone sawed off was possible, and via percutaneous approach on the previously operated site with simultaneous scar revision, and intraoral approach for the contralateral side, cosmetically satisfactory result was obtained.