• 한국통신학회논문지
• /
• 제12권6호
• /
• pp.545-553
• /
• 1987

큐 길이를 제한하는 단일 서버 탄뎀 큐의 망에 대한 수식적인 근사 해법을 제시하였다. 유한 길이 큐를 갖는 큐잉망에서는 큐 길이의 제한 때문에 블록킹이 발생하며 이 블록킹은 각 큐 간에 상호 종속적으로 발생한다. 따라서 이러한 큐잉망을 해석하는 데는 어려움이 따른다. 본 논문에서는 이러한 블록킹이 발생하는 망을 해석하기 위해 종속하는 스테이션들의 블록킹을 고려하여 현 스테이션으로의 메시지 도착률을 증가시키므로 각각의 큐를 독립 M/M/1/K시스팀으로 해석하였다. 이 근사 해법을 이용하여 각 스테이션의 상태 확률, 평균 큐 길이, 대기 시간 등을 쉽게 구하였다. 제시한 근사 해법의 정당성을 입증하기 위해 이 근사 해법의 결과와 상태 천이 연립 방정식에 의해 구한 값을 비교하였으며 컴퓨터 시뮤레이션으로 검증하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권1호
• /
• pp.53-62
• /
• 2003

In this study, nonlinear aeroelastic characteristics of an supersonic missile wing with strong shock interferences are investigated. The missile wing model has a freeplay structural nonlinearity at its pitch axis. To practically consider the effects of freeplay structural nonlinearity, the fictitious mass method is applied to structural vibration analysis based on finite element method. Nonlinear aerodynamic flows with unsteady shock waves are also considered in supersonic flow regions. To solve the nonlinear aeroelastic governing equations including the freeplay effect, a modal-based coupled time-marching technique based on the fictitious mass method is used in the time-domain. Various aeroelastic computations have been performed for the nonlinear wing structure model. Linear and nonlinear aeroelastic analyses have been conducted and compared with each other in supersonic flow regions. Typical nonlinear limit cycle oscillations and phase plots are presented to show the complex vibration phenomena with simultaneous fluid-structure nonlinearities.

• 한국산업정보학회논문지
• /
• 제6권4호
• /
• pp.75-80
• /
• 2001

본 논문에서는 복잡한 하이퍼카오스 신호를 발생시키는 HVPM(Hyperchaotic Volume Preserving Maps) 모델을 이용한 카오스 동기화 알고리즘을 제안하고자 한다. 제안한 HVPM 모델은 3차원 이산시간(discrete-time) 연립 차분방정식으로 구성되어 있으며, 비선형 사상(maps)과 모듈러(modulus) 함수를 사용하여 랜덤한 카오스 어트랙터(attractor)를 발생시킨다. Pecora와 Caroll은 최근 카오스 시스템이 카오스 신호를 이용하여 동기화가 가능하다고 보고하였다. 따라서 본 논문에서는 하이퍼카오스 신호를 발생시키는 HVPM 모델간의 동기화를 위하여 결합동기(coupled synchronization) 알고리듬을 제안하였다. 모의실험에서 카오스 시스템과 하이퍼카오스 신호를 결합하여 카오스 동기화 현상을 확인할 수 있었다.

• 한국컴퓨터정보학회논문지
• /
• 제20권12호
• /
• pp.67-74
• /
• 2015

The heat conduction equation, a type of a Poisson equation which can be applied in various areas of engineering is calculating its value with the iteration method in general. The equation which had difference discretization of the heat conduction equation is the simultaneous equation, and each line has the characteristic of expressing in sparse matrix of the equivalent number of none-zero elements with neighboring grids. In this paper, we propose a data structure for sparse matrix that can calculate the value faster with less memory use calculate the heat conduction equation. To verify whether the proposed data structure efficiently calculates the value compared to the other sparse matrix representations, we apply the representative iteration method, CG (Conjugate Gradient), and presents experiment results of time consumed to get values, calculation time of each step and relevant time consumption ratio, and memory usage amount. The results of this experiment could be used to estimate main elements of calculating the value of the general heat conduction equation, such as time consumed, the memory usage amount.

• 대한조선학회지
• /
• 제19권1호
• /
• pp.23-32
• /
• 1982

Herein the motion of a freely-floating sphere in a water of finite depth is analysed within the framework of a linear potential theory. A velocity potential describing fluid motion is generated by distributing pulsating sources and dipoles on the immersed surface of the sphere, without introducing an inner flow model. The potential becomes the solution of an integral equation of Fredholm's second type. In the light of the vertical axisymmetry of the flow, surface integrals reduce to line integrals, which are approximated by summation of the products of the integrand and the length of segments along the contour. Following this computational scheme the diffraction potential and the radiation potential are determined from the same algorithm of solving a set of simultaneous linear equations. Upon knowing values of the potentials hydrodynamic forces such as added mass, hydrodynamic damping and wave exciting forces are evaluated by the integrating pressure over the immersed surface of the sphere. It is found in the case of finite water depth that the hydrodynamic forces are much different from the corresponding ones in deep water. Accordingly motion response of the sphere in a water of finite depth displays a particular behavior both in a amplitude and phase.

• 대한조선학회논문집
• /
• 제29권1호
• /
• pp.14-28
• /
• 1992

평면판 요소에 균일한 혹은 선형적인 세기를 갖는 쏘오스 또는 다이폴이 분포된 경우, Stokes 정리를 이용하여, 표면 특이점 분포방법에서 나타나는 표면 적분식을 선적분 형태로 변환할 수 있다. 더우기 판요소가 다각형인 경우, 유기 포텐시얼과 유기속도를 구하기 위한 이 선적분의 closed-forms을 유도하였다. 이들 적분식의 해석적 계산을 통해 계산시간을 단축하고 수치해의 정도를 향상시킬 수 있을 것이다. 몇개의 계산예를 통해 해석적 적분 계산이 수치적 적분보다 우수함을 알 수 있다.

• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.59-68
• /
• 2015

Traditional structure analysis method is based on numerical matrix analysis to use the geometries consisting of the structure. The characteristics require a lot of computer memories and computational time. To avoid these weaknesses, new approach to analyze truss structure was suggested by adopting topological load redistribution method. The axial forces to be not structurely analyzed yet against outside loads were redistributed by using nodal equation of equilibrium randomly at each node without constructing global matrix. However, this method could not calculate the axial forces if structure is statically indeterminate due to degree of many indeterminacies. Therefore, to apply the method suggested in this research, all redundancies of truss structure were replaced by unit loads. Each unit load could make the deformation of a whole structure, and a superposition method was finally adopted to solve the simultaneous equations. The axial forces and deflections agreed with the result of commercial software within the relative error of 1 %, whereas in the case that the axial forces are relatively very smaller than others, the relative errors were increased to 2 %. However, as the values were small enough not to be considered, it was practically useful as a structural analysis model. This model will be used for structural analysis of truss type of large structure such as agricultural farming facility.

• Journal of Power Electronics
• /
• 제9권4호
• /
• pp.654-666
• /
• 2009

Direct torque control (DTC) of induction machines (IM) is a well-known strategy of these drives control which has a fast dynamic and a good tracking response. In this paper a nonlinear DTC of speed sensorless IM drives is presented which is based on input-output feedback linearization control theory. The IM model includes iron losses using a speed dependent shunt resistance which is determined through some effective experiments. A stator flux vector is estimated through a simple integrator based on stator voltage equations in the stationary frame. A novel method is introduced for DC offset compensation which is a major problem of AC machines, especially at low speeds. Rotor speed is also determined using a rotor flux sliding-mode (SM) observer which is capable of rotor flux space vector and rotor speed simultaneous estimation. In addition, stator and rotor resistances are estimated using a simple but effective recursive least squares (RLS) method combined with the so-called SM observer. The proposed control idea is experimentally implemented in real time using a FPGA board synchronized with a personal computer (PC). Simulation and experimental results are presented to show the capability and validity of the proposed control method.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.99-104
• /
• 2007

Tracer gas technique is widely used to measure the ventilation rates and/or ventilation effectiveness of building spaces. However, the conventional method using a single tracer gas can measure only outdoor air change rates in a single zone. This paper deals with the multi-gas tracer technique to measure air exchange rates between rooms. Interzonal air movements are important to characterize overall ventilation performance of complicated multi-zone buildings. Experiments are conducted in a simple two-room model with known airflow rates using tracer gases of SF6 and R134a. The concentration decays of two tracer gases are measured after simultaneous injections in each room. The governing equations are derived from the continuity and the mass balance of each room. The data reduction procedure are developed to obtain the inter-room airflow rates using the governing matrix inversion, and various data manipulation methods are tested, such as data shift, interpolation, smoothing, and etc, to improve the estimate and interpretation of the results.

• 한국해안해양공학회지
• /
• 제4권4호
• /
• pp.219-224
• /
• 1992

이차원 비선형 정상파의 파낭포텐셜과 수면 파형곡선을 임의 계수를 갖는 Fourier 급수로 대치하고 그 계수를 지배방정식 및 경계조건으로부터 비롯되는 비선형 연립방정식의 Newton 해법에 의하여 결정하는 방법을 제시하였다. 해석결과의 유효성을 검증하기 위하여 본 교치분석을 재내의 4차 미소치 섭동기법과 비교하였으며, 또한 파형과 파염을 관측하기 위한 수리실험을 실시하여 그 결과를 수치해석결과와 비교ㆍ검토하였다. 검토 결과, 본 해석 기법은 수심조건에 관계없이 비교적 큰 파형 경사에서도 정확한 해를 주는 것으로 나타났으며 또한 비선형성이 강한 정상파에서 파염곡선의 파봉부분에 일반적으로 나타나는 이중 돌출부를 잘 예측함으로써 그 타당성을 입증하였다.