• 한국시뮬레이션학회논문지
• /
• 제12권2호
• /
• pp.45-53
• /
• 2003

This paper presents a retargetable compiled assembly simulation technique for fast ASIP(application specific instruction processor) simulation. Development of ASIP which satisfies design requirements in various fields of applications such as telecommunication, wireless network, etc. needs formal design methodology and high-performance relevant software environments such as compiler and simulator In this paper, we employ the architecture description language(ADL) named ${HiXR}^2$ to automatically synthesize an instruction-level compiled assembly simulator. A compiled simulation has benefit of time efficiency to interpretive one because it performs instruction fetching and decoding at compile time. Especially, in case of assembly simulation, instruction decoding is usually a time-consuming job(string operation), so the compiled simulation of assembly simulation is more efficient than that of binary simulation. Performance improvement of the compiled assembly simulation based on ${HiXR}^2$ is exemplified with an ARM9 architecture and a CalmRISC32 architecture. As a result, the compiled simulation is about 150 times faster than interpretive one.

• Radiation Oncology Journal
• /
• 제37권3호
• /
• pp.201-206
• /
• 2019

Purpose: To observe the effectiveness of the practical instruction sheet and the educational video for left-sided breast treatment in a patient receiving deep inspiration breath hold (DIBH) technique. Two parameters, simulation time and patient satisfaction, were assessed through the questionnaire. Methods: Two different approaches, which were the instruction sheet and educational video, were combinedly used to assist patients during DIBH procedures. The guideline was assigned at least 1 week before the simulation date. On the simulation day, patients would fill the questionnaire regarding their satisfaction with the DIBH instruction. The questionnaire was categorized into five levels: extremely satisfied to dissatisfied, sequentially. The patients were divided into four groups: not DIBH technique, DIBH without instruction materials, the DIBH with instruction sheet or educational video, and DIBH with both of instruction sheet and educational video. Results: Total number of 112 cases of left-sided breast cancer were analyzed. The simulation time during DIBH procedure significantly reduced when patients followed the instruction. There was no significant difference in simulation time on the DIBH procedures between patient compliance via instruction sheet or educational video or even following both of them. The excellent level was found at 4.6 ± 0.1 and 4.5 ± 0.1, for patients coaching via instruction sheet as well as on the educational video, respectively. Conclusion: Patient coaching before simulation could potentially reduce the lengthy time in the simulation process for DIBH technique. Practicing the DIBH technique before treatment is strongly advised.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.235-240
• /
• 2008

PSC box girder bridges are built through the repetitive manufacturing process of concrete segment. However, during the initial segment manufacturing stage, design change may occur frequently due to design errors and interferences between components, resulting in the extension of segment manufacturing period. This paper aims to verify the manufacturing process of PSC box girder segment by 3D simulation technique. All the components of a segment were modelled and assembled by simulation technique and then, some design errors were found and revised appropriately to optimize the manufacturing process of segment. Consequently, 3D simulation technique would be promising to improve the quality of the segment and to reduce its manufacturing time and cost.

• 산업기술연구
• /
• 제27권A호
• /
• pp.149-155
• /
• 2007

The counter emf(electromotive forces) of a permanent magnet multi-phase brushless motor is generally a non-sinusoidal wave or a non-ideal trapezoid. So, conventional modeling using a sinusoidal wave or an ideal trapezoid counter emf can result in errors. In order to reduce modeling errors for simulation and analysis the properties of a multi-phase brushless AC motor, this paper proposes a phase variable model that is a mixed modeling technique using both Finite Element Analysis(FEA) based circuits and motor voltage equations. The phase model parameters including the counter emf voltage waveform are obtained by using of FEA, and the mixed modeling technique based on circuits and equations is used to implement a simulation model for multi-phase brushless AC motors with any counter emf voltage waveforms. Adequacy of the proposed model is established from the simulation and experimental results for a seven-phase brushless motor.

• 대한산업공학회지
• /
• 제16권1호
• /
• pp.59-65
• /
• 1990

In the design of AGVS (Automated Guided Vehicle Systems), one of the important problem is to determine the number of AGVs required to provide a given level of transport service. At present, there are two kind of methods to determine the number of AGVs, the one is to use the mathematical model, the other is to use the simulation technique. Among these, simulation based technique is more reliable than analytical method. In this sense, this paper intend to determine the optimal number of AGVs using personal computer simulation by SIMAN Ver.3.5.

• 한국시뮬레이션학회논문지
• /
• 제1권1호
• /
• pp.31-36
• /
• 1992

To estimate the probability of long delay in a queuing system using discrete-event simulation is studied. We contrast the coverage, half-width, and stability of confidence intervals constructed using two methods: batch means and new resampling technique; binary bootstrap. The binary bootstrap is an extension of the conventional bootstrap that resamples runs rather than data values. Empirical comparisons using known results for the M/M/1 and D/M/10 queues show the binary bootstrap superior to batch means for this problem.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1992년도 제2회 정기총회 및 추계학술 발표회 발표논문 초록
• /
• pp.13-13
• /
• 1992

To estimate the probability of long delay in a queuing system using discrete-event simulation studied. We contrast the coverage, half-width, and stability of confidence intervals constructed using two methods: batch means and new resampling technique; binary bootstrap. The binary bootstrap is an extension of the conventional bootstrap that resamples runs rather than data values. Empirical comparisons using known results for the M/M/1 and D/M/10 queues show the binary bootstrap superior to batch means for this problem.

• 방사성폐기물학회지
• /
• 제21권1호
• /
• pp.175-182
• /
• 2023

APro, a modularized process-based total system performance assessment framework, was developed at the Korea Atomic Energy Research Institute (KAERI) to simulate radionuclide transport considering coupled thermal-hydraulic-mechanical-chemical processes occurring in a geological disposal system. For reactive transport simulation considering geochemical reactions, COMSOL and PHREEQC are coupled with MATLAB in APro using an operator splitting scheme. Conventionally, coupling is performed within a MATLAB interface so that COMSOL stops the calculation to deliver the solution to PHREEQC and restarts to continue the simulation after receiving the solution from PHREEQC at every time step. This is inefficient when the solution is frequently interchanged because restarting the simulation in COMSOL requires an unnecessary setup process. To overcome this issue, a coupling scheme that calls PHREEQC inside COMSOL was developed. In this technique, PHREEQC is called through the "MATLAB function" feature, and PHREEQC results are updated using the COMSOL "Pointwise Constraint" feature. For the one-dimensional advection-reaction-dispersion problem, the proposed coupling technique was verified by comparison with the conventional coupling technique, and it improved the computation time for all test cases. Specifically, the more frequent the link between COMSOL and PHREEQC, the more pronounced was the performance improvement using the proposed technique.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1998년도 공동추계학술대회 경제위기 극복을 위한 정보기술의 효율적 활용
• /
• pp.827-834
• /
• 1998

This paper describes a multi-level simulation technique and its implementation, which accurately solve voltages and currents of circuits descreibed at mixed levels of abstractions. A metho to form a tightly coupled simulation environment is proposed and, starting from a description of a circuit, simulation set-up and analysis procedure of the multi-level simulator for a transient response are presented. Circuit and behavioral simulation techniques and their implementations composing the multi-level simulation are explained in detail. Most of the algorithms implemented in the simulation are based upon the standard simulation techniques in order to obtain the reliability and accuracy of conventinoal simulators. Simulation examples show that the multi-level simulator can analyze circuits containing highly nonlinear behavioral models without loss of accuracy provided the behavioral models are accurate enough.

• 산업경영시스템학회지
• /
• 제28권3호
• /
• pp.149-155
• /
• 2005

In this paper, we optimize simulation model of a manufacturing system using the real-coded genetic algorithm. Because the manufacturing system expressed by simulation model has stochastic process, the objective functions such as the throughput of a manufacturing system or the resource utilization are not optimized by simulation itself. So, in order to solve it, we apply optimization methods such as a genetic algorithm to simulation method. Especially, the genetic algorithm is known to more effective method than other methods to find global optimum, because the genetic algorithm uses entity pools to find the optimum. In this study, therefore, we apply the real-coded genetic algorithm to simulation optimization of a manufacturing system, which is known to more effective method than the binary-coded genetic algorithm when we optimize the constraint problems. We use the reproduction operator of the applied real-coded genetic algorithm as technique of the remainder stochastic sample with replacement and the crossover operator as the technique of simple crossover. Also, we use the mutation operator as the technique of the dynamic mutation that configures the searching area with generations.