• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.156-159
• /
• 1996

An adaptive predictive control for steam-reforming plant which consist of a steam-gas reformer and a waste heat steam-boiler was studied by using MIMO bilinear model. The simulation experiments of the process identification were performed by using linear and bilinear models. From the simulation results it was found that the bilinear model represented the dynamic behavior of a steam-reforming plant very well. ARMA model was used in the process identification and the adaptive predictive control. To verify the performance and effectiveness of the adaptive predictive controller proposed in this study the simulation results of steam-reforming plant control based on bilinear model were compared to those of linear model. The simulation results showed that the adaptive predictive controller based on bilinear model provides better performance than those of linear model.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.301-308
• /
• 2010

As a new paradigm called modeling and simulation(M&S) or simulation based acquisition(SBA) has arisen, necessity of applying it to Korea has been increased. Not only rational construction of SBA but development of model which can evaluate driving results and improve relating processes to SBA is needed. Therefore we suggests the framework of capability maturity model for M&S development and SBA. The ultimate purpose of our model is improving processes relating to M&S development and SBA. The last section include detailed model which has practices for improving some SBA processes.

• Korean Journal of Agricultural Science
• /
• v.50 no.3
• /
• pp.457-468
• /
• 2023

The purpose of this study is to develop a high-speed combine harvester. The performance was evaluated by composing a dynamic simulation model of a threshing cylinder and analyzing the amount of threshed rice grain during threshing operations. The rotational speed of the threshing cylinder was set at 10 rpm intervals from 500 rpm until 540 rpm, based on the rated rotational speed of 507 rpm. The rice stem model was developed using the EDEM software using measured rice stem properties. Multibody dynamics software was utilized to model the threshing cylinder and tank comprising five sections below the threshing cylinder, and the threshing performance was evaluated by weighing the grain collected in the threshing tank during threshing simulations. The simulation results showed that section 1 and 2 threshed more grains compared to section 3 and 4. It was also found that when the threshing speed was higher, the larger number of grains were threshed. Only simulation was conducted in this study. Therefore, the validation of the simulation model is required. A comparative analysis to validate the simulation model by field experiment will be conducted in the future.

• Journal of the Korea Society for Simulation
• /
• v.9 no.4
• /
• pp.77-85
• /
• 2000

The object of this paper is developing of a simulation model for performance evaluation of ai defense-gun system. We developed a three-step kill probability of areal target in case of one gun on one target considering : 1) estimating the target and warhead intercept point, 2) target vulnerability and 3) computing the kill probability. We used a Monte Carlo simulation method. This model can be used for probabilistic analysis giving results of sufficient accuracy with minimum requirement of input data. Also we developed a computer program according proposed algorithm and a set of experimental results using the proposed method are shown.

• Journal of Korean Library and Information Science Society
• /
• v.13
• /
• pp.131-166
• /
• 1986

This study is designed to review the methods of duplicate copies decision making in the academic library. In this thesis, I surveyed queueing & markov model, statistical model, and simulation model. The contents of the study can be summarized as follows: 1) Queueing and markov model is used for one of duplicate copies decision-making methods. This model was suggested by Leimkuler, Morse, and Chen, etc. Leimkuler proposed growth model, storage model, and availability model through using system analysis method. Queueing theory is a n.0, pplied to Leimkuler's availability model. Morse ad Chen a n.0, pplied queueing and markov model to their theory. They used queueing theory for measuring satisfaction level and Markov model for predicting user demand. 2) Another model of duplicate copies decision-making methods is statistical model. This model is suggested by Grant and Sohn, Jung Pyo. Grant suggested a model with a formula to satisfy the user demand more than 95%, Sohn, Jung Pyo suggested a model with two formulars: one for duplicate copies decision-making by using standard deviation and the other for duplicate copies predicting by using coefficient of variation. 3) Simulation model is used for one of duplicate copies decision-making methods. This model is suggested by Buckland and Arms. Buckland considered both loan period and duplicate copies simultaneously in his simulation model. Arms suggested computer-simulation model as one of duplicate copies decision-making methods. These methods can help improve the efficiency of collection development and solve some problems (space, staff, budget, etc, ) of Korean academic libraries today.

• International Journal of Contents
• /
• v.10 no.3
• /
• pp.84-89
• /
• 2014

The mass-spring model has been typically employed in physical-based simulators for clothes or patches. The mass-spring model frequently utilizes equal mass and the gravity factor. The model structure of masses supports a shape applicable to fishing nets. Therefore, to create a simulation model of a fishing net, we consider the mass-spring model and adopt the tidal-current and buoyancy effects in underwater environments. These additional factors lead to a more realistic visualization of fishing-net simulations. In this paper, we propose a new mass-spring model for a fishing-net and a method to simplify the calculation equations for a real-time simulation of a fishing-net model. Our 3D mass-spring model presents a mesh-structure similar to a typical mass-spring model except that each intersection point can have different masses. The motion of each mass is calculated periodically considering additional dynamics. To reduce the calculation time, we attempt to simplify the mathematical equations that include the effect of the tidal-current and buoyancy. Through this research, we expect to achieve a real-time and realistic simulation for the fishing net.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.5
• /
• pp.134-139
• /
• 2011

Since large and small scale photovoltaic(PV) systems have been commercialized in many countries, it is necessary to assess the effects of PV systems on the electric power system. For this, the development of accurate simulation model of PV arrays is very important. PSCAD/EMTDC, a widely used simulation tool for analyzing the transient behavior of electrical apparatus and networks, does not have a standard model of a PV array. Therefore in order to simulate the PV array, users have to develop their own simulation model. However, the block-diagram-based model is very complicated, and it is hard to modify the model parameters. In this study, we develop the user-defined model of a PV array by using the Design Editor, which is provided by PSCAD program. The mathematical model of a PV array and the method to determine the parameters of nonlinear I-V equation are implemented in a Fortran code. The graphical user interface provides the users with easy and simple way to modify the PV array parameters and simulation conditions. In order to help the users, this model also provides the parameters of 10 commercial PV arrays.

• Journal of the Korea Society for Simulation
• /
• v.24 no.3
• /
• pp.55-60
• /
• 2015

This paper presents an SBA (simulation-based acquisition) effectiveness analysis environment using the RUP (Relational Unified Process) model. The RUP model has 4 phases which cover the whole development steps such as requirement analysis, design, development and test. By applying the RUP model, SW development can be represented with the iterations of developments for each phase. Such a characteristics of the model would make the model suitable for defense acquisition. In this paper, we show the relation between the RUP model and V process model, which is the foundation for defense acquisition. In order to show how the model could be applied to SBA effectiveness analysis, graphical user interfaces for the analysis are presented at the end of the paper.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.105-111
• /
• 1999

The paper presents development of a Hardware-In-the-Loop simulation (HILS) system for the purpose of testing performance, stability, and reliability of an electronic power steering system(EPS). In order to realistically test an EPS by the proposed HILS apparatus, a simulated uniaxial dynamic rack force is applied physically to the EPS hardware by a pnumatic actuator. An EPS hardware is composed of steering wheel &column, a rack & pinion mechanism, andas motor-driven power steering system. A command signal for a pneumatic rack-force actuator is generated from the vehicle handling lumped parameter dynamic model 9software) that is simulated in real time by using a very fast digital signal processor. The inputs to the real-time vehicle dynamic simulation model are a constant vehicle forward speed and from wheel steering angles driven through a steering system by a driver. The output from a real-time simulation model is an electric signal that is proportional to the uniaxial rack force. The vehicle handling lumped parameter dynamic model is validated by a fully nonlinear constrained multibody vehicle dynamic model. The HILS system simulation results sow that the proposed HILS system may be used to realistically test the performance stability , and reliability of an electronic power steering system is a repeated way.

• Journal of the Korea Society for Simulation
• /
• v.3 no.1
• /
• pp.151-165
• /
• 1994

Broadband network based on the Asynchronous Transfer Mode(ATM) concept are becoming the target technology for the emerging Broadband Integrated Services Digital Network(B-ISDN). Since B-ISDN is very complex and requites a great amount of investment, optimum design and performance analysis of such systems are very important. Simulation can be widely used to analyze and examine the broadband network behavior. However, for the complicated system like broadband networks it is extremely difficult and time-consuming to develop a complete model for simulation. In this paper, an object-oriented modeling approach for the broadband network simulation is presented for the effective and efficient modeling. Object-oriented approaches can provide a good structuring capability for complicated simulation models and facilitate the development of reusable and extensible simulation models. We have developed an object-oriented model which consists of object model and behavior model. In the object mode., the components of the broadband network and both constant bit rate(CBR) and variable bit rate(VBR) traffic types of call level, burst level, and cell level are modeled as object classes. In the behavior model, the dynamic features for each object class are represented using the state transition diagram. It has been shown by illustration that objectoriented modeling is an effective tool for modeling the complicated B-ISDN.