• Geomechanics and Engineering
• /
• 제9권1호
• /
• pp.25-37
• /
• 2015

To predict the surface subsidence of salt rock storage, a new surface subsidence basin model is proposed based on the Logistic function from the phenomenological perspective. Analysis shows that the subsidence curve on the main section of the model is S-shaped, similar to that of the actual surface subsidence basin; the control parameter of the subsidence curve shape can be changed to allow for flexible adjustment of the curve shape. By using this model in combination with the MMF time function that reflects the single point subsidence-time relationship of the surface, a new dynamic prediction model of full section surface subsidence for salt rock storage is established, and the numerical simulation calculation results are used to verify the availability of the new model. The prediction results agree well with the numerical simulation results, and the model reflects the continued development of surface subsidence basin over time, which is expected to provide some insight into the prediction and visualization research on surface subsidence of salt rock storage.

• Journal of Ship and Ocean Technology
• /
• 제11권1호
• /
• pp.11-24
• /
• 2007

Better prediction of a ship's manouevrabilty in initial design stage is becoming more, important as IMO manoeuvring criteria has been activated in the year of 2004. In the present study, in order to obtain more exact and reliable results for ship manoeuvrability in the initial design stage, numerical simulation is carried out by use of RANS equation based calculation of hydrodynamic forces exerted upon the ship hull. Other forces such as rudder force and propeller force are estimated by one of the empirical models recommended by MMG Group. Calculated hydrodynamic force coefficients are compared with those obtained by empirical models. Standard manoeuvring simulations such as turning circle and zig-zag are also carried out for a medium size Product Carrier and the results are compared with those of pure empirical models and manoeuvring sea trial. Generally good qualitative agreement is obtained in hydrodynamic forces due to steady oblique motion and steady turning motion between the results of CFD calculation and those of MMG model, which is based on empirical formulas. The results of standard manoeuvring simulation also show good agreement with sea trial results.

• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.8-15
• /
• 2014

In this study, flow characteristics around the hull form of KLNG are investigated by numerical simulations. The numerical simulations of the turbulent flows with the free surface around KLNG have been carried out at Froude number 0.1964 using the FLUENT 6.3 solver with Reynolds stress turbulence model. Several GEOSIM models are adopted to consider the scale effect attendant on Reynolds number. Furthermore, a full scale ship is calculated and the result is compared with the numerical results of GEOSIM models. The calculated results of GEOSIM models and the full scale ship are compared with the experiment data of MOERI towing tank test and Inha university towing tank test. Moreover, wake distribution on the propeller plane of the full scale ship is estimated using the numerical results of GEOSIM models. The prediction result is directly compared with the simulation result in full scale.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권1호
• /
• pp.100-113
• /
• 2017

Snap rolling during hard turning and instability during emergency rising are important features of submarine operation. Hydrodynamics modeling using a high incidence flow angle is required to predict these phenomena. In the present study, a quasi-steady dynamics model of a submarine suitable for high-incidence-angle maneuvering applications is developed. To determine the hydrodynamic coefficients of the model, static tests, dynamic tests, and control surface tests were conducted in a towing tank and wind tunnel. The towing tank test is conducted utilizing a Reynolds number of $3.12{\times}10^6$, and the wind tunnel test is performed utilizing a Reynolds number of $5.11{\times}10^6$. In addition, least squares, golden section search, and surface fitting using polynomial models were used to analyze the experimental results. The obtained coefficients are presented in tabular form and can be used for various purposes such as hard turning simulation, emergency rising simulation, and controller design.

• 환경영향평가
• /
• 제19권2호
• /
• pp.205-213
• /
• 2010

The purpose of this research is to analysis the application of the ISG(Index of Streetscape Greenness) in EIA through case study of Seoul. ISG is a new index which directly expresses human's perceptions of plants in a street and is defined as the area ratio of which leaves of plants occupy an eye-level view of a person standing on the center line of a street. In this research the 42 cases of 3 step reports such as plans, drafts, and final reports which had been passed through the EIA procedure of Seoul were analyzed. The results are as follows: In the drafts frequent mistakes or errors such as unsuitable picture composition, unsuitable sample points, inconsistency of the simulation result with the planting plan, and insufficient numbers of analysis were found, but almost of them were corrected in the final reports. In the most of final reports, the 30% of minimum requirement was satisfied. At all cases the changes of the ISG values were clearly positive. Finally the average current ISG was 19.6%, meanwhile the average proposed ISG was 35.4%. It was verified that the ISG is very practical index to promote green streetscape, but in order to guarantee an achievement a thorough investigation of reports are needed.

• 한국정보통신학회논문지
• /
• 제11권8호
• /
• pp.1558-1563
• /
• 2007

논문은 fractional-N 방식의 주파수 합성기(PLL)를 낮은 차수의 ${\Delta}{\Sigma}$변조기로 더욱 높은 성능의 PLL로 설계하기 위하여 대역폭 가변 방식의 PLL과 ${\Delta}{\Sigma}$방식의 fractional-N PLL의 구조를 합성한 새로운 방식의 PLL을 제안한다. Matla으로 대역폭 가변을 이용한 ${\Delta}{\Sigma}$방식의 fractional-N PLL의 시뮬레이션을 수행하여 제안된 구조의 특성을 관찰하였다. 본 논문의 대역폭 가변 PLL은 HSPICE 0.35um CMOS 공정을 이용하여 시뮬레이션 하였고, 그 결과 제안된 PLL은 빠른 록이 가능하고 fractional spur를 20dB 정도 낮출 수 있었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.501-517
• /
• 2020

Three-dimensional numerical simulations were performed to study the effects of flow direction and flow velocity on the flow regime behind a curved pipe represented by a curved circular cylinder. The cylinder is based on a previous study and consists of a quarter segment of a ring and a horizontal part at the end of the ring. The cylinder was rotated in the computational domain to examine five incident flow angles of 0-180° with 45° intervals at Reynolds numbers of 100 and 500. The detailed wake topologies represented by λ2 criterion were captured using a Large Eddy Simulation (LES). The curved cylinder leads to different flow regimes along the span, which shows the three-dimensionality of the wake field. At a Reynolds number of 100, the shedding was suppressed after flow angle of 135°, and oblique flow was observed at 90°. At a Reynolds number of 500, vortex dislocation was detected at 90° and 135°. These observations are in good agreement with the three-dimensionality of the wake field that arose due to the curved shape.

• 대한조선학회논문집
• /
• 제59권2호
• /
• pp.72-79
• /
• 2022

Deep-learning-based Super-Resolution (SR) methods were evaluated to reconstruct pressure fields with a high resolution from low-resolution images taken from a coarse grid simulation. In addition to a canonical SRCNN(super-resolution convolutional neural network) model, two modified models from SRCNN, adding an activation function (ReLU or Sigmoid function) to the output layer, were considered in the present study. High resolution images obtained by three models were more vivid and reliable qualitatively, compared with a conventional super-resolution method of bicubic interpolation. A quantitative comparison of statistical similarity showed that SRCNN model with Sigmoid function achieved best performance with less dependency on original resolution of input images.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.546-552
• /
• 2013

The future competitiveness of construction industry is dependent on K-12 students. However, unfavorable images of construction industry have negative influence on K-12 students' decision-making of their career. This negative image makes them not want to find out what actually happens in construction industry. Consequently, it is important to give K-12 students the opportunity to know what construction employees actually do in their job. Studies show that K-12 students who encounter the job early-on are more likely to choose it as their career. In this context, this paper proposes construction educational game in which it can serve as a medium for capturing K-12 students' interest in Construction Management (CM). Based on the literature reviews, challenges of construction educational game for K-12 students which are edutainment, hands-on experience and social interaction, are derived. To address these issues, conceptual model and scenario are designed. Based on designed scenario, prototype of Simulation based Construction Game in Virtual World (SCGVW) is developed in Second Life (SL) and applicability test to K-12 students are implemented. This paper concludes with a discussion of the lessons learned and the future development steps of the construction educational game for K-12 students.

• Journal of Ship and Ocean Technology
• /
• 제3권4호
• /
• pp.23-34
• /
• 1999

A Coanda effect which is known to provide a high lift in a high drag condition has been applied to a flapped rudder of a ship. Model experiments and numerical simulations on the Coanda effect of the flapped rudder have been carried out at various situations and the results are compared to each other. It I found that a remarkable increase in the rudder force occur due to the Coanda effect and that the results ould be utilized for the design of a high-lift rudder system.