• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.147-147
• /
• 2018

• 전자공학회논문지C
• /
• 제34C권9호
• /
• pp.10-21
• /
• 1997

In this paper, we propose multiple instruction issuable multi-streaming as a processor architecture for 3D graphics processor. Multistreaming can eliminate inteferences within concurrently executing instructions inthe pipelined processor to allow enough parallelism for parallel processing. Through cycle level simulation study, we show that the proposed architecture outperforms a conventional RISC processor, MIPS R3000 by three times with reasonable resource overheads. Multiple instruction issuable multistreaming processor will be a bood architecture for instruction processor when a large number of threads are guaranteed.

• 대한전기학회논문지
• /
• 제45권3호
• /
• pp.444-450
• /
• 1996

A digital hardware architecture for artificial neural network with learning capability is described in this paper. It is a modified hardware architecture known as HANNIBAL(Hardware Architecture for Neural Networks Implementing Back propagation Algorithm Learning). For implementing an efficient neural network hardware, we analyzed various type of multiplier which is major function block of neuro-processor cell. With this result, we design a efficient digital neural network hardware using serial/parallel multiplier, and test the operation. We also analyze the hardware efficiency with logic level simulation. (author). refs., figs., tabs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.984-988
• /
• 2005

To accomplish various and complex tasks by intelligent robots, improvement is needed not only in mechanical system architecture but also in control system architecture. Hybrid control architecture has been suggested as a mutually complementing architecture of the weak points of a deliberative and a reactive control. This paper addresses a control architecture of robots, and a behavior representation methodology. The suggested control architecture consists of three layers of deliberative, sequencing, and reactive as hybrid control architecture. Multi-layer behavior model is employed to represent desired tasks. 3D simulation will be conducted to verify the applicability of suggested control architecture and behavior representation method.

• 한국국방경영분석학회:학술대회논문집
• /
• 한국국방경영분석학회 2001년도 오늘의 국방경영분석 17권
• /
• pp.160-181
• /
• 2001

• 한국가구학회지
• /
• 제29권1호
• /
• pp.31-39
• /
• 2018

Recently, as the continuously increasing of the one-person households, builders were focusing on a built-in furniture development for efficiency. Through the dead space of the space can be reduced. Also, Condensation that occurs in a built-in furnitures installation space may result in different results depending on the room's direction, floor, finish, adjacent room effect, occupant's lifestyle. In this background, it can be considered in terms of functional aspect and morphological aspect by using WUFI2D simulation system. As a result, the tendency of occurrence of condensation was examined by comparing the water content and the growth potential of fungus graph which came from WUFI2D. Results of this study are as followings: Built-in furniture, both top & bottom open, is more stable to condensation than the built-in furniture with the top or bottom open. Also, Among from the top floor built-in furniture to the bottom of it, the bottom one is more stable to condensation.

• 대한조선학회논문집
• /
• 제46권5호
• /
• pp.498-509
• /
• 2009

Present study is concerned with the simulation of plasticity models for the cyclic stressstrain behavior of aluminum alloy AC4C-T6 that can be used for primary materials of LNG cargo pump. Material model of cyclic hardening and plasticity for aluminum alloy AC4C-T6 was investigated through experiments and numerical simulations. Monotonic tensile and cyclic tension-compression test under symmetric load cycles was performed at both room temperature and cryogenic temperature of $-165^{\circ}C$. Based on the experimental data plastic hardening models were evaluated for isotropic/kinematic/combined hardening. FEA (Finite Element Analysis) models which describe the cyclic stress-strain relationship were evaluated for the simulation of plasticity. An appropriate hardening model is proposed comparing the results of FEA with those of experiments.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.193-196
• /
• 2006

Recently many research are going on in the field of application of Laser and Laser-Arc hybrid welding for superstructures such as ship-structures, transport vehicles etc. Therefore in this study an optimized welding condition and numerical simulation for hybrid welding by using previous numerical analysis which is used to calculate the heat source for Laser and Laser-Arc hybrid welding has been analyzed. For this purpose, fundamental welding phenomena of hybrid process(Laser+MIG) are determined based on the experiments. In order to calculate temperature and residual stress distribution in Laser and Laser-Arc hybrid welds, finite element heat source model is developed on the basis of experiment results and characteristics of temperature and residual stress distribution in Laser and Laser-Arc hybrid welds are understood from the result of simulation and found comparable to the experimental values.

• 한국해양공학회지
• /
• 제27권4호
• /
• pp.62-67
• /
• 2013

In this paper, the wave run.up on a vertical cylinder is presented. Various cross sections of a cylinder were simulated using the panel method for various wave periods. Two.dimensional model tests were performed in a wave flume. The simulation results are compared with the test results. The simulation is based on the linear diffraction theory.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.215-217
• /
• 2014

설계자의 경험에만 의존한 시스템 아키텍처 설계는 설계자 개인의 경험, 지식 수준에 따라 품질수준에 많은 차이를 발생시키고 잘못된 예측에 근거한 하드웨어 용량 산정은 자원의 낭비를 유발한다. 실제 업무 현장에서는 다양한 사후 모니터링 Tool들이 운영되고 있지만, 아키텍처 설계 시에 성능을 예측하여 반영할 수 있다면 최소한의 비용으로 시스템의 성능 요구사항을 만족시킬 수 있고 자원의 낭비를 크게 줄일 수 있다. 이를 위해 하드웨어 아키텍처 설계를 위한 시뮬레이션 모델을 우선 파이롯 형태로 개발하고 실험을 통하여 타당성을 검증하고자 한다. 실험의 결과 오차율이 허용범위 이내에서 발생되면 시뮬레이션 모델이 현실 세계의 정보시스템 아키텍처 특성을 잘 반영하고 있다고 할 수 있다.