• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.739-746
• /
• 2017

Orthogonal frequency division multiplexing(OFDM) systems have many advantages. However, OFDM systems are much affected by a nonlinear distortion because those systems have a high peak to average power ratio(PAPR) value. A selected mapping technology was suggested to reduce a PAPR value. The technology does not have data loss but receivers need side information to know modified phase sequence. Therefore, side information causes decreased a transmission efficiency. In this paper, we suggest a blind SLM receiver using a cross correlation technology. This receiver does not require side information. The proposed blind SLM receiver calculates sums of cross-correlation between transmitted pilot signals multiplied by each phase sequence and received pilot signals. So, this receiver detects side information which has a maximum sum cross-correlation value. We compared our proposed SLM receiver to a conventional blind SLM receiver through bit error rate(BER) and side information error rate(SIER) performances. Simulation results show that the proposed SLM receiver has improved BER and SIER performances than the conventional SLM receiver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.386-396
• /
• 2003

Recently, mobile communication systems have supported various services including internet from voice centric service as they evolve toward 3G. To accommodate the increasing number of users, an AAL2 multiplexing scheme is introduced in the UTRAN tub interface for link efficiency. However, limited radio resources and different requirements of various services make it difficult to guarantee the QoS requirements at radio access networks. The conventional AAL2/ATM multiplexing systems focused on the multiplexing efficiency of voice anddata services and QoS issues of real time and non real time services. In this paper, we classfy various services according to QoS requirements and propose AAL2/ATM multiplexing schemes using statistical multiplexing and scheduling with a rather simple structure to guarantee the given requirements. Simulation results show that the proposed schemes perform better than the conventional schemes to guarantee QoS requirements of various services.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.221-231
• /
• 2006

TCP is needed as a transport protocol to provide reliable end-to-end message delivery for MANETs in order to achieve a smooth integration with the fixed Internet. Particularly, TCP has its variants, namely TCP-Reno and TCP-Vegas. However, there has been no research work on extensive performance comparison of TCP-Reno and TCP-Vegas over AODV and OLSR. This paper is the first trial to perform the research by using ns-2 simulator. Through the extensive simulations, we found that which to select among routing protocols is more important than which to select among TCP variants, because the performance difference between TCP-Reno and TCP-Vegas over uy selected routing protocol is not so much outstanding. Particularly, TCP-Vegas relies on an accurate BaseRTT estimation in order to decide the sending rate of a TCP Sender. However, it cannot be directly applied to MANET because a route change makes the Base an used over a Previous Path obsolete. Therefore, we propose a technique for improving the performance of TCP-Vegas by considering the route change, and show the performance improvement through simulation study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.565-572
• /
• 2007

3G Long Term Evolution (3G LTE) is a next generation cellular networks system capable or providing various mobile multimedia services by using OFDMA and MIMO based radio access technology. Among many differences from existing WCDMA based systems, the facts that 3G LTE uses Physical Resource Block (PRB) as its radio resources and provides all services through the PS domain make the development of new resource management schemes necessary. This paper proposes an adaptive partitioning based downlink call admission control scheme. It separates realtime call requests from non-realtime ones, specifies maximum allowable resource amounts for each type, but if the maximum is exceeded, call requests are accepted with probability proportional to remaining resource amounts. Despite the fact that such adaptive concept has been already adopted by other call admission schemes, the contributions of our paper, which are that we are able to find an efficient way to apply the proposed scheme exploiting PRB characteristics and measure the resource usage of base stations by PRB utilization and payload ratio, are still valid. When judging from simulation results in comparison with others, our scheme is able to prioritize realtime call requests over non-realtime ones, and at the same time, overall system performance is superior.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1046-1054
• /
• 2008

Since the high quality digital TV systems are broadly deployed in the market, the digital video contents will be edited and distributed in MPEG-2 MP@HL fonnat. Due to its impressive coding efficiency, the H.264/AVC codec has rapidly replaced the MPEG-4 SP codec for mobile digital video terminal with low quality. For the bro ad distribution of digitial video contents produced in MPEG-2 format, the MPEG-2 to H.264/AVC transcoding is highly necessary nowadays. In this paper, we propose a fast intra MB prediction mode decision method to reduce the computational complexity in the transcoding, which is the main bottleneck in the transcoders. The proposed method is based on the several relationships such as DCT coefficients and edge orientation, correlation between prediction directions in the $Intra16{\times}16$ and $Intra4{\times}4$ modes, correlation between edge-orientations of luminance an d chrominance components. The simulation results show that the proposed method can reduce the computational complexity upto 70% and 40%, compared with the cascaded transcoder and the well-known fast intraframe transc oder, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.1061-1068
• /
• 2013

In this paper, we propose a $M{\times}M$ beam-space multiple input multiple output (BS-MIMO) system using electronically steerable parasitic array radiator (ESPAR) antenna. Conventional MIMO method required multiple RF chains because it map the transmission signals onto multiple antennas. So, conventional MIMO system has high cost for design and high energy consumption at RF circuit. Also, It is difficult to use MIMO system in battery based mobile terminals with limited physical area. In order to solve these problems, BS-MIMO technique which map the data signal onto bases in beam space domain was proposed using ESPAR antenna with single RF chain. This paper, we design and analyze the performance of extended $M{\times}M$ BS-MIMO technique. Simulation results show that the proposed BS-MIMO system has similar BER performance compare to conventional MIMO scheme. Therefore, BS-MIMO system with single RF chain will has a low RF power consumption and low cost for RF hardware design as compared with conventional MIMO technique with multiple RF chains.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.717-727
• /
• 2003

The HIPERLAN/2(HIgh PERformance Local Area Network Type2) is one of the wireless LAN standards for providing raw data rates of up to 54 Mbps. The MAC protocol of HIPERLAN/2 is based on TDMA/TDD, and resources in one MAC frame can be allocated dynamically by Access Point(AP). The random channel(RCH) is defined for the purpose of giving a mobile terminal the opportunity to request transmission resources in the uplink MAC frames. It is desirable that the number of RCHs is dynamically adapted by the AP depending on the current traffic situation. Allocation of excessive RCHs may waste radio resources and insufficient RCHs compared to traffic loads may result in many collisions in access attempts. We propose an RCH allocation scheme based on split algorithm in HIPERLAN/2. The simulation and analytic results show that the proposed scheme achieves a higher channel throughput, lower access delay and delay jitter than previously proposed RCH allocation schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.975-983
• /
• 2012

Multi network interface has become common phenomenon for mobile devices such as smart phone which has 3G, LTE-advanced, WiFi. Consequently, there are researches for a transmission strategies using multiple paths below on end-to-end connection. MPTCP which is proposed and being standardized by the IETF as a new transport protocol can perform concurrent multipath transfer using multiple network interfaces. However, current MPTCP has performance degradation when it use heterogeneous networks which have quite different network characteristics. Therefore, this paper proposes the packet scheduling scheme and receiver-based recovery scheme to reduce the performance degradation due to reordering problem. Also, simulation results show that the proposed scheme can improve throughput and retransmission performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.11
• /
• pp.979-985
• /
• 2012

The design of an efficient scheduler is a key design factor in IEEE 802.16m systems, in order to support services with various QoS smoothly. Although conventional studies of schedules have been suggested, those had problems that are not able to satisfy the delay condition and make the through-put declined, because they only focused on a specific action scenario rather than reflecting practical action scenarios which have real-time and non-real-time traffics variously. In this paper, an efficient uplink scheduling algorithm is proposed for IEEE 802.16m system by introducing the concepts of Virtual Time(VT) and Virtual Finish Time(VFT) based priority determination, and separate buffers for each QoS class in the mobile terminal. Simulation results showed that the proposed scheme had satisfied the delay requirement of real-time services even with improved throughput performance compared to conventional methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.387-393
• /
• 2007

In this paper, we propose the load control procedure for WiBro system in order to keep the data traffic throughput maximum. The transmitter at a mobile terminal can estimate maximum available power for each user and then the maximum number of subchannels can be calculated considering the total available power. The data traffic throughput and the total throughput (the sum of signaling traffic and data traffic throughput) are considered. As the number of bandwidth requests per frame increases, the data traffic throughput can significantly decrease. Therefore, the load control procedure is indispensible to maintain the data throughput at the maximum level. So, we propose the load control procedure to prevent data traffic throughput from decreasing and evaluate the proposed procedure through the computer simulation under the multi-user environment. The maximum throughput can be maintained by applying the proposed procedure.