• 대한건축학회논문집:구조계
• /
• 제35권10호
• /
• pp.181-190
• /
• 2019

In this study, four reinforced concrete coupling beams were subjected to cyclic lateral loading test to evaluate the structural performance of coupling beam according to volume fraction of steel fiber. For this purpose, the volume fraction of steel fiber(0%, 1%, 2%) and transverse reinforcement spacing were determined as the main parameter. According to the test results, the maximum strength of D-40C-s100-0 was 1.15, 1.13, 1.05 times higher than D-40C-s300-0, D-40C-s300-1, D-40C-s300-2, respectively. The maximum strength of coupling beams with mitigated rebar details increases as the volume fraction of steel fiber increases. Although steel fiber 2% reinforced specimen(D-40C-s300-2) did not satisfy the amount of transverse reinforcement required for seismic design of coupling beam, the overall performance including to maximum strength, ductility and energy dissipation capacity was similar to the control specimen(D-40C-s100-0). As a result, the use of steel fiber with 2% reinforcement can partially replace the transverse reinforcement in diagonally reinforced concrete coupling beam.

• 제어로봇시스템학회논문지
• /
• 제9권11호
• /
• pp.952-957
• /
• 2003

We propose how to translate relay circuits to the EMFGs(Extended Mark Flow Graphs) formally and analyze the original one by using the mark flow of it. Firstly, the concepts of the output condition, the output-on condition and the output-off condition are introduced in the relay circuits. These can be used to find the structure and the operation of respective relay outputs but the sequential operations of them cannot be obtained from these. Secondly, a relay circuit is translated to the corresponding EMFG as the all output-on conditions and all output-off conditions of it are translated to EMFGs. For the adequate translation, the condition arc and the concepts of the generation transition and the degeneration transition are introduced, and the duality for the simplification of the result. Thirdly, we analyze the operation of the original circuit by analyzing the mark flow of the resulting EMFG. We can achieve easy and fast analysis based on the EMFG's operation algorithm. Finally, we apply these to the relay circuit for an electric furnace and analyze its operation with the mark flow of the resulting EMFG. The formal translation from relay circuits to EMFGs makes the analysis easy so that these results can be used to design, modelling, the fault detection and the maintenance.

• 복식문화연구
• /
• 제8권6호
• /
• pp.887-898
• /
• 2000

Mourning & funeral ritual means a various kinds of ritual procedures which begins at the time of death, buried and created a graveyard, a manner of wearing funeral garment being mourning the death, finally go back to everyday life. Our mourning & funeral custom was burial at first time. After going through the era of the Three kingdoms, The unified Shilla and Korea dynasty, cremation method has been prevailed. However, based on Chu-tzu celebration in Chosun dynasty, the burial custom has been widely spread again. Nowadays, due to effective land utilization issue, excessive cost for burial and the change of thinking for cremation, the cremation is recognized as remedy of righteous funeral system. At this point, a shroud following existing burial custom burdens considerably for quality, price, size and design of it. Accordingly, it needs anew style of shroud corresponding to cremation system. As an alternative, the shroud is required simplification and standardization ; Firstly, in size, a shroud should be larger than plain clothes and differentiated in small, medium and large. Secondly, the material of a shroud would be white cotton, which can keep from pollution during burning time. Thirdly, it unifies the item. In case of man, 바지(把特, those are trousers), 저고리(赤古里, Korean-style jacket) and Durumagi(周衣, Korean topcoat). In case of woman, 치마(赤　, those are skirt), 저고리(赤古里, Koran-style jacket) and Durumagi(周衣, Korean topcoat).

• 복식문화연구
• /
• 제13권3호
• /
• pp.425-438
• /
• 2005

This study is to examine the types of expression and aesthetic characteristics of on-line game characters by analyzing those game characters' body and their costume that appear in various domestic on-line game sites. It is shown in this study that types of the human bodies and costume expressed through the game characters are grouped into five categories such as exposure and tightness, enlargement and exaggeration, curtailment and simplification, gender stereotype and unification. Furthermore, there are four typical aesthetic characteristics resulting from those types of expressions; First, 'grotesque' is expressed in the form of extreme enlargement and exaggeration, extreme exposure and concealment, combined images among human, animal or machine, or monstrous devilish images. Second, in an effort to express 'eroticism', bodies are directly exposed, see-through costumes are used in order to emphasize the body lines or very tight designs are used. Third, 'futuristic' characteristics are shown through geometrical shape and silhouette, machine-like details, strong artificial colors or glossy hi-tech material. Lastly, 'pastiche' is expressed with reconciliation of variety of costumes of game characters. Various opposite or heterogeneous styles are combined or harmonized each other to show pastiche, of which examples are male and female, superior culture and inferior one, rich and poor, oriental and western, human and machine, human and nature or past and future, etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.336-339
• /
• 1990

This paper discusses the application of VSCS(Variable Structure Control System) to position control of a trapezoidal type brushless DC motor. In order to simplify the overall control system and to improve the robustness, a new switching function which is composed of linear combination of only measurable state variables Sr(x) and Sr(x) is defined. The proposed new switching function is implemented using a digital signal processor(DSP). A general PWM amplifier is replaced by an ON-OFF pattern generator for the hardware simplification and digitalization. Experimental results are given to demonstrate the validity of the proposed control method.

• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.62-68
• /
• 2022

Considering the characteristics of industrial machines that lack vehicle-induced wind, forced convection by a cooling fan is mostly required. Therefore, numerical analysis of an engine room is usually performed to examine the cooling performance in the room. However, most engine rooms consist of a number of parts and components at specific positions, leading to high costs for numerical modeling and simulation. In this paper, a new methodology for three-dimensional computer-assisted design simplification was proposed, especially for the pile of components and parts at the engine room outlet. A porous media model and regression analysis were used to derive a meta-model for imitating the flow rate reduction at the outlet by the pile. The results showed that the fitted model was reasonable considering the coefficient of determination. The final numerical model of the engine room was then used to simulate the velocity distribution by changing the mass flow rate at the outlet. The results showed that both velocity distributions were significantly changed in each case and the meta-model was valid in imitating the flow rate reduction by some piles of components and parts.

• 한국IT서비스학회지
• /
• 제20권2호
• /
• pp.111-126
• /
• 2021

A Kano model was used to classify the quality attributes of the service robot function for actual deployment that can support and replace bank employees. Quality attributes for a total of 6 dimensions and 23 service elements were divided into bank employees and customer groups, and service priorities were derived after comparative analysis. The Decision tree model was used to supplement the excessive simplification of quality attributes by the modest number of Kano models and to classify and predict by segment market. Of the 23 services, 16 were classified into the same attributes in both groups. 6 services classified as combination attributes used a Decision tree to identify differences in perception of quality attributes among groups. In terms of basic financial services and professional financial services, it was confirmed that bank employees feel financial service robots more attractive than ordinary customers. In the design of IT convergence service, we propose a methodology for deriving quality attributes by combining a Kano model for classifying quality attributes of two groups and a Decision tree for forecasting subdivision markets.

• 한국가구학회지
• /
• 제13권1호
• /
• pp.71-83
• /
• 2002

This study was carried out to develop colored-wood furniture using veneer, small-round log and fiberboard to protect forest resources through the study of minimalism. which advocates the environmental issue inherent to contemporary furniture in the postmodern era. Based on the historical and theoretical context of minimalism closely related to the environmental protection, this study suggested the technical way how to produce the environment-friendly furniture with the least use of valuable and natural log. Finally, the color-wooden furniture was developed based on the asceticism, simplification, and repetition of the minimalism in a trend of contemporary furniture design. By soaking a veneer, Psuedotsuga menziesii and small-round log, Pinus densiflora into a very-diluted organic dye, the environment-friendly and colored-wood furniture could be created in harmony with contemporary interior space, which has showed various colors such as yellow, blue, red, and green with a pastel tone. The spring wood of the colored softwood was deeply stained, while the summer wood was lightly done. By utilizing such valueless used woods which have been little in furniture production, it was possible to decrease the consumption of precious raw log such as zelkova, ebony, rose, maple, cherry, mahogany and so on. Thus, it became obvious to be able for contemporary furniture designers to produce beautiful furniture with dyed fiberboard and small-round logs pregnant with minimalism.

• Composites Research
• /
• 제29권6호
• /
• pp.388-394
• /
• 2016

Fiber reinforced plastic (FRP) composites have drawn increasing attentions worldwide for decades due to its outstanding properties. Stress concentration factor (SCF) as an essential parameter in materials science are critically considered in structure design and application, strength assessment and failure prediction. However, investigation of stress concentration in FRP composites has been rarely reported so far. In this study, three resource-conserving analyses (Isotropic analysis, Orthotropic analysis and Finite element analysis) were introduced to plot the $K_T^A-d/W$ curve for E-glass/epoxy composite plate with the geometrical defect of circular hole placed centrally. The plates were loaded to uniaxial direction for simplification. Finite element analysis (FEA) was carried out via ACP (ANSYS composite prepost module). Based on the least squares method, a simple expression of fitting equation could be given based on the simulated results of a set of discrete points. Finally, all three achievable solutions were presented graphically for explicit comparison. In addition, the investigation into customized efficient SCFs has also been carried out for further reference.

• 한국컴퓨터산업학회논문지
• /
• 제3권5호
• /
• pp.641-652
• /
• 2002

본 논문에서는 IETF CAT Working Group에서 발표한 PKINIT기반의 인증서비스를 향상시킨 Kerberos 인증 메커니즘을 제안한다. PKINIT기반의 X.509, DS/DNS를 적용하여 영역간의 서비스를 제공하는 인증과 키 교환 방식으로 DNS를 통해 외부영역의 위치를 탐색하고 X.509 디렉토리 인증 시스템을 적용, 영역간 인증은 DNS 서버로부터 공개키를 획득하여 다른 영역을 인증하도록 하였다. 영역간 인증과 키 교환은 Kerberos의 관용키 암호방식을 사용하고 세션 연결은 X.509 공개키 방식에 기반을 두고 있다. 효율적인 TGT(티켓승인 티켓) 교환과 티켓의 재사용으로 통신상의 Overload를 감소시키는 효과와 인증절차의 간소화를 가지는 Kerberos 시스템을 설계하였다.