• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.521-532
• /
• 2008

Supporting system design and construction management for the soft and hard rock layers with fractured zones are very important theme for the safety of temporary retaining wall, surrounding ground and structures in the urban deep excavation for the construction of subway, railway, building etc. The prevailing design method of supporting system for the soft and hard rock layers in the deep excavation is mostly carrying out by simplification without proper consideration for the characteristic of rock discontinuities. Therefore the behaviors of rock discontinuities and fractured zones dominate the whole safety of excavation work in the real construction stage, serious disaster due to the failure of temporary retaining wall can be induced in the case of developing large deformations in the ground and large axial forces in the supporting system. This paper introduces examples of deep excavation where the soft and hard rock layers with fractured zones were designed to be supported by shotcrete and rock bolt, deformations of corresponding ground and supporting systems in the construction period and increments of axial force in the upper earth anchors and strut due to the these deformations were investigated through detailed analysis of measurement data, the results were so used for the management of consecutive construction that led to the safe and economical completion of excavation work. The effort of this article aims to improve and develop the technique of design and construction in the coming projects having similar ground condition and supporting method.

• 한국의류산업학회지
• /
• 제1권1호
• /
• pp.34-42
• /
• 1999

The purpose of this study was to change practical korean costume in 20C. In the early 20C, inflow of western civilization started to change korean costume. Since then gradually changes to be simple in Korean costume. Results of this study can be summarized as follows: Traditional jacket (jeo-go-li) gradually began to be long to waist line. This jacket length was to be long and it sleeve is to be short in early 2OC. Traditional skirt (Chi-rna) length was short to the calf of the leg. Traditional wide skirt was gradually to be narrow and pleats shape look as if it in go-gu-Ryeo Dynasty. The width of pleats was about 3~5 cm, be one-sided, look as if it western style in today. But pleats skirt already existed on a women's of the upper classes in go-gu-Ryeo Dynasty. Women's long Coat (do-lu-ma-gi) length was short to under hip line in late 20c. In this way, the practical idea, the factor of design was because of western idea in civilization ages, early 20C. Since then gradually reformed to be simple in Korean costume. Assuming that the trend of simplification in Korean costume is related to the idea of practical. Therefore Korean costume of living or a reformed Korean costume to be design of practical, functional, convenient, economically. And it must have to traditional idea, it is only beauty of shape, pattern, line, fabric in Korean costume.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.1029-1036
• /
• 2024

Drawing on the deep experience and understanding of the principles of nuclear safety, as well as many years of nuclear power plant design and operation, the EDF led NUWARD SMR Project is developing a design for a Small Modular Reactor (SMR) of 340 MWe composed of two 170 MWe independent units, that will supplement the offering of high-output nuclear reactors, especially in response to specific needs such as replacement of fossil-fuelled power plants. NUWARD SMR is a mix of proven and innovative design features that will make it more commercially competitive, while integrating safety features that comply with the highest international standards. Following the principles of redundancy and diversity and rigorous application of Defence in Depth (DID), with an international view on nuclear safety licensing, the Project also incorporates new safety approaches into its design development. The NUWARD SMR Project has been in development for a number of years, it entered conceptual design formally in mid-2019 and entered Basic Design in 2023. The objective of the concept design phase was to confirm the project technological choices and to define the first design configuration of the NUWARD SMR product, to document it, in order to launch pre-licensing with the French Safety Authority (ASN) and to define its estimated cost and its subsequent development and construction schedules. As a delivery milestone the Safety Options file (called the Dossier d'Options de Sûreté (DOS)) has been submitted to ASN in July 2023 for their opinion. An integral part of the NUWARD SMR Project, is not only to deliver a design suitable for France and to satisfy French regulation, but to develop a product suitable and indeed desirable, for the international market, with a first focus in Europe. In order to achieve its objectives and realise its market potential, the NUWARD SMR Project needs to define and realise its safety approach within an international environment and that is the key subject of this paper. The following paper: • Summarises the foundation principles and technological background which underpin the design; • Contextualises the key design features with regard to the international safety regulatory framework with particular emphasis on innovative passive safety aspects; • Illustrates the Project activities in preparation for first licensing in France, and also a wider international view via the ASN led Joint Early Review of the NUWARD SMR design, including Finnish and Czech Republic regulators, recently joined by the Swedish, Polish and Dutch regulators; • Articulates the collaborative approach to design development from involvement with the Project partners (the Commissariat à l'énergie atomique et aux énergies alternatives (CEA), Naval Group, TechnicAtome, Framatome and Tractebel) to the establishment of the International NUWARD Advisory Board (INAB), to gain greater international insight and advice; • Concludes with the focus on next steps into detailed design development, standardisation of the design and its simplification to enhance its commercial competitiveness in a context of further harmonisation of the nuclear safety and licensing requirements and aspirations.

• Geomechanics and Engineering
• /
• 제27권6호
• /
• pp.561-571
• /
• 2021

Cofferdams made of teel sheet piles are commonly utilized as support structures for excavation of sea-crossing bridge foundations. As cofferdams are often subject to tide variation, it is imperative to consider potential effects of tide on stability and serviceability of sheet piles, particularly, ultralong steel sheet piles (USSPs). In this study, a real USSP cofferdam constructed using new construction technology in Nanxi River was reported. The design of key parts of USSP cofferdam in the presence of tidal action was first introduced followed by the description of entire construction technology and associated monitoring results. Subsequently, a three-dimensional finite-element model corresponding to all construction steps was established to back-analyze measured deflection of USSPs. Finally, a series of parametric studies was carried out to investigate effects of tide level, soil parameters, support stiffness and construction sequence on lateral deflection of USSPs. Monitoring results indicate that the maximum deflection during construction occurred near the riverbed. In addition, measured stress of USSPs showed that stability of USSP cofferdam strengthened as construction stages proceeded. Moreover, the numerical back-analysis demonstrated that the USSP cofferdam fulfilled the safety requirements for construction under tidal action. The maximum deflection of USSPs subject to high tide was only 13.57 mm at a depth of -4 m. Sensitivity analyses results showed that the design of USSP cofferdam system must be further improved for construction in cohesionless soils. Furthermore, the 5th strut level before concreting played an indispensable role in controlling lateral deflection of USSPs. It was also observed that pumping out water before concreting base slab could greatly simplify and benefit construction program. On the other hand, the simplification in construction procedures could induce seepage inside the cofferdam, which additionally increased the deflection of USSPs by 10 mm on average.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.179-184
• /
• 2013

An accident from machine work is often fatal to the worker. This accident is mostly preventable through perfect process jig. In case of this machine work, however, the disaster frequently occurred because of the design which is not considered the beginning of product design, post-process and mass process of production. As for sand casting method, this has the merits of the production; the product is easily produced by manual labor. On the other hand, this method has the demerits of a bigger dimensional error contrary to other mass process of production. When the sand casting product is in machine work, there are various problems such as unsafe fix and excessive cutting, product desorption and rapid life depreciation of equipment and tools. Considering the characteristics of sand casting method, it is accepted as difficulty to improve the problems. In this study, it suggests shell mold method for mold instead of the machine work after the sand casting of the circle shape container product. And the surface accomplishes the following average of surface roughness Ra$9.94{\mu}m$ of machine work with the casting of flask mold by shell mold method. In accordance with the simplification of processing process and reducing the average thickness variation by mass production of product with detailed appearance, it has a good influence on safety accident prevention caused by production and damaged product. It is confirmed that making higher degree of size precision of all machine work product is possible to increase the safety and productivity, reduce the processing process and improve environment.

• 복식
• /
• 제61권1호
• /
• pp.58-68
• /
• 2011

With Expo 2012 Yeosu to be held in 2012, this study intends to propose designs for fashion cultural products into which the characteristics of local cultures of Yeosu are fused. Using symbols of Expo 2012 Yeosu and cultural symbols of Yeosu City as motifs, this study will develop patterns and then, apply them to neckties, handkerchiefs, and T-shirts. Adobe Illustrator CS2 and Adobe Photoshop CS2 will be used. This study developed basic motifs so that cultural resources using camellia, Odong Island, and the Turtle Ship, which represent Yeosu City, could be well harmonized with the topic of Expo 2012 Yeosu. This paper set three basic motifs of new formative images, using graphic images that were made by omission of forms, simplification, overlap, repetition, and calligraphy of the name of Yeosu holding the event. Each set motif was expanded to three motifs again through change, conversion, and mixture of colors, and three types of repetitive applied patterns were developed through revolution, symmetry, repetition, and reversal of each motif. The modern and refined image for neckties, to which the developed motif was applied, was made by directly applying the repetitive pattern of each motif or by making $45^{\circ}$ revolution. For handkerchiefs, revolution, enlargement, reduction, and gradation were applied to the motif so the pattern could be highlighted to the maximum and finally, a colorful image was developed. For T-shirts, three designs-a half-sleeved box type, a sleeveless round neckline type, and a sleeveless V-neckline tight type-were developed, through which availability of the design was increased. Through enlargement, reduction, revolution, and repetition of each motif, this paper layout the pattern on the whole part of a T-shirt, pursuing a decorative and casual image.

• 한국조경학회지
• /
• 제26권2호
• /
• pp.293-307
• /
• 1998

This study has been divided into two parts, 1) literature review and 2) a case study. Based on literature review and case studies found in Korea and abroad, this study aimed at classifying wildlife passages and establishing their development procedures in order to establish a theoretical ground for the development of wildlife passage as a way to link habitats that have been fragmented by the construction of roads and other developments. The results of the literature review are as follows : 1) Impact of road construction on surrounding ecological environment is found in various aspects. Along with damage of habitats as direct impact, decrease of biodiversity and simplification of species due to limited breeding and movement are cited as possible indirect impact. 2) In order to lessen the impact generated from fragmented habitats, various types of wildlife passage are being developed in Europe and are showing positive results. 3) In Korea, interests on animal passages have been rising recently. The ministry of Environment and local authorities are establishing development plans for the passages. However, practical materials on the usefulness of adoped methods are not available.4) In order to create an effective wildlife passage, decisions have to be made first on basic factors of planning and designing such as ecosystem rehabilitation methods and surveys on wildlife movement routes and habitat environment. Based on this, in a planning and designing stage, the location and type of a passage, size and measures to attract animals and prevent a collision need to be finalized. This should be followed by a series of process of maintenance, management and monitoring after the development. Based on the results of a theoretical study to develop an wildlife passage, Part 2 of this study deals with the results of an experiment through a specific planning and design that includes a process of ecological surveys, site selection, type selection, ecosystem infrastructure, planting design and construction details on an actual study area and presents them as a model project.

• 문화기술의 융합
• /
• 제9권6호
• /
• pp.113-122
• /
• 2023

본 연구는 문화 & 소프트 파워(soft power)가 주도하는 지식정보사회에 있어서 전통문화의 유물자산을 활용한 문화상품 개발을 전제로 진행하였다. 통일신라시대 전통건축에서 출토된 와당 유물의 문화콘텐츠 상품 가능성을 탐색하고 주얼리 디자인에 활용성이 높은 상품화 모티브의 확장성을 넓히는 맥락에서 진행되었다. 먼저 문헌과 매체 연구를 통하여 와당의 원형과 소재, 용도, 크기, 의미, 조형적 심미성을 파악하였다. 고찰된 와당중에서 카테고리별 대표성과 모듈·패턴화 가치가 있는 10종류의 와당을 선택하여 '형태적 단순화 기법'으로 원형이미지를 추출·모듈화하였다. 문양구성 배열형식 체계화 방법인 '수학적 대칭성 분석기법'에 근거하여 문화콘텐츠산업 및 주얼리디자인 개발시에 활용할 수 있는 평면적 조형요소를 도출하였다. 향후 주얼리산업에서의 활용성 확대를 위하여 2D 디지털이미지로 제시하였다. 향후에도 전통문화를 매개로 하는 다양한 문화콘텐츠산업에 관한 연구가 더한층 활성화되기를 기대한다.

• 한국강구조학회 논문집
• /
• 제15권6호통권67호
• /
• pp.611-620
• /
• 2003

강합성교량에서 19mm 또는 22mm 직경을 갖는 전단연결재가 일반적으로 사용되고 있다. 강교 상세의 단순화와 향후 바닥판 제거의 용이성 및 프리캐스트 바닥판 전단포켓의 효율적인 배치를 위해서는 대직경 스터드 전단연결재가 필요하다. 현재의 전단연결재 설계범위를 넘어서는 대직경 스터드 전단연결재에 대한 push-out 실험을 통해서 정적거동에 관한 항목들을 검토하고 기존 설계식과의 비교를 수행하였다. 25, 27, 30mm 직경의 스터드에 대한 전단실험을 통해서 탄성영역에서의 전단강성을 평가하고 세 개의 직선으로 구성된 하중-상대변위 곡선을 제안하였다. 파괴시의 극한상대변위를 평가하고 극한강도를 유로코드-4의 설계식과 비교하여 설계의 안전율을 평가하였다. 또한 30mm 스터드의 경우는 용접과 콘크리트 지압능력의 개선이 필요한 것으로 나타났다.

• International Journal of Control, Automation, and Systems
• /
• 제1권3호
• /
• pp.339-350
• /
• 2003

In this paper, we propose a simultaneous multithreading (SMT) architecture that improves instruction throughput by exploiting instruction level parallelism (ILP) and thread level parallelism (TLP). The proposed architecture issues and completes instructions belonging to the same thread in exact program order. The issue and completion policy greatly reduces the design complexity and hardware cost of our architecture, compared with others that employ out-of-order issue and completion. On the other hand, when the instructions belong to different threads, the issue and completion orders for those instructions may not necessarily be identical to the fetch order. The processor issues instructions simultaneously from multiple threads to functional units by exploiting ILP and TLP, and by dynamic resource sharing. That parallel execution notably improves performance and resource utilization with minimal additional hardware cost over the conventional superscalar processors. This paper proposes an SMT architecture with grouping as well as one without grouping. Without grouping, all threads dynamically and flexibly share most resources. On the other hand, in the SMT architecture with grouping, in which resources and threads are divided into several groups for design simplification, resources are shared only among threads belonging to the same group as those resources. Simulation results show that our processors with four and eight threads improve performance by three or more times over the conventional superscalar processor with comparable execution resources and policies, and that reasonable grouping reduces the design complexity of SMT processors with little negative effect on performance.