• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.819-824
• /
• 2005

Recently, micro hydropower attracts attention because of its clean, renewable and abundant energy resources to develop. However, suitable turbine type is not normalized yet in the range of micro hydropower and it is necessary to study for the effective turbine type. Moreover, relatively high manufacturing cost by the complex structure of the turbine is the highest barrier for developing the micro hydropower turbine. Therefore, a cross-flow turbine is proposed for micro-hydropower in this study because of its simple structure and high possibility of applying to low head. The purpose of this study is to further simplify the turbine structure and improve the performance, A guide vane is removed and the runner chamber is made compact using a new air supply method. The results show that the efficiency of the turbine is improved in a wide operating range and the size of the turbine is remarkably reduced.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.999-1003
• /
• 1996

In this study, underdeveloping heavy-load driving servo control system, which are composed of controller, electro-hydraulic servo-valve, hydraulic motor, reduction gear box, turret slew bearing and turret structure, are investigated to simplify the control system. To estimate the effect of each component, model ins and simulation of linear and nonlinear system are carried out. In the first stage, to prove the retiability of performance estimation pro-gram, simulation results are compared with experimental results. In the second stage, the effect of each component of control system is evaluated and then a simplified control system is suggested.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.5-6
• /
• 2010

Needs for the methodology of segmentation of linear feature according to the shape characteristics of line feature are increasing in cartographic linear generalization. In this study, the line segmentation method using expansible moving window is presented. This method analyzes the generalization effect of line simplification algorithms depend on the line characters of linear feature and extracts the sections which show exclusively low positional error due to a specific algorithm. The description measurements of these segments are calculated and the target line data are segmented based on the measurements. For segmenting the linear feature to a homogeneous section, expansible moving window is applied. This segmentation method is expected to be used in the cartographic map generalization considering the shape characteristics of linear feature.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.195-202
• /
• 2006

Tight-fitting clothing pattern reflecting the accurate information of the 3D body shape has been one of the challenges for garment industry, however, fitting problems still exist. The objectives of the paper is to develop a 2D pattern which fits tightly to the 3D human scan data for sports suits that need comfort and function for maximum performance. In this study, the user graphic interface application software for the semi-automatic garment pattern generation has been implemented using the triangle simplification scheme together with 2D projections of free-falling of 3D surface polygons keeping the original 3D surface area preservation. A typical application of the developed pattern to the functional body suits is presented and verification of the proposed method is also provided.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.636-643
• /
• 1995

The accurate determination of the fuel-cladding gap conductance as functions of rod burnup and power level may be a key to the design and safety analysis of a reactor. The incorporation of a sophisticated gap conductance model into nuclear design code for computing thermal hydraulic feedback effect has not been implemented mainly because of computational inefficiency due to complicated behavior of gap conductance. To avoid the time-consuming iteration scheme, simplification of the gap conductance model is done for the current design model. The simplified model considers only the heat conductance contribution to the gap conductance. The simplification is made possible by direct consideration of the gas conductivity depending on the composition of constituent gases in the gap and the fuel-cladding gap size from computer simulation of representative power histories. The simplified gap conductance model is applied to the various fuel power histories and the predicted gap conductances are found to agree well with the results of the design model.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.3
• /
• pp.402-414
• /
• 2010

A survey was conducted to study the ingredient and the nutrition of Yukwa consumed in Jeonbuk region. Additional survey was performed to the adult population in Jeobook region to identify the recognition and improvement of Yukwa. The ingredient and baking process varies from each region. The modernization of Yukwa baking process requires introduction of new flavour using new ingredient and simplification of the baking process as these two factors are holding back the modernization of the Yukwa. Top quality Yukwa can be produced by standardized baking process, using top quality agricultural goods, cultivated in Korea. The key to making Yukwa more accessible to the public is by simplifying the current baking process, including the drying process Bandegi, which is the most complicated process of all.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.04a
• /
• pp.367-372
• /
• 2008

21세기 국제항공운송 수요는 아시아의 급속한 수출입 화물량의 증가에 힘입어 지속적으로 증가하고 있으며, 항공물류 이해관계자들은 이러한 항공화물의 수요를 충족시키기 위해 시설 및 정보시스템 등에 대한 투자를 확대하고 있다. 하지만 항공물류 프로세스 전반에 걸친 시설 및 정보 시스템의 투자가 아닌 항공물류 주체별 개별 투자로 인해 동일한 목적을 지닌 시스템이 중복되게 사용되고 있으며, 상호 호환성에도 문제가 존재한다. 본 연구에서는 항공물류 프로세스 전반을 분석하고, 전술한바와 같은 물류 주체간개별 시스템의 호환성을 제고하기 위하여 RFID(Radio Frequency IDentification)기술을 도입한 항공물류 통합시스템을 제안함으로써, 항공물류 프로세스의 간소화 방안을 모색하고자 한다.

• International Journal of CAD/CAM
• /
• v.8 no.1
• /
• pp.37-40
• /
• 2009

Based on the study of Digital Elevation Simplification Model and fractal theory, this paper put forward a new method to simulate complex terrain. That use simplified DEM data to construct terrain frame based on the quad tree at first, and then use fractal to generate the details of every node of the tree. In the process of construction, the LOD theory is used to simplify the terrain and get its typical data. According to the change of view position and direction, the paper gives a new way to judge the visibility of the surface patch. Experimental results show that this algorithm is simple, efficient and supports the real time dynamic simulation of terrain model.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.1
• /
• pp.61-67
• /
• 2014

This paper proposes a procedure enabling the extraction of view-dependent triangular approximations from a height map. In general, procedures to approximate a height map use tree hierarchies. These methods, however, have a limitation in terms of accuracy, because they depend on tree hierarchy than terrain features. To overcome the difficult, we apply the simplification method for triangular meshes to a height map. The proposed procedure maintains full decimation procedure to support multiresolution. The maintenance of decimation procedure results in creation of the groups (trees), each of which consists of vertices that can be merged into one vertex (root node). As the groups have tolerance which is determined by some tests, they support the generation of view-dependent arbitrary triangular meshes.

• The Research Journal of the Costume Culture
• /
• v.12 no.4
• /
• pp.497-510
• /
• 2004

This research shows problems of modem Mourning Garments used in Gwangju area compared to traditional ones. Researches are as fellowed; First, items of mourning garments have been not used by degrees. Male has worn Jung-Dan and Du-ru-mak-i as Pyo-Eui of male mourning garments. Second, mourning garments have been simplified and modified. These simplification in shape and uniformity in size are only far Mass production and convenient manufacture. Third, modem mourning garments are made of 6-su (thin) Hemp cloth. In fact this material has no hemp and is just made of cotton and chemical textiles. Even though it is not made of hemp, it has been sold with the name of Hemp Cloth. Materials should be clearly listed. Forth, traditional mourning garments are manufactured through needlework while modern ones through mass production. Now the former is expensive rather than the latter. So Mass produced garments would be preferred to traditional made ones.