• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.25-31
• /
• 2016

In this paper, a study on the development of OpenFOAM grid generation program for two-dimensional flow analysis is described. By using the pre-processor(eMEGA) of EDISON_CFD system, grids for OpenFOAM flow calculation were obtained. Resultant two-dimensional grids were used to calculate flow fields by applying simpleFoam, one of the OpenFOAM's popular solvers, and the obtained flow results were compared with theoretical and experimental data available. Also grids generated by present program were compared with grids by a commercial pre-processor Pointwise for the purpose of verification. Verification work includes three cases(single block, O-type single block, and multi block grid), and all results show reasonable matches. According to the current achievement, it can be concluded that OpenFOAM grid can be constructed conveniently by using eMEGA with GUI.

• 한국전산유체공학회지
• /
• 제18권2호
• /
• pp.49-55
• /
• 2013

The goal of the research is to evaluate the open source code of OpenFOAM for the use of nuclear plant flow simulation objectively. Of the various incompressible flow solvers, simpleFoam, pimpelFoam are then tested under three validated cases (backward facing step, flow over circular cylinder and turbulent round jet flow). For the evaluation of steady state incompressible laminar flow simulation, low reynolds number of backward facing step flow was solved by simpleFoam. The resultant of the reattached lengths turned out to be similar with the other experimental and simulation results. For transient flow simulation, flow over circular cylinder and turbulent round jet flow were solved by pimpleFoam. The simulation accuracy was evaluated by comparing the resultant flow patterns with the description of the characteristics of the flow over the circular cylinder. The quantitative accuracy was evaluated for no more than 85% by comparing it to the decaying constants of the turbulent round jet velocity.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1570-1575
• /
• 2004

In order to evaluate the performance of fire-fighting agents used to protect structures from heat and fire damages, the thermal characteristics of fire-protection foams are experimentally investigated. The current research focuses on the destruction of a fire-fighting foam subjected to heat radiation. A simple repeatable test for fire-protection foams subjected to fire radiation is developed. This test involves foam generation equipment, a fire source for heat generation, repeatable test procedures, and data acquisition techniques. Results of the experimental procedure indicated that each thermocouple within the foam responded in a similar manner and gradually to a temperature of $15^{\circ}C{\sim}20^{\circ}C$. At this point, each trace generally rises to a temperature of approximately $90^{\circ}C$. The temperature gradient in the foam as time passes increases with increased foam expansion ratio. In addition, it is determined that the temperature gradient along the foam for depth decreases with increased foam expansion ratio.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제9권1호
• /
• pp.1-11
• /
• 2004

다공성 매질내의 거품(foam)은 가스상의 이동성을 감소시키는 특성을 가진다. 이러한 성질은 석유산업에서 중력으로 인한 유체유동을 방지하거나 산(acid)을 이용하여 유정(wellbore) 근처 유체투과율이 낮은 지층을 처리하는데도 사용될 뿐만 아니라, 지하 대수층의 오염물 회수율을 높이는 데도 사용된다. 최근의 연구결과를 통하여 다공성 매질 내 거품의 유동은 유동영역(flow regime)에 의하여 크게 영향을 받는다는 사실을 규명하였다. 이 논문은 실험자료와 수치해석기법을 이용하여, 지하 오염물질 정화를 위한 거품 유동분할 작업의 타당성에 관한 연구이다. 두 종류의 유체 투과율(k=9.1과 30.4 darcy)을 가지고 실험한 결과, 대수층 조건과 비슷한 실험환경에서도 정상상태의 거품은 유동영역에 따라 다른 성질을 보인다는 사실을 알 수 있었다. 거품의 질이 낮은 영역(low-quality regime)에 있는 거품은 shear thinning 거동을 보이며 고질영역(high-quality regime)에 있는 거품은 Newtonian 거동과 유사하였다. 이상의 실험 결과를 유체투과율이 서로 다른 두 지층에 대하여 거품의 유동분할을 예측하기 위하여 간단한 수치해석 모델을 개발하였다. 수치해석의 결과로부터 고질영역에 있는 거품은 유동분할 양상을 보였지만 저질영역에 있는 거품은 그렇지 않았다. 민감도 분석의 결과 고질영역에서의 유동분할은 각 지층들의 한계 모세관압, 즉 거품이 생성되고 유지되기 위한 최소 모세관압에 의해 좌우된다는 사실을 확인하였다.

• 대한기계학회논문집B
• /
• 제29권1호
• /
• pp.151-158
• /
• 2005

A characteristic of discharge for a foam spray nozzle with various parameters was investigated. The discharge patterns from a fire foam spray nozzle are important to evenly spray over a maximum possible floor area. Two parameters of a foam spray nozzle were chosen, and compared with those from the standard one. Also, in order to evaluate the performance of discharged foam agents used to protect structures from heat and fire damages, the thermal characteristics of fire-protection foams were experimentally investigated. A simple repeatable test for fire-protection foams subjected to fire radiation was developed. This test involves foam generation equipment, a fire source for heat generation, and data acquisition techniques. Results show that the bubble size of foam is increased by large inside diameter of orifice or closed air hole, but phenomenon of discharge angle and expansion ratio is opposite. For the case of the open air hole, liquid film of a circular cone discharges with formation, growth, split and fine grain. In case of the closed air hole, a pillar of foam solution discharges with that. Though the temperature gradient in the foam increases with increased foam expansion ratio. it is not change with increased intensity of heat flux.

• KSBB Journal
• /
• 제19권5호
• /
• pp.399-405
• /
• 2004

A reticulated PU-g-PAAc foam was modified through the surface treatment of PU foam by one atmospheric pressure plasma. The synthesized PU-g-PAAc foam was prepared for the purpose of immobilizing microbial organisms. We also attempted different plasma treatment methods including simple plasma treatment, plasma induced grafting and plasma induced grafting followed by plasma re-treatment. The effect of grafting on equilibrium water content (EWC) of PU forms was examined by swelling measurements. Adhesion test was performed to investigate the effect of different plasma treatment methods on the improvement of microbial immobilization. Two foams modified by plasma induced grafting and plasma re-treatment after grafting showed 2.7 and 3.0 fold higher microbial immobilization than unmodified one, respectively. Meanwhile, simple plasma treatment showed a little enhancement. FT-IR analysis of each sample verified the contribution of surface functional groups on the enhancement of microbial immobilization. SEM observation confirmed microbial adherence.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.537-551
• /
• 2017

In this paper, a two-phase flow solver $HiFoam^{(R)}$ has been developed based on the $OpenFOAM^{(R)}$ to predict resistance of a ship in calm water. The VOF method of $OpenFOAM^{(R)}$ was reviewed and a simple flux limiter was introduced to enhance the robustness of the solver. The procedure for predicting ship motion was modified by introducing Quasi-Steady Fluid-Body Interaction (QS-FBI) with least square regression to improve the efficiency. Other minor factors were considered as well in terms of the efficiency and robustness. The HiFoam was applied to KCS and JBC simulations to validate its efficiency and accuracy by comparing the results to experimental data and STAR-CCM+. The $HiFoam^{(R)}$ was also applied to various ships and it showed good agreements to the experimental data.

• KSBB Journal
• /
• 제7권3호
• /
• pp.172-178
• /
• 1992

담체로 사용된 polyurethane foam은 Rizopus chinensis의 균사가 부착하여 안정하게 증식할 수 있게 하였다. 고정화를 위해 사용된 네 종류의 polyurethane foam중 GP-160이 고정하ㅗ 매체로 우수한 성질을 보였고, 입자의 크기는 7-8mm가 적당하였다. Rizopus chinensis의 현탁 배양과 polyurethane foam에서의 고정화 배양을 비교할 때, 전체 리파아제의 활성도는 큰 변화가 없었지만, 고정화 배양의 경우 extracellualar lipase의 생성을 억제하여 intracellular lipase의 활성도를 현탁 배양의 경우보다 약 2배가량 높일 수가 있었다. 고정화 세포의 열안정성을 조사하기 위하여 35~$50^{\circ}C$사이에서 열에의한 비활성화 에너지값을 구해본 결과, 그 값이 28.7kcal/mol로서 본 연구에서 제조된 고정화 세포의 생촉매가 배교적 좋은 열안정성을 갖고 있다.

• Archives of Reconstructive Microsurgery
• /
• 제18권1호
• /
• pp.35-39
• /
• 2009

Purpose: Various techniques have been attempted for design of the flaps. However, there are some disadvantages. They have thin, pliable, and two dimensional methods. The aim of this study is to report usefulness of polyurethane foam dressing materials for three dimensional design of the digital island flap. Methods: From June of 2007 to september of 2008, 10 patients received digital island flap surgery for soft tissue defect of the finger. After minimal debridement of the wound, size and shape of the defect were measured using polyurethane foam. We used Medifoam-$5^{(R)}$ And then, designed this inset the wound. The flap was designed on the donor site with a arterial pedicle as the central axis according to size and shape. A full thickness skin graft from the groin is applied on the flap donor defect and secured with a tieover bolster dressing. Results: Reviewing sizes of the flaps, the length and width of flaps ranged from 1.5 to 3.3 cm and 1.0 to 2.5 cm. The PACS(Picture Archiving Communication System) program allows identification of the donor depth of finger. The distance for the soft tissue ranged from 4.3 mm to 6.7 mm. Mean depth of donor site was 5.3${\pm}$0.6 mm. Also, the thickness of Medifoam-$5^{(R)}$ ranged nearly 5 mm. On flap insetting, full-thickness skin graft was necessary. We did not experience any problems in the recipient site size either, regardless of the extended flaps. Conclusion: Polyurethane foam has many advantages over the more conventional templates. Refinements in flap design and surgical technique resulted in favorable functional and cosmetic results. Especially, for beginner, Polyurethane foam dressing material is a simple and safe tool and therefore is an excellent choice for design of the island flap.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.19-29
• /
• 2008

최근에 $135^{\circ}C^{\circ}C$ 이하의 온도에서 생산되는 중온형 아스팔트 혼합물의 새로운 생산 기술이 전세계적으로 개발되고 있다. 본 연구에서는 가열 아스팔트보다 낮은 온도에서 아스팔트를 효과적으로 골재에 분산시켜 코팅할 수 있는 폼드 아스팔트 기술을 이용하여 중온형 아스팔트 혼합물을 생산하였으며, 최근 개발된 새로운 Simple Performance Testing 장비를 이용하여 다양한 온도와 하중조건 하에서 중온형 폼드 아스팔트 혼합물의 공용성 특성을 평가하였다. 중온형 폼드 아스팔트 혼합물은 FG 64-22의 아스팔트를 거품상태로 만들어 중온으로 가열된 골재에 뿌려서 제조하였으며, 중온형 아스팔트 혼합물은 중온의 골재에 FG 64-22의 아스팔트를 액상 상태로 첨가하여 제조하였다. 중온형 폼드 아스팔트 혼합물은 중온형 아스팔트 혼합물보다 높은 동탄성계수와 Flow Number를 나타내었다. 따라서, $100^{\circ}C$로 가열된 골재를 사용하여 생산된 중온형 폼드 아스팔트 혼합물은 중온형 아스팔트 혼합물에 비하여 피로균열 및 소성변형 저항에 우수한 것으로 평가되었다.