• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.539-546
• /
• 2019

Global warming has mentioned as one of the international problems and these researches have conducted. Carbon Capture, Utilization and Storage (CCUS) technology has improved due to increasing importance of reducing emission of carbon dioxide. Among of various CCUS technologies, mineral carbonation can converted $CO_2$ into high-cost materials with low energy. Existing researches has been used ions extracted solid wastes for mineral carbonation but the procedure is complicated. However, the procedure using seawater is simple because it contained high concentration of metal cation. This research is a basic study using seawater-based wastewater for mineral carbonation. 3 M Monoethanolamine (MEA) was used as $CO_2$ absorbent. Making various concentrations of seawater solution, simulated seawater powder was used. Precipitated metal carbonate salts were produced by mixing seawater solutions and $rich-CO_2$ absorbent solution. They were analyzed by X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Thermogravimetric Analysis (TGA) and studied characteristic of producing precipitated metal carbonate and possibility of reusing absorbent.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.10
• /
• pp.147-160
• /
• 2008

This paper presents the results of full-scale loading tests performed on 54 passive anchors and 4 group anchored footings grouted to various lengths at several sites in Korea. The test results, the failure mechanisms as well as uplift capacities of rock anchors depend mostly on rock type and quality, embedded fixed length, properties of the discontinuities, and the strength of rebar. Anchors in poor quality rocks generally fail along the grout/rock interfaces when their depths are very shallow (a fixed length of less than 1 m). However, even in such poor rocks, we can induce a more favorable mode of rock pull-up failure by increasing the fixed length of the anchors. On the other hand, anchors in good quality rocks show rock pull-up failures with high uplift resistance even when they are embedded at a shallow depth. Laboratory test results revealed that a form of progressive failure usually occurs starting near the upper surface of the grout, and then progresses downward. The ultimate tendon-grout bond strength was measured from $18{\sim}25%$ of unconfined compressive strength of grout. One of the important findings from these tests is that the measured strains along the corrosion protection sheath were so small that practically the reduction of bond strength by the presence of sheath would be negligible. Based on test results, the main parameters governing the uplift capacity of the rock anchor system were determined. By evaluation of the ultimate uplift capacity of anchor foundations in a wide range of in situ rock masses, rock classification suitable for a transmission tower foundation was developed. Finally, a very simple and economical design procedure is proposed for rock anchor foundations subjected to uplift tensile loads.

• Journal of KIISE:Software and Applications
• /
• v.28 no.2
• /
• pp.179-191
• /
• 2001

Comparison shopping is a merchant brokering process that finds the best price for the desired product from several Web-based online stores. To get a scalable comparison shopper, we need an agent that automatically constructs a simple information extraction procedure, called a wrapper, for each semi-structured store. Automatic construction of wrappers for HTML-based Web stores is difficult because HTML only defines how information is to be displayed, not what it means, and different stores employ different ways of manipulating customer queries and different presentation formats for displaying product descriptions. Wrapper induction has been suggested as a promising strategy for overcoming this heterogeneity. However, previous scalable comparison-shoppers such as ShopBot rely on a strong bias in the product descriptions, and as a result, many stores that do not confirm to this bias were unable to be recognized. This paper proposes a more scalable comparison-shopping agent named MORPHEUS. MORPHEUS presents a simple but robust inductive learning algorithm that antomatically constructs wrappers. The main idea of the proposed algorithm is to recognize the position and the structure of a product description unit by finding the most frequent pattern from the sequence of logical line information in output HTML pages. MORPHEUS successfully constructs correct wtappers for most stores by weakening a bias assumed in previous systems. It also tolerates some noises that might be present in production descriptions such as missing attributes. MORPHEUS generates the wrappers rapidly by excluding the pre-processing phase of removing redundant fragments in a page such as a header, a tailer, and advertisements. Eventually, MORPHEUS provides a framework from which a customized comparison-shopping agent can be organized for a user by facilitating the dynamic addition of new stores.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.66-73
• /
• 2015

Alveolar bone loss and deformation can be a risk factor in removable prosthetic restoration treatment for partially or fully edentulous patients. The use of implants to solve this problem could improve the support, retention and stability of removable restoration. Attachments used in implant overdenture are versatile. The attachment should be selected according to the patients' conditions. Milled bar has been chosen when readymade bar could not be used because of the narrow distance between implants or firm stability and support of supra-structure were needed. Milled bar design is able to provide cross arch stabilization and comfortability to patients. However, it needs skilled laboratory procedures. Recently, the fabrication of milled bar has become simple and its suitability has been improved through the development of CAD/CAM system. In a 67-year-old female Alzheimer's disease patient with 8 implant fixtures on the fully edentulous site of mandible, implant overdenture with using milled bar and magnet attachment was planned. As rapid treatment was required, CAD/CAM system was used to make a simple laboratory procedure instead of a traditional fabrication process. With this system, implant overdenture with milled bar can be fabricated esthetically and functionally.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.317-322
• /
• 1999

Dens invaginatus is a developmental anomaly resulting from an invagination of the enamel organ. The incidence is highest with maxillary permanent lateral incisors. The reported occurrence ranges from 0.04 to 10%. This anomaly may involve the pulp and periapical tissues and cause pulpal inflammation, loss of vitality, apical and lateral periodontitis, periapical abscesses and cysts and stimulate internal resorption. Oehlers describes dens invaginatus as occurrence in three forms. In treating type 3 invaginatus, treatment strategy can be determined by considering the complexity and accessibility of invagination. In this case, showing simple invagination, it could be treated by simple endodontic treament confining to invagination without loss of vitality of tooth. After treatment of the present case, the results were as follows: 1. In type 3 dens invagiantus, if the tooth is vital and there is no evidence of communicating between invagination and pulp, we can save the vitality of the tooth and resolve the lesion by endodontic treament confining to the invagination. 2. In the invagination with opened apex, the closure of apex can be induced by apexification procedure doing this, we can avoid the neccessity of surgical intervention.

• Archives of Plastic Surgery
• /
• v.37 no.2
• /
• pp.137-142
• /
• 2010

Purpose: Tumor ablation and traumatic intractable ulceration of the plantar surface of the foot results in skin and soft tissue defects of the weight-bearing sole. Simple skin grafting is not sufficient for reconstruction of the weight-bearing areas. Instead, the island medial plantar flap (instep flap) and distally-based island medial plantar flap was used for proper reconstruction of the weight bearing area. However, there are some disadvantages. In particular, an island medial plantar flap has a short pedicle limiting the mobility of the flap and the distally-based island medial plantar flap is based on a very small vessel. We investigated whether good results could be obtained using a reverse island medial plantar flap based on the lateral plantar vessel as a solution to the above limitations. Methods: Three patients with malignant melanoma were cared for in our tertiary hospital. The tumors involved the lateral forefoot, the postero-lateral heel, and the medial forefoot area. We designed and harvested the flap from the medial plantar area, dissected the lateral and medial plantar artery and vena comitans, and clamped and cut the vessel 1 cm proximal to the branch from the posterior tibial artery and vena comitans. The medial plantar nerve fascicles of these flaps anastomosed to the sural nerve, the 5th interdigital nerve, and the 1st interdigital nerve of each lesion. The donor sites were covered with skin grafting. Results: The mean age of the 3 subjects was 64.7 years (range, 57 - 70 years). Histologically, all cases were lentiginous malignant melanomas. The average size of the lesion was $5.3\;cm^2$. The average size of the flap was $33.1\;cm^2$. The flap color and circulation were intact during the early postoperative period. There was no evidence of flap necrosis, hematomas or infection. All patients had a normal gait after the surgery. Sensory return progressively improved. Conclusion: Use of an island medial plantar flap based on the lateral plantar vessel to the variable weight-bearing sole is a simple but useful procedure for the reconstruction of any difficult lesion of the weight-bearing sole.

• Journal of Chest Surgery
• /
• v.20 no.3
• /
• pp.451-457
• /
• 1987

Reoperations following cardiac surgery have an increased risk of the danger of damaging the heart, great vessels or extracardiac grafts because of adhesions to the sternum. We experimentally evaluated 3 different methods for pericardial closure. A standardized procedure for induction of pericardial adhesions was carried out in 30 rabbits. For closure of pericardium, animals were divided into 3 groups, 10 animals respectively: Croup 1 [simple pericardial closure]The pericardium was primarily resuture; Group 2 [Core-Tex surgical membrane as a pericardial substitute]- A Gore-Tex surgical membrane was interposed between the sternum and the heart; and Group 3 [pericardial tension releasing technique]-Three longitudinal overlapping incisions were made on the right side of the pericardium while the midline incison was sutured. Animals were put to death 4 weeks postoperatively and the pericardial space was examined for pericardial adhesions and epicardial reactions. The extent of adhesions and reactions were graded as: I-none; II-minimal; III-moderate; and IV-severe. Histologic studies of the pericardium, the pericardial substitute and the epicardium were also performed. The results were as follows: 1. In group 1 [simple pericardial closure], the degree of pericardial adhesions were grade I in 1 animal, grade II in 2, grade III in 4 and grade IV in 3. Epicardial reactions were grade I in 1 animal, grade II in 3, grade III in 5 and grade IV in 1. Histologic examination revealed thick fibrous tissue that obliterated the pericardial space in 7 animals. 2. In group 2 [Gore-Tex surgical membrane as a pericardial substitute], the degree of pericardial adhesions were grade I in 3 animals, grade II in 3, grade III in 2 and grade IV in 2. The degree of epicardial reactions were grade II in 1 animal, grade III in 5 and grade IV in 4. Histologic studies revealed a thin layer of dense fibrous tissue which covered the Gore-Tex surgical membrane and thick loose fibrous tissue on the epicardium just beneath the substitute. 3. In group 3 [pericardial tension releasing technique], the degree of pericardial adhesions were grade I in 3 animals, grade II in 4, grade III in 2 and grade IV in 1. The degree of epicardial reactions were grade 1 in 4 animals, grade II in 4 and grade III in 2. Severe epicardial reactions were not observed in this group. Histologic examination showed normal epicardium in 4 animals and the epicardium of the other 6 animals only revealed very thin fibrous layer compared to group I and group II. Pericardial adhesions more than grade III were 70% in group 1, 40% in group 2 and 30% in group 3. Pericardial adhesions were reduced in group 2 and group 3 compared to group 1, but statistically not significant. Epicardial reactions more than grade III were 60% in group 1, 90% in group 2 and 20% in group 3. Epicardial reactions were significantly reduced in group 3 compared to group 2. Author`s modified pericardial releasing technique provides marked augment of pericardial surface area and facilitates tension-free pericardial closure. Furthermore, pericardial adhesion and epicardial reaction will be reduced with the pericardial tension releasing technique.

• Composites Research
• /
• v.13 no.2
• /
• pp.30-39
• /
• 2000

It is difficult for civil engineer to apply composite materials of laminated type to structure for civil construction because of complicated theory although those have much merit. A simple method by which one can predict "exact" values of the natural frequency of vibration of laminated plates is presented. Many laminates with particular orientations have negligible values of $B_{16}$ and $B_{26}$ as the number of plies increases. Such laminates, with $D_{16}$ = $D_{26}$ ->0 can be solved by the same equation as for the special orthotropic laminates(1991,1995). If the quasi-isotrpic constants are used, It is possible to simplify analysis procedure since the equations for isotropic plates can be used. Use of some coefficients can produce "exact" values for laminates with such configuration. This coefficient, in fact, represents the effect of the anisotropy of the laminate. D. H. Kim proposed to use a correction factor, he developed, to produce "exact" solution out of the approximate solution obtained by using the quasi-isotropic constants(1995). In this paper, the fiber orienation studied is [$\alpha$/$\beta$/$\beta$/$\gamma$/$\alpha$/$\alpha$/$\beta$]r, with $\alpha$=-$\beta$, and $\gamma$${\gamma}$=$0^{\circ}$ or $90^{\circ}$ and the above-mentioned method is used to obtain the natural frequencies of plates with such orientations, and detailed result is presented for the use of engineers.nted for the use of engineers.

• Research in Plant Disease
• /
• v.21 no.4
• /
• pp.315-320
• /
• 2015

Soybean mosaic virus (SMV) is a prevalent pathogen that causes significant yield reduction in soybean production worldwide. SMV belongs to potyvirus and causes typical symptoms such as mild mosaic, mosaic and necrosis. SMV is seed-borne and also transmitted by aphid. Eleven SMV strains, G1 to G7, G5H, G6H, G7H, and G7a were reported in soybean varieties in Korea. A reverse transcription loop-mediated isothermal amplification (RT-LAMP) method allowed one-step detection of gene amplification by simple procedure and needed only a simple incubator for isothermal template. This RT-LAMP method allowed direct detection of RNA from virus-infected plants without thermal cycling and gel electrophoresis. In this study, we designed RT-LAMP primers named SML-F3/B3/FIP/BIP from coat protein gene sequence of SMV. After the reaction of RT-LAMP, products were identified by electrophoresis and with the detective fluorescent dye, SYBR Green I under daylight and UV light. Optimal reaction condition was at $58^{\circ}C$ for 60 min and the primers of RT-LAMP showed the specificity for nine SMV strains tested in this study.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.4
• /
• pp.332-340
• /
• 2011

Objective : Pyogenic spondylitis often results in acute neurological deterioration requiring adequate surgical intervention and appropriate antibiotic treatment. The purpose of this study was to conduct an analysis of the clinical effect of continuous irrigation via laminotomy in a series of patients with pyogenic spondylitis in thoracic and lumbar spine. Methods : The authors conducted a retrospective investigation of 31 consecutive patients with pyogenic thoracic and lumbar spondylitis who underwent continuous irrigation through laminotomy from 2004 to 2008. The study included 22 men and 9 women, ranging in age from 38 to 78 years (mean 58.1 years). The average follow-up duration was 13.4 months (range, 8-34 months). We performed debridement and abscess removal after simple laminotomy, and then washed out epidural and disc space using a continuous irrigation system. Broad spectrum antibiotics were administered empirically and changed according to the subsequent culture result. Clinical outcomes were based on the low back outcome scale (LBOS), visual analogue scale (VAS) score, and Frankel grade at the last follow-up. Radiological assessment involved plain radiographs, including functional views. Results : Common predisposing factors included local injection for pain therapy, diabetes mellitus, chronic renal failure, and liver cirrhosis. Causative microorganisms were identified in 22 cases (70.9%) : Staphylococcus aureus and Streptococcus spp. were the main organisms. After surgery, LBOS, VAS score, and Frankel grade showed significant improvement in most patients. Spinal stability was maintained during the follow-up period, making secondary reconstructive surgery unnecessary for all patients, except one. Conclusion : Simple laminotomy with continuous irrigation by insertion of a catheter into intervertebral disc space or epidural space was minimally invasive and effective in the treatment of pyogenic spondylitis. This procedure could be a beneficial treatment option in patients with thoracolumbar spondylitis combined with minimal or moderate destructive change of vertebrae.