• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.461-468
• /
• 2016

Illustration, which is shown in the textbook for educational purpose is used to explain basic educational theory, rather than carrying meaning itself. It has proper educational value when presented appropriately according to the process of knowledge acquirement. This research organized new analyzing criterion for the frame and content analysis subjected on 4 sanitation textbooks of middle school, moreover looked into actual situation by convergent analysis. This is for political suggestion that is helpful to further textbook development; by understanding improvement point required in reaching educational purpose presented in health education course manual. Results are as following. First, in the aspect of frame, diagrams with proper function to explain principle of health and sanitary activities should be more frequently suggested. Second in the aspect of content, illustrations for simple data providing or for decoration should be reduced while illustrations suggesting experimental results should be added, to reorganize health textbook according to the purpose of health education course.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.301-308
• /
• 2015

To reduce the weight of a railroad vehicle, a bogie frame skin is considered for manufacture using an RTM process and composite material. Compared to other processes, RTM has merits in that it demands only simple manufacturing facilities and can produce a large and complex structure in a short cycle time. On the other hand, it is important to determine the proper number and locations of gates and vents to prevent void formation inside a structure. In this study, we numerically predicted the flow pattern in a bogie frame skin during the RTM process by distinguishing the permeability of a fiber mat as isotropic or anisotropic. Using the results, we analyzed the RTM process conditions of the bogie frame to predict skin void formation, mold filling time, and optimum location of vents depending on the permeability conditions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.6
• /
• pp.517-525
• /
• 2015

A grid connected inverter must be operated as the main electricity source under an isolated condition caused by the grid problem. Conventionally, the dual loop controller is used for the grid inverter, and the controller is used for control under the stand-alone mode. Generally, the PI(Proportional - Integral) controller is highly efficient under a synchronous reference frame, and stable control can be available. However, in this synchronous frame-based control, high-quality DSP is required because many sinusoidal calculations are necessary. When the PI control is conducted under a stationary frame, the controller constructions are made simple so that they work even with a low-price micro controller. However, given the characteristics of the PI controller, it should be designed with the phase of reference voltage considered. Otherwise, the phase delay of the output voltage can occur. Although the current controller also has a higher bandwidth than the voltage controller, distortion of the voltage is difficult to avoid only by the rapid response of the PI controller, as a sudden load change can occur in the nonlinear load. In this study, a new control method that solves the voltage controller bandwidth problem and rapidly copes with it even in the nonlinear load situation is proposed. The validity of the proposed method is proved by simulation and experimental results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1377-1383
• /
• 2012

The first frame of a GOP is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the intial QP for the first frame affects the first frame as well as the following frames. Traditionally, the initial QP is determined among four constant values only depending on the bpp. Although this initialization scheme is simple, yet it is not accurate enough. An accurate intial QP prediction scheme should not only depends on bpp but also on the complexity of the video sequence and the output bandwidth. In this paper, we propose a traffic model for finding the optimal initial QP which maximizes the PSNR of the GOP. We also propose a method to find model parameters for real-time video encoding. It is shown by experimental results that the proposed traffic model captures initial QP characteristics effectively and the proposed method for model parameters accurately estimates the real values.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.76-84
• /
• 2021

In this study, an optimal stiffness model of the C-frame, which was supporting the mold and tool load, was proposed to obtain quality self-piercing riveting (SPR) joining. First, the load path acting on the C-frame structure was identified using topology optimization. Then, a final suggested model was proposed based on the load path results. Stiffness and strength analyses were performed for a rivet pressing force of 7.3 [t] to compare the design performance of the final proposed model with that of the initial model. Moreover, to examine the reliability of continuous and repeated processes, vibration analysis was performed and the dynamic stiffness of the final proposed model was reviewed. Additionally, fatigue analysis was performed to ascertain the fatigue characteristics due to simple repetitive loading. Finally, stiffness test was performed for the final proposed model to verify the analysis results. The obtained results differed from the analysis result by 2.9%. Consequently, the performance of the final proposed model was superior to that of the initial model with respect to not only the SPR fastening quality but also the reliability of continuous and repetitive processes.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.160-163
• /
• 1991

Permanent Magnet Synchronous Motor(PMSM) has merits in both simple electrical controllability of dc motor and mechanical reliability of ac motor by applying vector control. The vector control method orients the armature current phasor to be perpendicular to the permenant magnet rotor flux in a two-axis coordinate frame, and provides control characteristics that are similar to those of separately excited dc motors. This paper presents a simple model following scheme for position control of PMSM fed by hysteresis current-controlled PWM inverter. The simulation results show the validity of the proposed control method.

• IE interfaces
• /
• v.12 no.4
• /
• pp.540-550
• /
• 1999

In evolutionary algorithm, there exist various models for the evolution of the population with respect to schemes and strategies for reproduction. In the application of the algorithm to a specific problem, one model suitable to the problem is to be properly chosen and a program expert or a software is needed to help implement and test a designed algorithm. In this study, the software for simple evolutionary algorithms(SEA) with one population is developed. The software is designed as an application framework type, so that it may be friendly, allow users to add some program, and operate under the environment of Windows. For this, hierarchical classes for components of SEA are first designed by means of an object-oriented approach and then a library for SEA is built by them. With the library, developed is an application framework that can generate a frame code for an application program. The software proposed here can be used as a generalized tool for solving problems in a wide range of domains.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.247-249
• /
• 2008

There are many types of grid-connected inverter controllers; Synchronous Reference Frame (SRF)-based controller is the most popular methods. SRF-based controller is capable for reducing both of zero-steady state error and phase delay. However, SRF-based controller has a complex algorithm to apply in real application such as digital processor. Resonant controller is also reduced zero-steady state error, but its transfer function has a high order. In this paper, a simple proportional control is applied for grid connected inverter with LCL filter. LCL filter is a third order system. Applying a simple proportional controller is not increased the order of closed loop transfer function. By this technique, the single phase model is easily obtained. To reduce steady state error, proportional gain is set as high as possible, but it may produce instability. To compromise between a minimum steady state error and stability, the single phase model is evaluate through Root Locus and Bode diagram. PSIM simulation is used to verify the analysis.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1288-1291
• /
• 2002

In this paper, we present a design of mpeg-4 video codec chip to reduce the power consumption using frame level clock gating and motion estimation skip scheme. It performs 30 grames/s of codec (encoding and decoding) mode with quarter-common intermediate format(QCIF) at 27MHz. A novel low-power techniques were implemented in architectural level, which is 35% of the power dissipation for a conventional CMOS design. This chip performs MPEG-4 Simple Profile Level 2(Simple@L2) and H.263 base mode. Its contains 388,885 gates, 662k bits memory, and the chip size was 9.7 mm x 9.7 mm which was fabricated using 0.35 micron 3-layers metal CMOS technology.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.11
• /
• pp.1048-1052
• /
• 2013

Recently, many countries have attempted to protect their satellites from damage caused by space debris. To design these collision avoidance maneuvers, optimal algorithms based on numerical simulations are widely used due to their practicality. However, these algorithms often require a great expenditure of time in order to find solutions. Therefore, in this paper, a simple analytical strategy is suggested to find the initial prediction required to find these numerical solutions for collision avoidance maneuvers by using relative dynamics for the rendezvous and docking problems. For this analytical strategy, the simple dynamics on the CW (Clohessy-Wiltshire) frame is adopted as an attempt to introduce an analytical solution.