• Macromolecular Research
• /
• v.16 no.2
• /
• pp.108-112
• /
• 2008

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) analysis of nonpolar polymeric materials is affected by the sample preparation as well as the matrix and cationizing agent. This study examined the influence of silver salt types on the MALDI analysis of polybutadiene (PB). Silver trifluoroacetate (AgTFA), silver benzoate (AgBz), silver nitrate ($AgNO_3$), and silver p-toluenesulfonate (AgTS) were used as the silver salts to compare the MALDI mass spectra of PB. The mixture solution of PB and 2,5-dihydroxybenzoic acid (DHB), as a matrix dissolved in THF, was spotted on the sample plate and dried. A droplet of the aqueous silver salt solution was placed onto the mixture. The mass spectrum with AgBz showed the clear $[M+Ag]^+$ ion distribution of PB while the mass spectrum with AgTFA did not show $[M+Ag]^+$ ions but only silver cluster ions. The mass spectra with $AgNO_3$ and AgTS did not show a clear $[M+Ag]^+$ ion distribution. The difference in the formation of $[M+Ag]^+$ ions of PB depending on the silver salts was attributed to the silver cation transfer reaction between the silver salt and the matrix (DHB). The mass spectrum showed a clear $[M+Ag]^+$ ion distribution of PB when the conjugate acid of the silver salt was less acidic than the matrix.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1993-1996
• /
• 2010

Silver nanoparticles has been prepared by the $\gamma$-irradiation and in situ reduction methods. Based on the Raman spectra, TEM images, X-ray Diffraction (XRD) patterns and UV-vis spectra, the in situ reduction method is more stable and the average size of the silver nanoparticles is also smaller than by the $\gamma$-irradiation reduction method. It is identified that the silver ions interacting with nonbonding electrons of oxygen atom in the carbonyl group of polyvinylpyrrolidone (PVP) by the in situ reduction method. It is also found advantages of the in situ reduction method including no additional reducing agents, without $\gamma$-irradiations treatment and the room temperature treatment suitability.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.6
• /
• pp.486-491
• /
• 2017

Silver nanowire (AgNW) transparent electrode is one of next generations of flexible and transparent electrode. The electrode shows high conductivity and high transparency comparable to ITO. However, the electrode is weak against heat. The wires are separated into nanodots at temperature above $200^{\circ}C$. It causes the electrical resistance increase. Moreover, it is vulnerable to oxygen and moisture in the atmosphere. The improvement of thermal and moisture resistance of silver nanowire transparent electrode is the most important for commercializing. We proposed silver nanowires transparent electrode which is capped with very thin nickel oxide layer. The nickel oxide layer is five nanometers of thickness, but the heat and moisture resistance of the transparent electrode is effectively improved. The AgNW/NiO electrode can endure at $300^{\circ}C$ of temperature for 30 minutes, and resistance is not increased for 180 hours at $85^{\circ}C$ of temperature and 85% of relative humidity. We showed an applications of transparent and flexible heater using the electrode, the heater is operated more than $180^{\circ}C$ of temperature.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.1
• /
• pp.87-91
• /
• 2016

The development of high performance transparent electrode with flexibility have been required for flexible electronics. Here, we demonstrate the silver nanowire and reduced graphene oxide hybrid transparent electrode for replacing brittle indium-tin-oxide electrode by spray coating technique and plasma reduction. The spray coating system is applied to deposit silver nanowire and over coated graphene oxide films and it has a great potential to scale-up. The resistance of silver nanowire transparent electrode is reduced by 10% and the surface roughness is decreased after graphene oxide coating. The over-coated graphene oxide is successfully reduced by $H_2$ plasma treatment and it is effective in increasing the environmental stability of electrode. The lifetime of silver nanowire and reduced graphene oxide hybrid electrode at $85^{\circ}C$ of Celsius degree of temperature and 85% of relative humidity has much increased.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.305-324
• /
• 1997

Numerous materials such as amalgam, IRM, SuperEBA, dessicated ZOE, and Ketac-Silver have been used as a root-end filling material or to repair furcation perforations. But so far no material has been found to satisfy all of the requirements of an ideal restorative material. Recently, mineral trioxide aggregate (MTA) has been suggested for use as a root end filling material and for the repair of furcation perforations. The purpose of this study was to compare the effect of MTA on the proliferation of MC3T3/E1 osteoblastic cell, formation of bone nodule, alkaline phosphatase activity, and finally the tissue reaction of bone with those of amalgam, IRM, SuperEBA, dessicated ZOE, and Ketac-Silver. The following conclusions were drawn within the limits of the experimental results : 1. MTA showed a excellent proliferation of osteoblastic cell and Ketac-Silver showed moderate proliferation of osteoblastic cell. The rest of test materials showed no proliferation of osteoblastic cell. 2. Many of definite bone nodules were found in the MTA group. In contrast, Ketac-Silver group showed no definite bone formation but only showed mild sign of bone formation. 3. Alkaline phosphatase activity of Ketac-Silver and MTA showed similar results. But both of them showed higher activity than that of other materials (p<0.005). 4. The tissue reaction to implanted MTA in the calbarium of mouse was milder than that observed with other materials. The tissue reaction of dessicated ZOE showed the worst results among the test materials.

• Analytical Science and Technology
• /
• v.19 no.2
• /
• pp.121-130
• /
• 2006

In this study, silver pre-treated activated carbons are transformed using sulfuric acid. From the results of adsorption, each isotherm shows a distinct knee band, which is characteristic of microporous adsorbents with capillary condensation in micropores. In order to reveal the causes of the differences in adsorption capacity and specific surface area after the samples were washed with various strengths of sulfuric acid, surface morphology and external pore structure were investigated by SEM. X-ray diffraction patterns indicated that Ag-activated carbons show better performance for silver and silver compounds removal by post-treatment with acid. The FT-IR spectra of silver-activated carbon samples show that the acid post-treatment was consequently associated with the removal of silver with an increased surface functional group containing oxygen of the activated carbon. The type and quality of oxygen groups are determined on the method proposed by Boehm. For the chemical composition microanalysis of silver-activated carbons transformed by post-treatment with sulfuric acid, samples were analyzed by EDX.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.05a
• /
• pp.34.2-34.2
• /
• 2007

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.24.2-24.2
• /
• 2007

• Journal of the Korean Chemical Society
• /
• v.47 no.1
• /
• pp.26-30
• /
• 2003

The dinuclear $Ag_2[Phen]_2[S_2P(OPr)_2]_2$(phen=1,10-phenanthroline; Pr=propyl), was prepared by the reaction of bis(dipropyldithiophosphato) silver(I) complex with 1,10-phenanthroline ligand, and its structure was determined by X-ray crystallography. The two dipropyldithiophosphato ligands each bridge two silver atoms to form an eight-membered $Ag_2S_4P_2$ ring, while the 1,10-phenanthroline molecule coordinates to a silver atom to complete the local tetrahedral geometry for the metal ion. The Ag-S bond distances are 2.559(1) and 2.567(1)${\AA}$, and the Ag-N bond distances are 2.366(3) and 2.471(3)${\AA}$.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.810-814
• /
• 2004

This study is one of the fundamental researches for the development of future smart clothing and textile products using silver(Ag) nano powder. Our study was focused on the blocking or insulating effects of nano-processed textiles from electromagnetic waves. Also, for the surveying of the actual effect to human body, we measure the variation of electroencephalogram which is an indication of human physical symptoms. Among various textiles in this experiment, nano silver processed case has shown the best blocking performance from the electromagnetic waves, which decreases depending on the distance. As a reference model of working environment, we setup the visual stimuli object on the computer that is a source of electromagnetic wave. The power spectrum distribution and the incidence of electroencephalogram was measured. The analysed data has shown that, with nano-processed textiles, ${\beta}$ wave does not appear very often where ${\beta}$ wave appears only to illustrate the stable states of human's body. However, as for the materials without nano processing, the ratio of ${\gamma}$ waves in the total level of electroencephalogram becomes higher in spite of short exposure to visual stimuli in work environment, which shows that the worker becomes stressed. The ${\beta}$ wave electroencephalogram of all materials is drawn in calcarine fissure of occipital lobe to show the convergent distribution, and stronger with block-processed Nano Silver Silk(NSS). The study based on the potential risks of human diseases such as physical fatigue by electromagnetic waves, and has shown that the application of Nano Silver textile for human uses require a proper particle size of it which would not penetrate cellular tissues, and a proper binder and binding treatment for it. However, it is highly required for back-up researches to verify various aspects in applying nano silver to textile products.