• 한국지반환경공학회 논문집
• /
• 제17권2호
• /
• pp.5-11
• /
• 2016

다층벽탄소나노튜브(MWCNT)와 titanium(IV) butoxide(TNB) 그리고 silver nitrate($AgNO_3$)를 이용하여 졸-겔법으로 $MWCNT-TiO_2$ 복합체와 $Ag-MWCNT-TiO_2$ 복합체를 제조하였다. 복합체에서의 Ag의 분산 및 구조를 주사전자현미경(SEM)과 투과전자현미경(FE-TEM)으로 관찰하였다. X선 회절 분석기(XRD)를 이용하여 복합체의 패턴을 보았을 때 anatase 결정구조를 확인할 수 있었다. 에너지 분광 분석기(EDX)로 원소성분을 분석한 결과 주요 원소인 C, Ti, O 그리고 Ag가 확인되었다. $TiO_2$ 입자는 MWCNT에 균일하게 분산되었고, Ag 입자는 튜브 표면에 고정되었다. 또한 UV 조사 시간에 따른 메틸렌블루의 분해를 통하여 광촉매 활성평가를 하였다. $Ag-MWCNT-TiO_2$ 복합체는 $MWCNT-TiO_2$ 복합체보다 높은 광분해능을 보였다. Ag의 높은 전도성이 $MWCNT-TiO_2$ 복합체의 광활성을 향상 시킨다는 결과를 나타냈다.

• 한국표면공학회지
• /
• 제40권1호
• /
• pp.6-10
• /
• 2007

For low-emissivity application on window glass, coalescence of thin film silver islands is crucial for high transmittance in the visible and high reflectance in the infrared. It is well known that the underlayer affects the growth mode. In this work, the effect of the underlayer on the growth of silver films deposited by filtered cathodic vacuum arc is discussed. While a nominal 0.1 nm niobium underlayer has promoted the coalescence of silver islands, a 0.2 nm layer did not show these features. From a thermodynamic approach, Nb seeding less one monolayer is considered to reduce the surface energy between the silver atoms and $Nb/TiO_2$ surface, resulting the change of its growth from 3D islands to 2D-layer modes. If the seed layer exceeds one monolayer, however, a rougher surface is formed because the surface energy of Nb itself is superior to that of $Nb-TiO_2$. The onset of silver layer on the roughened Nb surface is required more silver.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.258-259
• /
• 2014

이산화티타늄($TiO_2$)의 띠 간격 (Band-Gap) 에너지를, 자외선 영역에서 질소와 $Ag-PbMoO_4$를 이용하여 가시광 응답형 광촉매를 제조하기 위하여 실험하였다. 이와 함께 제조한 "$AgPbMoO_4+N-TiO_2$"가 $TiO_2$, $N-TiO_2$, $PbMoO_4$, $AgPbMoO_4$에 비해 에너지 흡수 파장대의 향상을 확인하고 XRD, XPS, FE-SEM, UV-vis-DRS diffuse reflectance spectroscopy 분석을 통해 특성평가 및 분말의 광촉매 활성을 염료의 광촉매 분해반응으로 규명하였다.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1174-1177
• /
• 2004

The dielectric and piezoelectric properties of silver added 0.96 Pb(Z $r_{0.52}$ $Ti_{0.48}$) $O_3$-0.04 Pb(Mn,W,Sb,Nb)$_3$ ceramics were examined. By varying the contents of silver(0.0, 0.4, 1.0 mol%), the effect of silver addition on PZT-PMWSN ceramics was investigated at various sintering temperature(900, 1000, 1100 $^{\circ}C$). As increasing silver contents, the relative dielectric constant was increased and sinterability was enhanced. At the specimen with 0.4 mol% Ag and sintered at 1000 $^{\circ}C$, electromechanical coupling factor( $k_{p}$), mechanical quality factor( $Q_{m}$), dielectric constant($\varepsilon$$_{r}$) and dielectric loss were 0.502, 811, 991, 0.006, respectively. The results showed that the PZT-PMWSN/Ag composites have enhanced piezoelectic and dielectric properties and sintering temperature was lowered.red.

• 대한방사선기술학회지:방사선기술과학
• /
• 제26권1호
• /
• pp.51-62
• /
• 2003

초음파 팬텀의 조직등가물질(TMM)을 합성하기 위하여 폴리우레탄을 주제로 C, CCR, $TiO_2$, tungsten, silver 분말 등의 반사체를 이용하여 폴리우레탄 TMM을 합성하여 다음과 같은 결론을 얻었다. (1) 모든 TMM은 반사체의 경도와 농도가 증가함에 따라 투과도가 균질성이 감소하였으며 (2) C type TMM은 균질성, 투과도, 회새도, 전파속도, 감쇠 등의 음파 특성이 간과 유사한 것으로 나타났고 (3) $TiO_2$ type TMM은 무에코 영역에 점상의 에코가 산재하는 불균질환 양상을 보였고 (4) tungstem type TMM은 간경화와 유사한 불균질한 에코 양상을 보였고 (5) silver type TMM은 대체로 전립선과 유사한 에코 양상의 균질한 양상으로 나타났다. 본 TMM의 개발은 초음파 Q/A 팬텀은 물론 유방, 갑상선, 직장 등의 초음파 훈련용 팬텀(ultrasound previous phantom)의 제작에 기여할 것으로 기대한다.

• 한국세라믹학회지
• /
• 제43권1호
• /
• pp.55-61
• /
• 2006

The microwave dielectric properties and low temperature sintering of $Ca[Ti_{1-x}(Ni_{1/3}Nb_{2/3})_x]O_3$ system were investigated at the sintering temperature $1,200\~1,350^{\circ}C$. The density and quality factors $(Q{\times}f)$ increased while dielectric constants slightly decreased with the decrease of Ti. The dielectric constant, quality factor, and temperature coefficient of resonance frequency $(\tau_f)$ were 64, 17,000 GHz, and $-9.1\;ppm/^{\circ}C$ respectively, when $CaTi_{1/2}(Ni_{1/3}Nb_{2/3})_{1/2}O_3$ ceramics were sintered at $1,300^{\circ}C$ for 4 h. $2Li_2O-B_2O_3$ was added to $CaTi_{1/2}(Ni_{1/3}Nb_{2/3})_{1/2}O_3$ to decrease the sintering temperature for LTCC application. The microwave dielectric properties of the samples sintered at $925^{\circ}C$ for 2 h with the addition of $6\;wt\%\;2Li_2O-B_2O_3$ were $\varepsilon_r=48.7,\;Q{\times}f=8,460\;GHz$, and $\tau_f=+5.6ppm/^{\circ}C$. Compatibility test of the composition with silver electrode shows no reaction with silver electrode, implying the feasibility as a high-K LTCC material.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.225-225
• /
• 2013

Nanostructured noble metals have been attractive for their unusual optical properties and are widely utilized for various purposes. The optical properties mainly originating from collective electron oscillation can assist direct energy conversion via surface plasmon resonances. Here, we investigated the effect of surface plasmons of silver nanowires on the generation of hot electrons. It is reported that the surface plasmons of silver nanowires exhibit longitudinal and transverse modes, depending on the aspect ratio of the nanowires. In order to measure the hot electron flow through the metallic nanowires, chemically modified Au/TiO2 Schottky diodes were employed as the electric contact. The silver nanowires were deposited on a Au metal layer via the spray method to control uniformity and the amount of silver nanowire deposited. We measured the hot electron flow generated by photon absorption on the silver nanowires deposited on the Au/TiO2 Schottky diodes. The incident photon-to-current efficiency was measured a function of the photon energy, revealing two polarization modes of siliver nanowires: transverse and longitudinal modes. UV-Vis spectra exhibited two polarization modes, which are also consistent with the photocurrent measurements. Good correlation between the IPCE and UV-vis measurements suggests that hot electron measurement on nanowires on nanodiodes is a useful way to reveal the intrinsic properties of surface plasmons of nanowires.

• 한국세라믹학회지
• /
• 제23권5호
• /
• pp.55-60
• /
• 1986

A mechanism for formation of surface reoxidation layer in Surface Boundary Layer Capacitor (SBLC) has been studied. SBLC were prepared by reduction of $BaTiO_3$ doped with $Bi_2O_3$ and electrode firing of silver paste containing $Bi_2O_3$ The apparent dielectric constant was in the order of $10^5$ and the insulation resistance larger than $10^6$$\Omega$ It can be expected that $Bi_2O_3$ dopant in $BaTiO_3$ plays the role of inhibition of grain growth and decreasing the resistivity of $BaTiO_3$. In order to confirm the process of surface reoxidation layer effects of atmosphere and annealing time in electrode sintering were investigated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.582-585
• /
• 1999

Electroluminescence is occurred when phosphor is located in electric field. In this paper, we made powder electroluminescent device (PELD) with structured ITO film/Phosphor/Insulator/Silver paste. The transparent electrode was ITO film and green(2704-01) and orange(2702-02) and blue-preen(2703-01) were used as phosphor. The insulator was BaTiO$_3$ and $Y_2$O$_3$, bark electrode was silver paste. To investigate electrical and optical properties of PELDs, EL spectrum, Brightness . Transferred charge density using Sawyer-Towers circuit was measured.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2607-2610
• /
• 2011

Monodispersed Ag/$TiO_2$ core/shell nanoparticles were synthesized in solution via colloid-seeded deposition process using Ag nanoparticles as colloid seeds and $Ti(SO_4)_2$ as Ti-source respectively. Silver nitrate was reduced to Ag nanoparticles with $N_2H_4{\cdot}H_2O$ in the presence of CTAB as stabilizing agent. The titania sols hydrolyzed by the $Ti(SO_4)_2$ solution deposited on the surface of Ag nanoparticles to form the Ag/$TiO_2$ core/shell nanoparticles. Inductively coupled plasma atomic emission spectrometry (ICP-AES) showed low amount of Ag ion leaching from the Ag/$TiO_2$ core/shell nanoparticles. The Ag/$TiO_2$ core/shell nanoparticles indicated excellent antibacterial effects against Escherichia coli and maintained long-term antibacterial property.