• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1068-1078
• /
• 2004

In this paper we investigated the characteristics of surface degradation in silicone rubber due to corona exposure and recovery mechanism. It was shown that surface free energy was 22.42 mJ/$m^2$ on initial sample but surface free energy was approximately increased to 71.14 mJ/$m^2$ after 45 minutes. However, surface free energy on silicone rubber after corona discharge treatment was completely recovered within a short time due to diffusion of low molecular weight(LMW) silicone fluid. It was shown that corona discharge insured the increase of diffusible LMW chains, which could lead to recover the surface hydrophobicity. 200～370 g/mol distribution of LMW silicone fluid which was extracted by solvent-extraction with gel permeation chromatography (GPC) was contributed to recovery. The surface degradation characteristics on silicone rubbers and the recovery mechanism based on our results were discussed.

• 타이어
• /
• 통권18호
• /
• pp.3-10
• /
• 1968

화학공업사발행인 화학공업지 1968년 1월호에 고무에 대한 기본적인 개념과 아울러 현재 가장 댜량으로 사용되고 있는 합성고무들에 관한 성질, 용도 및 배합례를 소개한 일이 있다. 이번에는 특수한 용도에 사용되는 하이팔론(Hypalon, Chlorosulfonated polyethylene), 티오콜(Thiokol, Polysulfide, Polymers), 실리콘고무(Silicone rubbers) 및 비소고무(Fluorocarbon elastomers)에 대하여 기술하고자 한다.

• Elastomers and Composites
• /
• 제31권5호
• /
• pp.335-340
• /
• 1996

In order to look into the internal structure and the properties in the silicone rubbers added reinforcing fillers; silica $additives(O{\sim}140phr)$, and to examine the behavior of charged particles, the properties of thermally stimulated current(TSC) and X-Ray diffraction are investigated, respectively. And then, from the TSC which are formed by applying the electric field of $2{\sim}5kV/mm$ to specimen at the temperature range from -150 to $260^{\circ}C$, the results are as follwing: In the case of non-filled specimen, four peaks of ${\delta},\;{\gamma},\;{\beta}\;and\;{\alpha}$ are obtained at the temperature of $-120^{\circ}C,\;-60^{\circ}C,\;20^{\circ}C\;and\;130^{\circ}C$, respectively and the case of filled specimen, three peaks of ${\delta},\;{\alpha}_2\;and\;{\alpha}_1$ are observed at the temperature of $-120^{\circ}C,\;80^{\circ}C\;and\;130^{\circ}C$, respectively. The origins of these peaks are that, the ${\delta}$ peak seems to the result from the contribution of side chain methyl radical, and the ${\gamma}$ peak from the depolarization of space charge polarization owing to be added impurity during manufacturing specimens, and the ${\beta}$ peak from the orientation of $Si-CH_3$ dipole, and the ${\alpha}_2$ near the temperature of $80^{\circ}C$ from hydroxyl in carboxylic radical, and finally, the ${\alpha}_1$ peak near the temperature of $130^{\circ}C$ from carboxyl acid that is formed by the thermal oxidation of high temperature.

• 한국안전학회지
• /
• 제11권2호
• /
• pp.60-66
• /
• 1996

In order to look into the internal structure and electrical properties of insulating Silicone rubbers added reinforcing fillers ; Silica(0-140 phr ), and to examine the behavior of charged particles, and the properties of thermally stimulated current (TSC) are investigated, respectively. From the TSC which are formed by applying the electric field of 2~5 ㎸/mm to specimen at temperature range from -150 to $270^{\circ}C$, the results arp as following. In the case of non-filled specimen, four peaks of $\delta$, $\gamma$ , $\beta$ and u are obtained at the temperature of $-120^{\circ}C$, $-60^{\circ}C$, $20^{\circ}C$ and $130^{\circ}C$, respectively and the case of filled specimen, three peaks of $\delta$, ${\alpha}_2$ and ${\alpha}_1$ are observed at the temperature of of $-120^{\circ}C$, $80^{\circ}C$ and $130^{\circ}C$, respectively. The origins of these peaks are that, the $\delta$ peak seems to the result from the contribution of side chain methyl radical, and the $\beta$ peak from the depolarization of space charge polarization owing to added imputity during during manufacturing specimens, and the $\beta$ peak from the orientation of $Si-CH_3$dipole, and the ${\alpha}_2$ near the temperature of $130^{\circ}C$ from carboxyl acid that is formed by the thermal oxidation of high temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1276-1278
• /
• 1998

In this paper, aging characteristics of silicone rubber used for outdoor insulation have been investigated with regards to sunlight effect. For this purpose, silicone rubbers were aged under the artificial sunlight by use of xenon arc lamp(1500W) and various tests were performed such as tracking, breakdown, contact angle, stress, strain. And then, in order to elucidate the changes of material, analysis have been followed as follows; FT-IR, SEM and EDS. Regarding the effect of the sunlight, it was obs that the surface of test samples are severely da with decreased hydrophobicity, tracking resistan breakdown strength.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1621-1623
• /
• 1999

Recently, high voltage outdoor ploymer insulators have been widely used commercially owing to their excellent electrical and mechanical properties, superior comtamination flashover performance, light weight, easy installation or handing, no maintenance during service, competitive price and so on. compared to porcelaain and glass insulators. For instance, silicone rubber(SR) for polymeric insulators specially has much superior insulating and anti-pollution performance due to its specific hydrophobicity even in severe contaminated environments. We have investigated surface discharge current characteristics of silicone rubbers(SR) for HV outdoor composite insulation specimen under accelerated aging codition using a computer measuring system. The relations of average leakage current and surface discharge current repetition rates and discharge current amplitude, the distribution of discharge current amplitude were studied to investigate electrical conduction of silicone rubber surface with the salt fog condition.

• Elastomers and Composites
• /
• 제22권1호
• /
• pp.20-28
• /
• 1987

The characteristic of the dielectric relaxation in silicone rubbers were studied in the frequency range of $1{\times}10^2{\sim}3{\times}10^6Hz$ at the temperature range of $30^{\circ}{\sim}170^{\circ}C$. As the results of the study, it has been confirmed that the silicone rubber containing the cross-linking agants of 2,5-bis(tert-butylperoxy)-2, 5-dimethyl hexane exhibit the dissipation spectra of two kind(${\alpha},\;{\beta}$ dissipation) due to the siloxane and methyl groups. Particularly, the maximum value of dielectric loss spectra of silicone rubber combinning the cross-linking agents of 0.7phr to 1.0phr are on the increasing in high frequency region, but the specimen of above 1.0phr become smaller again. The energy and the entropy of activation on the molicular motion obtained 18.32 kcal/mole and $1.48ca1/mole{\cdot}deg$ in measuring condition respectively.

• 한국전기전자재료학회논문지
• /
• 제32권4호
• /
• pp.349-355
• /
• 2019

A fire, be it caused intentionally or unintentionally, leads to economic loss and physical damage, and requires digestion. The number of fires is increasing yearly, and electrical fires account for more than 30% among the main causes of fires. Electric wires that catch fire typically employ silicone coatings; silicone has organic as well as inorganic properties. Silicon is a natural, nonexistent, synthetic product with numerous applications. In this study, a silicon rubber for application in wires was prepared by high-temperature vulcanization (HTV) with a Shore A hardness of 70. We report results for the flame retardancy test and the fire safety characteristics via inorganic analysis. For this, a quartz inorganic material was added to the wire specimen, and 18% powdered extinguishing agent ammonium phosphate and expanded vermiculite respectively. Thus, expanded vermiculite showed the best flame retardancy and fire safety characteristics.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.232-235
• /
• 2002

Recently developed liquid silicone rubber (LSR) can be cured by platinum catalyzed additional hydrosilylation mechanism and has the advantage of no byproduct compared to traditional millable peroxide curing silicone rubber. We investigated the characteristics of dielectric breakdown of silicone rubber and adhesion properties between semi-conductive LSR and insulating LSR for high voltage application of pre-molded joint (PMJ). In order to understand the dielectric breakdown characteristics, we used the sheet samples and the paired type rogowski insert electrode system. The breakdown strength and adhesion strength of LSR (E-3) were superior to those of several silicone rubbers. Adhesion strength could be improved by curing at high temperature without post-curing process or enhanced by post-curing process. When LSR (E-3) was cured at $(150^{\circ}C{\times}10min$ semi-conductive )${\times}$ ($175^{\circ}C{\times}10min$ insulation), it showed the high breakdown strength with low standard deviation, and good adhesion strength. In this results, we could apply this process to the fabrication of PMJ without post-curing.

• 폴리머
• /
• 제35권4호
• /
• pp.342-349
• /
• 2011

실리카의 표면 개질제인 vinyltriethoxysilane(VTEOS)의 함량에 따른 실리카로 보강된 실리콘 고무의 기계적 물성 변화 및 내열성, 내유성, 압축 영구줄음률, 반발탄성 및 가교밀도 변화를 연구하였다. 결과로 VTEOS의 함량이 2.0 phr까지 증가함에 따라 경도는 상승하였으나 인장강도 파단신율, 인열강도가 감소하였다. 내열시험에서는 VTEOS의 함량이 증가될수록 경도변화, 인장강도 변화율, 파단신율 변화율이 크게 감소하였다. VTEOS 2.0 phr에서 가장 우수한 내열특성을 나타내었다. 또한 VTEOS의 함량이 증가될수록 실리콘 고무의 내유성이 증진되었으며, VTEOS 미첨가 시보다 경도 하락폭이 크게 낮았으며, 파란신율 변화율은 약 2배 이상 감소하였다. 반발탄성도 VTEOS의 함량이 증가될수록 우수하였으며, 압축 영구줄음률 역시 VTEOS가 증가될수록 감소하였다. 가교실험 결과 VTEOS가 증가될수록 최대 토크값와 가교밀도가 크게 향상되었다.