• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1231-1239
• /
• 1994

In this study, gel powder which had relatively high hydration reactivity in CaO and P2O5 rich composition of CaO-P2O5-SiO2-H2O system was prepared by sol-gel process and its hydrated specimen was manufactured. The it was investigated to appropriate calcination temperature in sol-gel process which hydrated specimen of gel powder have proven to strength and the effect of factors influenced strength in hydration process. The major product of before and after hydration reaction was hydroxyapatite, and crystalline phase of C-S-H was already formed during gelation process. After hydration reaction of pressed specimen, crystalline phase of C-S-P-H was formed. It was hydrated product of silicocarnotite (5CaO.P2O5.SiO2). Gel phases of C-S-H and C-S-P-H occured as a result of partial substitution of amorphous silica by P2O5 was formed. The strength of hydrated hardened body is developed by strong bonding and bridging between the gel phases of C-S-H or C-S-P-H and the crystalline products such as hydroxyapatite, Ca(OH)2 C-S-H and C-S-P-H. In addition, the ultrafine gel powder have an great effect on increase of hydration reaction.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1557-1561
• /
• 2006

The use of chemically modified silica-salen$(NEt_2)_2$ was studied for the separation and concentration of the metal ions from an aqueous solution by a solid phase extraction. After the salen(NEt2)2 was synthesized, it was chemically bonded to silica gel by a diazonium coupling reaction. The adsorption capacities and binding constants were obtained with respect to Cu(II), Mn(II), Pb(II) and Zn(II) by a graphical method. Some experimental conditions were optimized for the determination of the trace elements. After the silica-salen(NEt2)2 was pulverized in a sample solution of which the pH was adjusted, the solution was stirred to pre-concentrate the metal ions. The metal ions adsorbed were desorbed with nitric acid solution. And the concentrated analytes were determined by a flame AAS. The method proposed here was so rarely influenced by a sample matrix that the procedure was applied to 3 types of water samples. The reproducible results of less than 10% RSD were obtained at the concentration level of ca. 100 ng/mL and the recoveries of 95-109% were obtained in the spiked samples in which given amounts of analytes were added.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.907-911
• /
• 2009

To improve the moisture stability of the $CaS:Eu^{2+}$ red phosphor, surface coatings with silica nanoparticles were performed using five different methods, i.e., $P_1$, $P_2$, $P_3$, $P_4$, and $P_5$. The phosphors were coated with silica nanoparticles using a dip coating method ($P_1$) and sol-gel method ($P_2$). The phosphors were coated using a solution containing silica nanoparticles and poly(1-vinyl-2-pyrrolidone), PVP, $(P_3$). The phosphors were also coated with silica nanoparticles by reacting with the 1-vinyl-2-pyrrolidone (VP) monomer ($P_4$) or by reacting with mixtures containing VP and tetraethylorthosilicate ($P_5$). A decrease in the photoluminescence (PL) intensity was observed regardless of the coating methods. However, the moisture stability of the phosphors was enhanced by the coating when aged in a temperature-controlled humidity chamber. Among these methods, the $P_4$ (or $P_5$) method exhibited the greatest increase in moisture stability of the phosphors. The coated phosphors showed a relatively constant intensity with aging time, whereas the uncoated phosphor showed a decrease.

• KSBB Journal
• /
• 제14권5호
• /
• pp.539-542
• /
• 1999

의 대량생산과 분리.정제 기술의 개발을 위해 Arthrobacter ureafaciens KCTC 3387 균주를 이용한 발효 및 분리정제된 효소반응을 통한 DFAIII의 생산과 회수에 대하여 조사하였다. 첫 번째 방법으로는 Arthrobacter ureafaciens 균주를 발효배양하여 DFAIII 양이 최고가 되는 시점에서 발효정지 시킨후 silica gel를 통해 gel filtration을 분리하였고, 두 번째 방법으로는 정제된 효소로 반응시킨 다음 silica gel을 통해 gel filtration을 하여 분리하였으며, 세 번째 방법으로는 발효배양상등액에 에탄올을 첨가하여 생산물을 침전시켜 DFAIII를 분리하였다. 25 g/L의 초기 inulin 농도로부터 각각 1.57, 4.40, 0.34 g/L 의 정제분말이 얻어져 각각 6.3, 17.6, 1.4%의 수율로 회수되었고, 81, 97, 87%의 순도를 각각 나타내었다. 효소반응을 통한 DFAIII 생산 및 회수가 가장 높은 수율과 순도로 회수되었으며, 발효배양을 통한 DFAIII의 생산은 초기기질농도 25 g/L의 50%에 해당하는 DFAIII가 생산되었으나 효소반응에 의한 생산보다는 낮은 수율로 회수되었고 순도는 세 가지 방법 중 가장 낮았으며, 에탄올 침전반응은 가장 낮은 수율을 나타내었다.

• 멤브레인
• /
• 제18권2호
• /
• pp.176-184
• /
• 2008

본 연구에서 졸-겔 방법에 의하여 나노 기공을 가지는 세라믹막을 제조하여 단일 조성의 헬륨과 질소를 가지고 기체투과 실험을 수행하였다. 기공 크기 $0.1{\mu}m$, 기공율 32%의 평막형 ${\alpha}-Al_2O_3$ 지지체를 제조하였으며, 지지체를 담지하여 코팅하는 방법으로 4nm의 기공 크기를 가지는 ${\gamma}-Al_2O_3$ 중간층을 제조하였다. 실리카 졸은 TEOS의 산 촉매 가수분해와 축중합반응을 통하여 합성하였다. 막은 딥코팅과 소결과정을 거쳐 제조되었다. 졸-겔 법에 의해 합성된 세라믹 막을 통한 헬륨, 질소 투과 실험은 기체의 투과 특성을 파악하기 위하여 시행하였다. 질소에 대한 헬륨의 선택도는 $100{\sim}160$ 정도였으며 헬륨의 투과도는 $303{\sim}363K$의 온도 범위에서 $10^{-7}mol/m^2{\cdot}s{\cdot}Pa$ 정도였다.

• 한국건설순환자원학회논문집
• /
• 제10권4호
• /
• pp.523-530
• /
• 2022

해수의 흐름이 존재하는 방조제 제체 보강공사 시 가장 큰 문제는 재료의 유출로, 콘크리트의 중력식 타설은 원활히 공극을 채우기 어렵고 굳지 않은 콘크리트의 시멘트는 해수에 분산될 확률이 높기 때문에 경화 후 품질의 신뢰성이 저하될 뿐만 아니라, 인근 환경에 악역향을 끼칠 수 있다. 이에 주입이 가능한 겔형태의 주입재가 필요하다, 본 연구에서는 급결성을 띠는 전기로환원슬래그 및 고로슬래그를 활용하여 초기 강도와 해수 침지에 따른 내구성 향상 효과를 평가하였다, 실험 결과 실리카계 약액과의 반응을 통해 흐름성을 갖는 겔형태의 주입재 제조가 가능하였으며 겔의 흐름성은 배합에 따라 105~143 mm 수준으로 현장모사 시험을 통해 외부 유출 없이 공극을 채울 수 있어 현장 적용성을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제29권8호
• /
• pp.1630-1632
• /
• 2008

• 한국세라믹학회지
• /
• 제26권5호
• /
• pp.682-690
• /
• 1989

Fine mullite powder was prepared by colloidal sol-gel route. Boehmite as a starting material of Al2O3 and silica sol or fumed silica as a starting material of SiO2 were used. $\alpha$-Al2O3, TiO2 and ZrO2 were used as seeding materials. The combination of boehmite and silica was found to be the stoichiometric mullite powder. Techniques for drying used were spray drying, freeze drying, reduced pressure evaporation and drying in a oven. The gelled powder was heated at 130$0^{\circ}C$ for 100min and was attrition-milled for 1~3hrs. The mullite powder obtained was composed of submicrometer, uniform and spherical particles with a narrow size distribution. The mullite powder was characterized by BET, SEM, XRD and IR spectroscopy.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.379-384
• /
• 2002

The deterioration of concrete due to sulfate ions in various sulfate environments such as groundwater, soil and seawater is one of important factors degrading the durability of concrete structure. The aim of this paper is to evaluate on the magnesium sulfate alttack resistance of mortars with silica fume. In this study, compressive strength loss and length change of prismatic mortars, containing silica fume, immersed in 5% magnesium sulfate solution for 270 days were investigated. Additionally, paste powders with same binder were used to observe reactants of cement matrices through the instrumental analysis such as XRD, SEM and MIP. Results obtained from this study indicate that the greater damaging effects of the magnesium soulution are due to the decomposition of the C-S-H gel to M-C-S-H.

• 한국세라믹학회지
• /
• 제33권5호
• /
• pp.485-494
• /
• 1996

Silica Aerogels with the density and porosity of 0.1g/cm3 and 96% were synthesized by two different supercri-tical drying processes (i.e additional solvent and intial pressure methods) Isoptopanol was chosen as sol-gel and supercritical drying solvents in order to synthesize aerogels at the lower temperature and pressure because the critical values of isopropanol are lower than those of methanol and ethanol commonly used. The P-V-T relationship of isopropanol was experimentally described for optimizing supercritical drying conditions such as the amount of extra solvent and supercritical drying temperature and pressure. In the addional solvent method monolithic and transparent aerogels were obtained by supercritical drying at 25$0^{\circ}C$ and 900 psing after 40% of the reactor volume was filled with isopropanol. Crack-free aerogels were synthesized at 25$0^{\circ}C$ and 1100~1200 psig by the initial pressure method with an intial nitrogen gas pressure of 400 psig and the isopropanol amount of 5% of the reactor volume.