• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3274-3280
• /
• 2011

Monodispersed porous NiO and $Co_3O_4$ microcapsules with a hollow core were synthesized using SBA-16 silica sol and PS as a hard template. The porous hollow microcapsules were characterized by XRD, TEM and $N_2$ adsorption/desorption analysis. After $H_2$ reduction of metal oxide microspheres, they were conducted as an active catalyst in the reduction of chiral butylronitrile and cyanobenzene. The mesoporous metals having a hollow structure showed a higher activity than a nonporous metal powder and an impregnated metal on the carbon support.

• 한국수소및신에너지학회논문집
• /
• 제18권3호
• /
• pp.317-324
• /
• 2007

The conversion reaction of ortho to para hydrogen was studied. The percentage of ortho and para hydrogen is mainly dependent on the equilibrium temperature. Because this reaction is known to be accelerated by the catalyst such as nickel-silicate and ruthenium on silica, we focused in the test and development of the catalysts. We studied metal-silicates because they provide high metal dispersion on support. Nickel-silicate, ruthenium-silicate and mixed-silicate were prepared by the coprecipitation method and used in the reaction at the temperature of liquid nitrogen. The conversion was measured by the difference of thermal conductivity between reference gas and sample gas. The activation condition was important and it affected the activities of the catalysts. Nickel-silicate showed high activities. Ruthenium-silicate also showed relative high activities but mixed-silicate showed poor activities.

• The Journal of Advanced Prosthodontics
• /
• 제6권1호
• /
• pp.60-65
• /
• 2014

Teeth that have short clinical crown, which are not alone enough to support the definitive restoration can be best treated using the post and core system. The advantages of fiber post over conventional metallic post materials have led to its wide acceptance. In addition to that the combination of aesthetic and mechanical benefits of fiber post has provided it with a rise in the field of dentistry. Also the results obtained from some clinical trials have encouraged the clinicians to use the fiber posts confidently. Fiber posts are manufactured from pre-stretched fibers impregnated within a resin matrix. The fibers could that be of carbon, glass/silica, and quartz, whereas Epoxy and bis-GMA are the most widely used resin bases. But recently studies are also found to be going on for polyimide as possible material for the fiber post resin base as a substitute for the conventional materials.

• Environmental Engineering Research
• /
• 제7권4호
• /
• pp.227-237
• /
• 2002

Chemical vapor deposition (CVD), ion beam sputtering (IBS) and sol-gel method were used to prepare TiO$_2$ thin films for degradation of hazardous organic compounds exemplified by 2-chlorophenol (2-CP). The influence of supporting materials and coating methods on the photocatalytic activity of the TiO$_2$ thin films were also studied. TiO$_2$ thin films were coated onto various supporting materials including steel cloth (SS), copper cloth, quartz glass tube (QGT), and silica gel (SG). Results indicate that SS (37 μm)- TiO$_2$ thin film prepared by IBS method improves the photodegradation of 2-CP. Among all supporting materials studied, SS(37 μm) is found to be the best support.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.107-112
• /
• 1991

The object of this study is to investigate material characteristics and flexural behavior of high strength concrete. Principal causes of variations of high compressive strength include the strength-producing capabilities of cement and silica hume. Compressive strength of 1200 kgf/$\textrm{cm}^2$ is introduced for identifying the effect of the variation of the size of porocity and alternative method of measurement, Acoustic Emition method, is applied to examine the phenominon of concrete failure. The main test variables in the beam element are tensile steel ratios, presence of shear reinforcement, and change of steel shape. The estimation of stress block in the flexural test of this element tends to support the present theory and may suggest a desirable shape of the stress block.

• Bulletin of the Korean Chemical Society
• /
• 제22권11호
• /
• pp.1183-1191
• /
• 2001

The metallorganic chemical vapor deposition (MOCVD) method has been used to prepare TiO2 thin films for the degradation of hazardous organic compounds, such as 2-chlorophenol (2-CP). The effect of supporting materials and metal doping on the photocatalytic activity of TiO2 thin films also has been studied. TiO2 thin films were coated onto various supporting materials, including stainless steel cloth(SS), quartz glass tube (QGT), and silica gel (SG). Transition metals, such as Pd(II), Pt(IV), Nd(III) and Fe(III), were doped onto TiO2 thin film. The results indicate that Nd(Ⅲ) doping improves the photodegradation of 2-CP. Among all supporting materials studied, SS(37 ${\mu}m)$ appears to be the best support. An optimal amount of doping material at 1.0 percent (w/w) of TiO2-substrate thin film gives the best photodegration of 2-CP.

• 대한화학회지
• /
• 제32권6호
• /
• pp.543-548
• /
• 1988

1∼5wt%의 구리가 얹혀진 ${\gamma}$-알루미나 또는 티타니아에서 금속-지지체 상호작용을 승온환원과 상자성 공명으로 연구하였다. $500^{\circ}C에서 시료를 산소로 처리했을 때 티타니아계에서는 구리 함량이 증가함에 따라 고온쪽으로 승온환원 피이크가 증가했으나 알루미나 계에서는 저온쪽의 승온 환원 피이크가 커졌다. $300^{\circ}C 처리 경우에는 알루미나계에서는 $300^{\circ}C에서 티타니아계는 120 과 $300^{\circ}C에서 각각 환원피이크를 보여주었다. ${\gamma}$-알루미나에서는 $Cu^{2+}$의 전형적인 상자성 신호가 나타났으나 티타니아에서는 넓고 작은 신호만 관찰되었다. 이들 결과들로부터 금속-지지체 상호작용은 실리카 < 티타니아 < ${\gamma}$-알루미나의 순으로 커지며 산화구리는 지지체에 따라 서로 다른 담지특성을 가짐을 알 수 있었다.

• 청정기술
• /
• 제19권1호
• /
• pp.65-72
• /
• 2013

본 연구에서는 중형 기공성 실리카 담체인 MCM-41과 SBA-15를 활용하여 팔라듐과 구리를 담지한 후, 제조 촉매의 수중 질산성 질소 저감 반응 활성을 평가하였다. 순수 수소 공급 반응 조건에서, 질산성 질소의 농도는 반응 시간에 따라 점차 저감되었지만, 반응기 내부에 높게 형성된 pH로 인해 질소의 선택도가 매우 낮은 문제점이 발견되었다. 이를 해결하기 위해 이산화탄소를 수소와 함께 공급하여 pH의 안정화를 도모하였고, 질소 선택도를 40% 가량 증가시켰다. 상기 두 반응 조건에서 모두 Pd-Cu/MCM-41가 Pd-Cu/SBA-15보다 높은 활성을 나타냈다. 이와 같이 수중 질산성 질소 저감 반응의 활성에 차이를 보이는 두 촉매에 대하여, 질소 흡-탈착, XRD, $H_2$-TPR, XPS 등과 같은 특성 분석을 수행하여 제조 촉매의 구조와 물성이 반응활성에 미치는 영향을 검토해보았다.

• Journal of Radiation Protection and Research
• /
• 제29권1호
• /
• pp.1-8
• /
• 2004

ANL에서 개발한 유 무기 복합의 신이온교환수지인 Diphosil은 silica 물질에 diphosphonic acid 그룹을 결합시킨 구조를 가지고 있다. Diphosil을 원전 운영 중 발생되는 방사성폐액 처리에 적용하기 위해 주대상 핵종인 $^{137}Cs,\;^{60}Co$을 사용하여 흡착 평형과 컬럼 실험을 수행하였다. 흡착 평형 실험을 통하여 $^{137}Cs$과 $^{60}Co$의 제거율과 그 제거율에 미치는 다양한 조건에서 비방사성 이온의 영향을 조사하였다. 대상 핵종에 대한 파과곡선은 모의 방사성 폐액을 이용한 실험실 수준의 컬럼 실험을 통해 구하였고, Diphosil의 제거능력을 현재 원전에서 쓰이고 있는 Amberlite IRN 77 수지와 비교하였다.

• Journal of Ecology and Environment
• /
• 제41권1호
• /
• pp.9-18
• /
• 2017

Background: Species in the heterokont genus Synura are colonial and have silica scales whose ultrastructural characteristics are used for classification. We examined the ultrastructure of silica scales and molecular data (nuclear SSU rDNA and LSU rDNA, and plastid rbcL sequences) to better understand the taxonomy and phylogeny within the section Petersenianae of genus Synura. In addition, we report the first finding of newly recorded Synura species from Korea. Results: We identified all species by examination of scale ultrastructure using scanning and transmission electron microscopy (SEM and TEM). Three newly recorded species from Korea, Synura americana, Synura conopea, and Synura truttae were described based on morphological characters, such as cell size, scale shape, scale size, keel shape, number of struts, distance between struts, degree of interconnections between struts, size of base plate pores, keel pores, base plate hole, and posterior rim. The scales of the newly recorded species, which belong to the section Petersenianae, have a well-developed keel and a characteristic number of struts on the base plate. We performed molecular phylogenetic analyses based on sequence data from three genes in 32 strains (including three outgroup species). The results provided strong statistical support that the section Petersenianae was monophyletic, and that all taxa within this section had well-developed keels and a defined number of struts on the base plate. Conclusions: The phylogenetic tree based on sequence data of three genes was congruent with the data on scale ultrastructure. The resulting phylogenetic tree strongly supported the existence of the section Petersenianae. In addition, we propose newly recorded Synura species from Korea based on phylogenetic analyses and morphological characters: S. americana, S. conopea, and S. truttae.