• Elastomers and Composites
• /
• 제39권1호
• /
• pp.51-60
• /
• 2004

본 연구에서는 organoclay를 혼합한 NR/BR blend의 가황특성, 동적점탄성 및 기계적 물성을 carbon black 및 silica를 함유한 배합고무와 비교 평가하였다. Solution 혼합법을 이용함으로써 광범위한 나노 복합체를 제조할 수 있었으며, 충전제의 함량은 10phr로 고정하였다. XRD 실험으로 clay의 삽입 및 박리정도를 측정하였다. 통상적인 혼합법을 이용할 경우 clay의 박리 또는 삽입정도가 미약한 반면 solution 혼합법을 이용할 경우 광범위한 박리형태의 clay 배합고무를 얻을 수 있음을 확인하였다. Clay 배합고무는 carbon black 및 silica를 함유한 배합고무에 비해 높은 tan ${\delta}$값을 나타내며, solution 혼합법을 이용할 경우 통상적인 혼합법에 의해 제조된 clay 배합고무에 비해 우수한 기계적 물성을 가짐을 확인할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.99-99
• /
• 2010

Polymer nanocomposite has been attracting much attention as a new insulation material, since homogeneous dispersion of nm-sized inorganic fillers can improve various properties significantly. In this paper, various kinds of epoxy based nanocomposites were made and AC breakdown strength of Nano-TiO2 and micro-silica filler mixture of epoxy based composites were studied by sphere to sphere electrode. Moreover, nano- and micro-filler combinations were adopted as an approach toward practical application of nanocomposite insulation materials. Nano-TiO2 particle size is about 10nm and composites ratio was resin (100) : hardener (82) : accelerator (1.5). AC breakdown test was performed at room temperature (25 [$^{\circ}C$], 80 [$^{\circ}C$] and 100 [$^{\circ}C$] in the vicinity of Tg (90[$^{\circ}C$]). And thermal conductivity were measured by ASTM-D5470.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.509-510
• /
• 2007

The Breakdown properties of epoxy composites are used for transformers and sensor, which has been studied. As a result, From the measurements of breakdown voltage, the more hardener is increased the stronger breakdown strength at low temperature because the ester of hardener is increased. Breakdown strength at the high temperature is decreased because the temperature at $110^{\circ}C$ is near at $T_g$. When the filler is added, between epoxy and silica is formed interface. Therefore the charge is accumulated in it, and the electric field is concentrated, and breakdown strength is decreased than non-filled specimens. In the case of specimens, the treated with silane, the breakdown strength becomes much higher since this is suggested that silane coupling agent has been improved chemical bonding in the interfaces and has been relaxed the electric filed concentration.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.197-198
• /
• 2023

This study was conducted as part of research and development of high-strength grout. Accordingly, dolomite aggregate was used as a filler incorporated into the high-strength grout. Dolomite aggregate has a disadvantage of increasing the viscosity of the grout due to higher generation of fine powder than other aggregates. Accordingly, in this experiment, it was confirmed that the viscosity, flow time, and flow of high-strength grout change according to the volume composition ratio of dolomite aggregate and cement-based material. All experiments were conducted based on the Korean Industrial Standard KS F 4044, and the mixing factor was applied according to the composition ratio of the binder and the filler. In the experiment, the amount of fine powder contained in the dolomite aggregate rather than the silica sand used in the past is grasped, and after mixing with the grout accordingly, the mixture is proceeded to measure the viscosity in an unhardened state. In addition, the flow and flow time of the grout are evaluated according to the viscosity. As a result of the experiment, it was confirmed that the viscosity and flow time decreased and the flow increased as the volume composition ratio of the dolomite aggregate to the cement-based material increased.

• 공업화학
• /
• 제16권3호
• /
• pp.317-322
• /
• 2005

오늘날 대규모 건설사업에 따른 골재의 고갈과 환경보호 측면에서 폐콘크리트 골재의 재활용이 절실히 요구되고 있다. 본 연구에서는 페콘크리트의 분쇄공정에서 발생되는 페콘크리트 미분말을 폴리머 모르타르의 충전재 대용으로 재활용하고자 하였다. 폴리머 모르타르의 공시체는 폴리머 결합재의 첨가율을 9~15 wt%, 실리카 미분말 충전재 대용의 폐콘크리트 미분말 치환율을 0~20 wt%, 0.1~0.3 mm 잔골재(21~24 wt%)와 0.7~1.2 mm 잔골재(44~47 wt%)의 첨가율을 65~71 wt% 범위로 다양하게 변화시켜 제조하였다. 폴리머 모르타르의 물성을 평가하기 위하여 압축 및 휨강도, 흡수율, 내열수성, 내산성, 세공분포특성, 전자현미경에 의한 미세조직 관찰시험을 행하였다. 시험결과, 폴리머 모르타르의 물성은 폴리머 결합재의 첨가율 증가에 따라 현저히 증가되었으나 페콘크리트 미분말의 치환율 증가에 따라서는 크게 저하되었다.

• 폴리머
• /
• 제29권1호
• /
• pp.102-105
• /
• 2005

다양한 치아 수복이 가능한 광중합형의 치아수복용 고분자 나노복합체(polymeric dental restorative nanocomposites, PDRNC)를 제조하고 이들의 심미적 물성을 고찰하였다. PDRNC 제조에 사용한 충전제는 평균 입경이 1${\mu}m$인 바륨실리케이트와 40 nm 및 7 nm 크기의 나노실리카를 혼성화시켜 사용하였는데 bisphenol A glycerolate methacrylate와 triethyleneglycol dimethacrylate (60/40 wt%)으로 구성되는 기재와의 혼화성 증가를 위해 실란으로 표면을 소수성으로 처리하였다. 가시광선을 이용한 PDRNC의 광중합에 필요한 광개시제는 camphorquinone을, 광증감제는 2-(dimethylamino)ethyl methacrylate을 사용하였다. 제조된 PDRNC의 심미적 물성을 Hunter L, a, b 값으로 평가한 결과, 7nm 크기의 나노 충전제가 첨가될수록 PDRNC의 투명성이 증가되어 심미적 특성이 향상됨을 알 수 있었다.

• Elastomers and Composites
• /
• 제41권4호
• /
• pp.260-267
• /
• 2006

유기화 클레이(organically modified layered silicates)가 보강된 SBR 나노 복합체를 라텍스법(latex method)에 의해서 제조하였다. 유기화 MMT는 dodecylamine으로 유기화한 DA-MMT와 dimethyldodecylamine으로 유기화한 DDA-MMT의 두 가지를 제조하였다. 유기화 클레이의 층간거리와 분산도를 확인하기 위하여 XRD와 TEM촬영을 하였다 Na-MMT, DA-MMT, DDA-MMT의 XRD 회절 패턴을 분석한 결과 Na-MMT는 $2{\theta}=7.2^{\circ}$로써 층간거리가 $12.3{\AA}$, DA-MMT는 $2{\theta}=5.1^{\circ}$로 층간거리가 $17{\AA}$를 나타내었으며, DDA-MMT의 경우, 회절 피크는 $2{\theta}=4.8^{\circ}$로써. 층간거리는 $18.4{\AA}$으로 나타났다. 이는 DDA-MMT와 DA-MMT가 각각 5 phr 첨가된 SBR 나노 복합체의 TEM 결과에서도 확인할 수 있었다. SBR 나노 복합체에 filler system (carbon black/silica/OLS)을 적용 후 시편을 제조하였다. 제조된 시편의 동적 점탄성 평가 (DMTA)는 $-20^{\circ}C{\sim}80^{\circ}C$ 사이에서 이루어졌으며, loss factor (tan $\delta$)의 거동을 확인하였다. 그 결과, 타이어 트래드용 컴파운드를 대상으로 할 경우, 카본블랙과 실리카의 혼용비가 35:25일 때, 빗길 제동특성과 연비특성을 대변하는 $0^{\circ}C$와 $50{\sim}60^{\circ}C$에서의 tan $\delta$가 가장 우수함을 알 수 있었다. 또한 이 시스템에 실리카의 일정 부분을 DDA-MMT($0{\sim}10phr$)로 대체할 경우, $0^{\circ}C$의 tan $\delta$값은 높아지는 반면, $50{\sim}60^{\circ}C$의 tan $\delta$값은 감소하였다.

• Computers and Concrete
• /
• 제10권6호
• /
• pp.649-662
• /
• 2012

This paper presents the results of an investigation on the compressive strength and weight loss of mortars containing three types of fillers as cement replacements; Limestone Filler (LF), Silica Fume (SF) and Trass (TR), subjected to elevated temperatures including $400^{\circ}C$, $600^{\circ}C$, $800^{\circ}C$ and $1000^{\circ}C$. Results indicate that addition of TR to blended cements, compared to SF addition, leads to higher compressive strength and lower weight loss at elevated temperatures. In order to model the influence of the different parameters on the compressive strength and the weight loss of specimens, artificial neural networks (ANNs) were adopted. Different diagrams were plotted based on the predictions of the most accurate networks to study the effects of temperature, different fillers and cement content on the target properties. In addition to the impressive RMSE and $R^2$ values of the best networks, the data used as the input for the prediction plots were chosen within the range of the data introduced to the networks in the training phase. Therefore, the prediction plots could be considered reliable to perform the parametric study.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.705-710
• /
• 2001

So for the quartz-glassy crucible wastes which was used for pulling up silicon-single-crystal ingot have simply reused for refractory raw-materials, or exhausted. This study is concerned on the advanced recycling-technology that is obtained by the proper micro-particle preparation process in order to fabricate fine amorphous silica filler for EMC (Epoxy Molding Compound). Therefore, this paper will deal with the physical, chemical and thermal pre-treatment process for efficient impurity removal and with the proper micro-particle process for producing the amorphous silicafiller. In view of the results, if the chemical, physical and thermal pre-treatment process for efficient elimination of impurity was passed, the purity of wasted fused glassy crucible is almost equal to the its of first anhydrous quartz glass. Thus, it was understood that this wasted fused glassy crucible was sufficient value of recycling, though it was damaged. When the ingot was fabricated, Phase transformation of crystallization by heat treatment (heat hysteresis phenomenon) was not changed. So, it was understood that as fused silica in the amorphous state, as It is, recycling possibility was very high

• Advances in concrete construction
• /
• 제1권4호
• /
• pp.273-288
• /
• 2013

The main objective of this research was to evaluate the potentials of self-compacting concrete (SCC) mixes to develop bond strength. The investigated mixes incorporated relatively high contents of dolomite powder replacing Portland cement. Either silica fume or fly ash was used along with the dolomite powder in some mixes. Seven mixes were proportioned and cast without vibration in long beams with 10 mm and 16 mm steel dowels fixed vertically along the flowing path. The beams were then broken into discrete test specimens. A push-put configuration was adopted for conducting the bond test. The variation of the ultimate bond strength along the flowing path for the different mixes was evaluated. The steel-concrete bond adequacy was evaluated based on normalized bond strength. The results showed that the bond strength was reduced due to Portland cement replacement with dolomite powder. The addition of either silica fume or fly ash positively hindered further degradation as the dolomite powder content increased. However, all SCC mixes containing up to 30% dolomite powder still yielded bond strengths that were adequate for design purpose. The test results demonstrated inconsistent normalized bond strength in the case of the larger diameter compared to the smaller one.