• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.693-698
• /
• 2012

In this study aluminum isopropyl oxide ($Al(O-i-Pr)_3$) was supported on the amine-functionalized surface of silica to synthesize high molecular weight (MW) polylactide (PLA), and it was tested for PLA polymerization behaviors. A silica was funtionalized with silane compound having amine groups, then in-situ treated with $Al(O-i-Pr)_3$. $Al(O-i-Pr)_3$ attached to amine group on silica showed activity only in the presence of MAO (methyl aluminoxane). At the polymerization temperature of $115^{\circ}C$, the conversion and the MW of PLA were increased as the amount of silane was increased. At the polymerization temperature of $130^{\circ}C$, the conversion was decreased while the MW was increased drastically and reached to MW 44000 g/mol when the amine concentration was 3.0 mmol/g. A bimodal type GPC curve was shown at the polymerization temperature of $115^{\circ}C$. As the amount of amine group increased, the peaks of GPC curve were merged. At the polymerization of $130^{\circ}C$, a unimodal GPC curve was shown. $Al(O-i-Pr)_3$ supported on amine-functionalized silica was able to produce higher MW PLA with enhanced activity compared to homogeneous $Al(O-i-Pr)_3$.

• Elastomers and Composites
• /
• v.46 no.1
• /
• pp.45-53
• /
• 2011

The effect of the silane coupling agent, bis(triethoxysilypropyl)tetrasulfide (TESPT), on mechanical properties of a silica-filled NBR compound for oilseal was investigated. Curing behavior and crosslinking density of the compounds were measured using ODR (oscillating disk rheometer) and swelling ratio in toluene. UTM (universal testing machine) and shore A hardness tester were used in order to study the characteristics of mechanical properties of original vulcanizates and aged ones with heated air and ASTM No. 3. oil. Recovery of elasticity which influences the performance and service life of oilseal was investigated by giving bending deformation to vulcanizates in aging condition. After bending aging test, recovery distance was measured and calculated angle of recovery from it. TR (temperature retraction) test was performed on these vulcanizates to determine the low temperature recovery behavior. Wear resistance was measured by Taber type abrasion tester. In addition, SEM was used to characterize the morphology of the worn surface of vulcanizates. The result showed that addition of TESPT into silica-filled compound improves not only compound flow-ability, interaction between NBR and silica and crosslinking density, but also hardness, 100% modulus, recovery of elasticity, wear resistance, heat resistance and ASTM No.3 oil resistance of vulcanizates.

• Corrosion Science and Technology
• /
• v.18 no.6
• /
• pp.232-242
• /
• 2019

In this study, hydrophobically modified fumed silica was added to the PVDF coating to improve corrosion protection performance. Two types of silane modifiers, trimethylchlorosilane (TMCS) and hexamethyldisilazane (HMDZ), were used for hydrophobic modification of the fumed silica. The composition of modified fumed silica was analyzed by Fourier transform infrared, X-ray photoelectron spectroscopy, and elemental analysis. The dispersion of modified fumed silica in the PVDF coating was observed by the transmission electron microscopy, and the hydrophobicity of PVDF coating was analyzed by the water contact angle. Surface properties were examined by the field emission scanning electron microscopy and scanning probe microscopy. Potentiodynamic polarization was conducted to confirm corrosion protection performance of PVDF coating in terms of hydrophobically-modified fumed silica contents. As a result, the average surface roughness and the water contact angle of the PVDF coating increased with modifier contents. The results of the potentiodynamic polarization test showed an increase of the E_corr values with increase of the hydrophobicity of PVDF coating. Thus, it clearly indicates that the corrosion protection performance of PVDF coating improved with the addition of the hydrophobic-modified fumed silica that prevents the penetration of moisture into the PVDF coating.

• Elastomers and Composites
• /
• v.51 no.2
• /
• pp.128-137
• /
• 2016

The effect of the surface area of silicas on their reinforcing performance to styrene-butadiene rubber (SBR) compounds was systematically investigated. The feasibility of the Brunauer-Emmett-Teller surface area ($S_{BET}$) as a parameter representing the characteristics of the silicas was discussed compared to the mesopore volume, c value, oil absorption, and uptake of silane. The increase in $S_{BET}$ of silicas caused a considerable increase in Mooney viscosity, minimum torque, and hysteresis loss of the silica-filled SBR compounds, while significantly enhancing their abrasion property. These changes were explained by the attrition between the hydrophilic silica surface and the hydrophobic rubber chains. As expected, the change in $S_{BET}$ did not induce any remarkable changes in the cure, processing, tensile, and dynamic properties of the silica-filled SBR compounds because the crosslinking density of the rubber chains mainly determined these properties.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.242-247
• /
• 2005

Two kinds of colloidal silica(CS)/silane sol solutions were prepared in variation with synthesizing parameters such as kinds of CS, ratio of CS to silane and reaction time. Such sol solutions were obtained from 1034A Cs/methyl-trimethoxysilane(MTMS) and HSA CS/MTMS solutions. In the case of 1034A CS/MTMS CS/silane sol, coating film had high contact angle and more enhanced flat surface than those in the case of HSA CS/MTMS sol. In the case of thermal stability, thermal dissociation of 1034A CS/MTMS sol did not occur up to $550^{circ}$. The thickness of coating film obtained from 1034A CS/MTMS sol increased with increasing the amount of MTMS. The hardness of coating films obtained from 1034A CS/MTMS sol decreased with increasing the amount of MTMS. Surface free energy of CS/silane sol-gel coating film decreased with increasing amount of MTMS.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.371-378
• /
• 2012

Hydrophilic silica nanoparticles (SNPs) were treated by using 3-glycidoxypropyltrimethoxy silane (GPTMS) and then they were blended with polyurethane-urea (PUU) emulsions to obtain SNPs/PUU nanocomposite films. Thermo-mechanical properties of the nanocomposite films were investigated by varying the grafted amount of GPTMS onto SNPs and the contents of SNPs in the PUU matrix. The thermo-mechanical properties of the nanocomposite films were also compared in terms of the dispersibility of SNPs in the PUU matrix and thermal curing of the GPTMS-grafted SNPs. The maximum amount of grafted GPTMS was $1.99{\times}10^{-6}\;mol/m^2$, and which covered ca. 53% of the total SNP surface area. $^{29}Si$ CP/MAS NMR analyses with the deconvolution of peaks revealed the details of polycondensation degree and patterns of GPTMS in the surface modification of SNPs. The surface modification did not significantly affect colloidal stability of the SNPs in aqueous medium; however, the hydrophobic modification of SNPs offered a favorable effect on the dispersibility of SNPs in the PUU matrix as well as better thermal stability. XRD patterns revealed that GPTMS-grafted SNPs broadened the reduced the characteristic peak of polyol in PUU matrix. The composite films became rigid and less flexible as the SNP content increased from 5 wt.% to 20 wt.%. Particularly, Young's modulus and tensile modulus significantly increased after the thermal curing reaction of the epoxy groups in the SNPs.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.163-170
• /
• 2016

In order to improve the hydrophilic property of polymer films, coating solutions which showed a good hydrophilic property, were prepared by the sol-gel method. The coating solutions were prepared by adding different types of silane coupling agents (aminosilane, epoxysilane and acrylsilane) to a colloidal silica (15 nm diameter). The solutions prepared by adding aminosilane resulted in gels which could not be used as coating solutions. On the other hand, the coating solutions prepared by the addition of epoxysilane showed contact angles of $10{\sim}15^{\circ}$ and good hydrophilic property at R=0.10~0.15 (R=silane coupling agent/colloidal silica weight ratio). In addition, the coating solutions prepared by the addition of acrylsilane at R=0.03~0.07, exhibited contact angles of $5{\sim}10^{\circ}$, which means better hydrophilic property than aminosilane or epoxysilane.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.214-215
• /
• 2006

Colloidal Silica(CS)와 유기수지를 혼합하여 서로의 단점을 보완하는 나노복합재료를 합성하기 위해 친수성인 CS를 유기실란으로 표면처리하여 소수성화하고 유기수지와 복합체를 제조하였다. CS표면의 -OH기와 실란의 -OH기가 축합반응하여 화학결합을 형성함으로서 CS의 표면은 실란의 $CH_3$에 의해 소수성화되어 CS sol이 제조된다. CS sol과 유기수지는 공동용매에 의해 균일한 분산이 가능하고 필름 및 코팅제로의 제조가 가능하다. 사용된 무기물은 40nm 의 크기를 가지므로 가시광선영역의 빛을 산란하지 않아 투명하고 사용된 수지 또한 투명하여 우수한 광학적 특성을 나타낸다. 만들어진 필름은 CS의 영향으로 유기수지의 내열성보다 향상된 열분해온도와 높은 접촉각, 높은 절연율을 보였다.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.1
• /
• pp.22-32
• /
• 2020

PURPOSE. The aim of this study was to evaluate the microshear bond strength (µSBS) of four computer-aided design/computer-aided manufacturing (CAD/CAM) blocks repaired with composite resin using three different surface treatment protocols. MATERIALS AND METHODS. Four different CAD/CAM blocks were used in this study: (1) flexible hybrid ceramic (FHC), (2) resin nanoceramic (RNC), (c) polymer infiltrated ceramic network (PICN) and (4) feldspar ceramic (FC). All groups were further divided into four subgroups according to surface treatment: control, hydrofluoric acid etching (HF), air-borne particle abrasion with aluminum oxide (AlO), and tribochemical silica coating (TSC). After surface treatments, silane was applied to half of the specimens. Then, a silane-containing universal adhesive was applied, and specimens were repaired with a composite, Next, µSBS test was performed. Additional specimens were examined with a contact profilometer and scanning electron microscopy. The data were analyzed with ANOVA and Tukey tests. RESULTS. The findings revealed that silane application yielded higher µSBS values (P<.05). All surface treatments were showed a significant increase in µSBS values compared to the control (P<.05). For FHC and RNC, the most influential treatments were AlO and TSC (P<.05). CONCLUSION. Surface treatment is mandatory when the silane is not preferred, but the best bond strength values were obtained with the combination of surface treatment and silane application. HF provides improved bond strength when the ceramic content of material increases, whereas AlO and TSC gives improved bond strength when the composite content of material increases.

• Elastomers and Composites
• /
• v.42 no.2
• /
• pp.102-106
• /
• 2007

Water swelling behaviors of SBR vulcanizates with different reinforcing systems of carbon black, silica without a coupling agent, and silica containing a coupling agent were studied. Distilled water and 3.5% NaCl solution were used as swelling media. The water swelling ratios in the distilled water were higher than those in the salt solution. The water swelling ratios of the carbon black-filled samples were lower than those of the silica-filled ones. For the silica-filled SBR vulcanizates, the specimens without the silane coupling agent had higher water swelling ratios than those containing it. Water swelling behaviors of SBR composites with different 1,2-unit contents were also compared. The water swelling ratios tended to decrease by increasing the 1,2-unit content.