• Fashion & Textile Research Journal
• /
• v.12 no.6
• /
• pp.789-795
• /
• 2010

The purpose of this study was to examine the appropriate surplus of clothing for a jacket bodice pattern of middle-aged obese men by using the 3D virtual twin and virtual garment simulation system. The results were as follows ; 1. BMI rate of middle-aged males was 28.13 which was equivalent to mild obesity, whereas WHR(W/H ratio from waist to hips) rate was near 1.00 which was highly dangerous against their obesity. In case of middle-aged obese men, the WHR was significantly higher than the entire middle-aged men's average and the section shape in which their thickness was relatively more than width. 2. As a result of appearances evaluation through virtual garment simulation, the cut-off amount of the side seam and the center back was regulated accordingly. Hereby, the final tolerance range was set up at 21.15 cm at the hips, so that the appearances became better and the bilateral distribution of the cross section and space length was formed symmetrically. Especially in case of increasing the cross amount of hems to produce a natural silhouette of the waist-to-hips parts, the ease of buttocks was judged to be moderate, but it turned out that a wavy cross section was made and the silhouette was not good. Thus it was found to be not good that the ease of the hips became excessively increased in proportion as circumference of waist and belly were increased in obesity. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.480-491
• /
• 2010

This study investigates the body satisfaction and fitness apparel depending on age and silhouette. The subjects were 254 females 20~50 years of age living in Chungju South Korea. There are various body types in women over the age of 35, the lower part of the body-development type, regular type, the upper part of the body-development type, and the rectangular body type. In addition, there is a lower satisfaction level in circumferences related with apparel fit, especially in the sleeve length, armhole, and crotch length. Therefore, a size system is needed that considers various body types in ready-to-wear clothing for middle-aged women. Design, color, and pattern are most important in clothing purchases by unmarried women, but the ease of laundry management and price discounts are the most significant for clothing purchases by married women. The upper part of the body-development type is unsatisfactory in the size-fit of sleeve length and shoulder width, but the lower part of the body-development type is unsatisfactory in the circumference of the waist, hip, abdominal, girth of skirt, and crotch length. The rectangular body type and the lower part of the body-development type are unsatisfactory in movement comfort, especially in hip girth and crotch length. The upper part of the body-development type is unsatisfactory in the movement comfort of the chest and elbow girth.

• Journal of Fashion Business
• /
• v.2 no.1
• /
• pp.25-34
• /
• 1998

This study has it's purpose in examining the materialized background. characteristic of African traditional costume and the A fro fashion of the year 1960. and it's influence on the contemporary fashion. Then the findings are applied to suggest a new way of image creation. 1960' s was the year in which people tried to free oneself from the ruling culture of the social standards. war. and the development of science. By such movement. people started to get interested in the environment and ecology. This then lead to the interest of the rights of the minority. With the youngs as the central figure A fro hair style and dashiki appeared as the street fashion. The characteristics of African costume applied to A fro fashion in 1990' s is as below. First. the North African style. Djellaba. and wrap style in the most common silhouette. Second. heavy materials such as stone. copper. silver. and gold are used. Necklace can be classified according to it's simple but. modern style. delicate but grand style. Bracelets are however. broad in width and many rings are worn widely. Third. Multi colored stripe and prints inspired by tattoo and deformation using red brown. dark beige. and orange are printed on textiles such as see through. Fourth. image of tattoo and deformation are applied to make-up. A fro hair and corn beads are also African taste. Fifth. African taste in recent fashion showed off the black beauty by appointing black models at the collection. In analyzing the study done above. characteristic images of African costume. accessaries and body painting was applied in presenting 3 creative designs. The first design named "Geometric I", took it's motif from the geometric pattern of the body painting with the afro hair. "Geometric II", the second design, showed it's application of geometric pattern of mutilation and the silhouette of the costume by using the see through. The third design called the "Geometric III" showed that the aesthetic and decorative side of clothing can be satisfied by applying various form and color of accessaries as the motif. A fro fashion is chosen as one of the folklore mood and it's beauty is conveyed on till today.

• The Korean Journal of Applied Statistics
• /
• v.22 no.4
• /
• pp.745-758
• /
• 2009

Cluster analysis is the automated search for groups of related observations in a data set. To group the observations into clusters many techniques has been proposed, and a variety measures aimed at validating the results of a cluster analysis have been suggested. In this paper, we compare complete linkage, Ward's method, K-means and model-based clustering and compute validity measures such as connectivity, Dunn Index and silhouette with simulated data from multivariate distributions. We also select a clustering algorithm and determine the number of clusters of Korean consumers based on Korean consumers' palatability scores for Hanwoo bull in BBQ cooking method.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.1
• /
• pp.39-51
• /
• 2012

Cluster analysis has proven to be a useful tool for investigating the association structure among genes and samples in a microarray data set. We applied several cluster validation measures to evaluate the performance of clustering algorithms for analyzing microarray gene expression data, including hierarchical clustering, K-means, PAM, SOM and model-based clustering. The available validation measures fall into the three general categories of internal, stability and biological. The performance of clustering algorithms is evaluated using simulated and SRBCT microarray data. Our results from simulated data show that nearly every methods have good results with same result as the number of classes in the original data. For the SRBCT data the best choice for the number of clusters is less clear than the simulated data. It appeared that PAM, SOM, model-based method showed similar results to simulated data under Silhouette with of internal measure as well as PAM and model-based method under biological measure, while model-based clustering has the best value of stability measure.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.921-926
• /
• 2014

The aim of this study is to develop upper bodice pattern for obese girls aged 10~12 by using 3D virtual garment simulation system. The criteria for subjects in this study were girls who had over 1.46 of the R$\ddot{o}$hrer Index. A total of 229 schoolgirls who met these criteria were enrolled. The results of this study are as follows: First, by using 3D virtual garment simulation, new upper bodice pattern considered obese-schoolgirls was development. The basic numerical formula were as follows ; bust girth B/2+4.5, armhole depth B/4-1, waist girth W/4+0.5+dart amount, front chest width B/6+2, back width B/6+2, neck width B/12-0.5 and neck depth B/12+0.5. Second, armhole darts were added to compensate the loose amount of front armhole and dart manipulation was used to ensure a better appearance on armhole in the design. The dart side line was modified concavely to help cover the protruding stomach. Curved lines on the armhole were significantly relieved using dart manipulation and the darts side line was modified concavely to reduce the tightness around the front waist darts. Third, according to the results of the new upper bodice pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new upper bodice pattern was appropriate for the obese-schoolgirls. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns.

• Fashion & Textile Research Journal
• /
• v.14 no.4
• /
• pp.607-613
• /
• 2012

This study develops a Hanbok Jeogori pattern for middle-aged women with a 3D virtual-twin and virtual-garment simulation system. The including criteria for subjects in this study was a focus on women in their 50s, and a total of 345 females satisfying them were enrolled for 3D virtual model. Comparative Jeogori pattern, Baik & Choi's(2004) pattern, was selected for the development of Jeogori pattern. The results were: first, a new Jeogori pattern considerate of middle-aged women was developed. The basic numerical formula were: Front and back bust girth B/4+1.5, armhole depth B/4, sleeve width B/4, goedae width B/10-1.5 and git width 5.5. Second, according to the results of the new Jeogori patterns appearance evaluation, the new Jeogori pattern scored higher than the existing pattern in silhouette and ease amount, this confirmed that the new Jeogori pattern is appropriate for middle-aged women. Virtual models of production through data from 3D body scan, pattern draft, and virtual garment digital program were applied to a prototypic design method to enhance the fitness of ready-made Hanbok garments. This study serves as important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns and for the future 3D Pattern Production Program development of Hanbok patterns.

• Journal of the Korean Home Economics Association
• /
• v.41 no.9
• /
• pp.17-29
• /
• 2003

The objective of this study is to investigate the fit preference tendency for ready-to-wears(jackets, skirts, and slacks) of adult women and to find out the respective differences by the age range and the obesity level. The study method was the questionnaire survey with the subjects of 699 women of 20 up to 59 years of age. The questionnaire is composed of fit preference tendency, physical measurements, age, and occupation. For the data analysis, SPSS 90. program was used, and descriptive statistics, Crosstabs, ANOVA, Duncan's test, and t-test were conducted. The findings are as follows. 1. Regarding the fit preferred for each part of jackets, skirts, and slacks, among ready-to-wears, the 'thing with some extra width' in every part was most favored, followed by the 'thing fitting perfectly'. 2. The differences were found in the fit preference tendency by the age of adult women. The fit preference tendency was higher among those in their 20's than among those of the other age range, and those in their 30's and 40's preferred the clothes with less extra width in comparison with those in their 50's. 3. The differences were also found in the fit preference tendency by the obesity level of adult women. The fit preference tendency was high in the order of the emaciation, normalcy, and obesity types. 4. The fit preference tendency was found to be more affected by the obesity level than by the age. The fit preference tendency by the obesity level of each age range showed the differences in all of the age range. However, the normal type did not show the preference difference among the age ranges, in the fit preference tendency by the age range of each obesity level. Clothing manufacturing firms should understand the characteristics of consumers, such as their age, body type, extra width preferred, to provide the consumers of target market with suitable leeway, and they should design the clothing products which meet up these needs in style and silhouette.

• Fashion & Textile Research Journal
• /
• v.8 no.5
• /
• pp.552-561
• /
• 2006

This study was conducted to suggest an appropriate jacket bodice pattern for elderly women by comparing the developed pattern with existing ready-made jacket pattern. The developed jacket bodice pattern was produced from the basic sloper in which elderly women's somatotype was fully reflected, by using the newly developed 3D pattern design system. Subjects were 6 elderly women aged from 60 to 69 who have average somatotype in their age group. This study carried out pattern analysis and self-sensory test with three ready-made jackets(national brands) and suggested a developed jacket pattern based on the results. According to the self sensory test results of ready-made jacket, wearing fitness among brands was significantly different even though those brands were same B91 size. The results of ready-made jackets' pattern analysis, size differences among patterns have influenced wearing fitness. The basic numerical formula for the jacket pattern considered elderly women's somatotype were as follows; $B/4+2{\pm}0.2{\sim}0.5$(difference of front and back), $W/4+2{\pm}0.2{\sim}0.5$(difference of front and back), H/4+2~7(ease amount), armhole depth B/4, chest width B/6+1, back width B/6+3 and back neck width B/12+0.5. According to the results of the developed jacket's appearance evaluation, it earned higher scores in silhouette and ease amount, confirming that the developed jacket is appropriate for the elderly women. Also, in the evaluation on space length, the developed jacket pattern was evaluated to allow proper space length in all around of measurement parts.

• Fashion & Textile Research Journal
• /
• v.12 no.1
• /
• pp.86-93
• /
• 2010

The purpose of this study was to develop torso pattern of Middle-aged obese women by using the virtual twin and 3D virtual garment simulation system. The results were as follows; 1. By using 3D Virtual Garment Simulation, new torso pattern considered obese women was development. The basic numerical formula were as follows ; bust girth B/2+5, armhole depth B/6+5, front waist girth W/4+2+0.5, back waist girth W/4+1-0.5, front hip girth H/4+1+0.5, back hip girth H/4+2-0.5, chest width B/6+2.5, back width B/6+2.5 and back neck width B/20+2.5. 2. According to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern is appropriate for the obese women. Also, new torso pattern was evaluated to allow proper space length of bust, waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D Virtual Garment Simulation System with 2D patterns, and also for future 3D Pattern Production Program development.