• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.111-118
• /
• 2009

Factors causing traffic accidents are various and traffic law violations can be among them. The efforts to increase traffic law obedience rates of drivers are common in many other countries to reduce traffic accidents, and one of generally applied methods is to increase the amounts of violation fines. Expensive levels of traffic law violation fines could have drivers choose "obey the law" in their decision-making stages since they are economically better-off by following the law. In this sense, this study has developed an economic model to verify whether the current levels of the traffic violation fines of Korea are effective for drivers to choose "obey-the-law" decisions. Speed violations and traffic signal violations have been selected for the case study to verify the relationships between "expected probabilities of being-caught" and "levels of violations fines".

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.1-15
• /
• 2011

The RLC systems is one of the intelligent transportation systems that has gained a nation-wide support for last decades and being installed to discourage motorists from running the red lights at signalized intersections. It is taken for granted that the RLC will provide motorists with increased safety, so that their installments are always justifiable. However, in order to acquire more efficiency and wider supports from the general public in future RLC installments, an improved methodology for analyzing the effects of the RLC systems is required. In order to satisfy this requirement, this research performed the following tasks. First, the number of signal violations after the RLC systems were investigated in order to check its resulting effects. Second, the number of crashes after the RLC systems were collected and compared with the number of signal violations. Third, a statistical analysis was carried out to develop the relationships between the signal violations and the crashes based on negative binomial distribution. The analysis revealed that the number of crashes has a close relationship with the RLC placement, traffic volume, vehicle speed, the number of phases, and the number of lanes for major approaches. Finally, based on the results found in this analysis, this research presents a methodology for analyzing the safety effects of placing the RLC that should be of service when investigating the economic consequences of the RLC systems.

• Safety and Health at Work
• /
• v.10 no.2
• /
• pp.213-218
• /
• 2019

Background: Motorcycles are one of the important members of commercial transportation because of the convenient use during congested traffic conditions and the ease of parking in narrow streets. This study investigates the characteristics of crashes and traffic signal violations caused by motorcycle couriers. Methods: From the national compensation data, this study analyzed the traffic crashes caused by 671 motorcycle couriers. Results: Among 671 injured couriers, 50.6% were aged less than 40 years, 49.2% run in a small business of <5 employees, and 47.2% had work experience of <6 months. Motorcycle crashes occurred mainly due to "rider overturned alone" (67.5%), in the daytime (73.5%), or on cloudy or clear days (77.2%). However, the violation rate caused by motorcycle couriers was high in couriers in a small business of <5 employees (13.9%), with work experience of <6 months (13.9%), on cloudy or clear days (12.4%), on an intersection (29.8%), in the type of "crash with a vehicle" (31.2%), or in a death accident (35.7%) Conclusion: The findings of this study can be used as a baseline in devising policies for preventing crashes of motorcycle couriers.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.115.5-115
• /
• 2002

In this paper, we introduce a system that detects all kinds of violations at a street intersection such as red light running, speed violation, stop line violation and lane violation by tracking individual vehicles. Two cameras are used for defecting violations. One is an analog camera for real-time tracking and the other is a digital camera for license plate reading. This system is connected to the traffic signal system controller and monitors the red, arrow, yellow and green phases of an approach. Two loops in the road are used to detect vehicle approach and speed. The system takes pictures of all vehicles passing a second loop and tracks the vehicles until they go out a street intersection...

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1934-1937
• /
• 2022

The meaning of crosswalks and traffic lights in modern society has changed a lot as the enforcement of traffic signal violations has been strengthened. In this paper, we present a new next-generation traffic light method using radar and Can-bus communication methods suitable for the new traffic signal enforcement system. This method is a system that prevents accidents by transmitting information on the entry of a person and a car to a traffic light in a place where a person and a car passing through a mutually invisible traffic light cannot be seen. Since this system has only been developed for a month, it may be somewhat lacking in experimentation. However, in just one month, there have been no incidents except for a few people where the system has been installed.

• Journal of KSNVE
• /
• v.4 no.3
• /
• pp.307-318
• /
• 1994

Existence of any nonlinearity in responses of a nonlinear system is tested using a kurtosis or a fourth moment which has been widely used to characterize signal patterns. By inputting a harmonic signal to a system and investigating the distortions of an output signal from a harmonic pattern, which are due to violations of proportionality between the input and the output, it is judged whether the output is generated from a nonlinear system or not. Through applying the method presented in this work to simulation studies on detections of nonlinearities of a single degree of freedom system, in which three kinds of nonlinearities are treated as restoring force terms, feasibilities of the method are shown and the range of both frequency and input amplitude, in which the system generates nonlinear responses, is determined.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.553-560
• /
• 2010

This study examined the factors influencing the number of enforcement cases on traffic signal violation. The study collected enforcement data on traffic signal violation by multi-functional unmanned cameras across the Daegu metropolitan area, and analyzed the data to determine correlations among various factors including physical dimensions and engineering characteristics of the roadway as to how they would influence the number of violations. The resulting analysis provided a general model that assesses applicability for multi-functional unmanned cameras, and further shed helpful insights on efficient utilization of such traffic signal enforcement equipments in terms of installation thresholds and location. By identifying violation-prone features and characteristics and subsequent enforcement considerations, this research also supports safety efforts in reducing the number of traffic accidents as well.

• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.12-21
• /
• 2004

Error control is one of major concerns in many electronic systems. Experience shows that most malfunctions during system operation are caused by transient faults, which often mean abnormal signal delays that may result in violations of circuit element timing constraints. This paper presents a novel CMOS-based concurrent timing error detector that makes a flip-flop to sense and then signal whether its data has been potentially corrupted or not by a setup or hold timing violation. Designed circuit performs a quiescent supply current evaluation to determine timing violation from the input changes in relation to a clock edge. If the input is too close to the clock time, the resulting switching transient current in the detection circuit exceeds a reference threshold at the instant of the clock transition and an error is flagged. The circuit is designed with a $0.25{\mu}m$ standard CMOS technology at a 2.5 V supply voltage. The validity and effectiveness are verified through the HSPICE simulation. The simulation results in this paper shows that designed circuit can be used to detect setup and hold time violations effectively in clocked circuit element.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.424-430
• /
• 2021

Determining the cause of a traffic signal violation is difficult if the drivers' claims are contradictory. In this study, the process of identifying signal violations using a simulation was presented based on cases. First, statements from the driver or witness whose cause of the signal violation is unclear were excluded. Second, the final position, final location, damaged area, steering status, braking status, and road surface traces of the vehicle were collected. The impact point was investigated from the stop line. Third, simulation data were modified and entered until the collision situation of the accident vehicle and the final stop position were met. Fourth, if the simulation results were consistent with the crash situation, the facts were verified by cross-validation to conform to the driver's statement. The results of the simulation showed that the Lexus entered the left turn signal in the intersection at approximately 55 km/h. In comparison, the Sonata driver saw the vehicle straight ahead at the intersection, entered the 72 km/h intersection, and collided with the Lexus. Therefore, the Sonata was identified as a signal violation, and the claims of the Sonata driver, witnesses, and police were contradictory.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.89-98
• /
• 2007

Nowadays, aggressive driving is a common driving behavior and it is raised as a dangerous factor for both drivers and passengers. However, it is hard to find studies on aggressive driving in Korea, and even the definition of aggressive behavior is not clearly explained. In this study, the term "aggressive behavior" is defined based on previous studies, and the significance of several psycho-social factors which affect aggressive driving were verified with the 'habit' factor from the Theory of Planned Behavior (TPB). In the pilot study, domestic drivers reported that aggressive behaviors included speeding, traffic light signal violation, and improper passing (cutting drivers off when passing). In this study, controlling the demographic characteristics of these three aggressive behaviors, the authors explored the relationship of the behaviors with TPB factors such as the habit factor. Consequently, in the case of drivers' intentions for speeding and traffic light signal violations, subjective norm, perceived behavioral controllability, and habit were significant factors. In the case of intentions for improper passing, only perceived behavioral controllability and habit were significant. In speeding behavior and traffic light signal violations, only habit was significant besides intention; however, in improper passing, both perceived behavioral controllability and habit were significant besides intention. The authors also tested an alternative model including TPB and habit factors for three types of aggressive driving. Finally, there are several implications for a possible intervention program for aggressive driving, though there are some limitations of the study.