• 대한기계학회논문집A
• /
• 제21권8호
• /
• pp.1332-1338
• /
• 1997

In the case of the transfer function for the secondary path is dependent on time, the on-line method which can model it is continuously must be applied to the active noise control technique. And the adaptive random noise technique among the on-line methods is effective in the narrow-band control. In this method, the signal to noise ratio between random noise for modeling and primary noise is low. Therefore, the estimations of transfer function will be prone to inaccuracies and the convergence time will be too long. Such imperfections will have an influence upon the performance of an active noise controller. In this study, t enhance the signal to noise ratio, the on-line method that is combined the conventional adaptive random noise technique and the adaptive line enhancer, is proposed. By using proposed on-line method, a rigorous system identification and control of primary noise have been implemented.

• 한국소음진동공학회논문집
• /
• 제18권8호
• /
• pp.823-831
• /
• 2008

Since it needs the light computational load and small database, sound source localization method using time delay of arrival(TDOA method) is applied at many research fields such as a robot auditory system, teleconferencing and so on. Researches for time delay estimation, which is the most important thing of TDOA method, had been studied broadly. However studies about factors for time delay estimation are insufficient, especially in case of real environment application. In 1997, Brandstein and Silverman announced that performance of time delay estimation deteriorates as reverberant time of room increases. Even though reverberant time of room is same, performance of estimation is different as the specific part of signals. In order to know that reason, we studied and analyzed the factors for time delay estimation using speech signal and room impulse response. In result, we can know that performance of time delay estimation is changed by different R/D ratio and signal characteristics in spite of same reverberant time. Also, we define the performance index(PI) to show a similar tendency to R/D ratio, and propose the method to improve the performance of time delay estimation with PI.

• 대한전자공학회논문지
• /
• 제10권1호
• /
• pp.18-26
• /
• 1973

AM파의 검파에 있어서 반송파의 주파수와 변조신호의 현파수와의 비가 10:1 이하로 되면 종래의 AM검파기로는 만족할만한 파형의 검파출력을 얻을 수 없다. 이와같이 초광대성 AM신호의 검파가 불가능하였든 것은 검파회로내에 있는 R-C 회로의 충방전현상으로 인한 것이며 이것이 AM 또는 FM초다중통신의 통신용량을 제안하는 한 원인이되고 있다. 본논문에서는 이 문제의 해결책으로서 다상포낙선검파법을 제안하며 아울러 동검파법의 이론적인 해석도 제시하였다. 본다상포낙선검파법을 이용하면 AM파의 반송파의 편파수와 변조신호의 편파수와의 비가 1:1에 가까울때에도 요구되는 여하한 충실도라도 충족시킬수 있는 AM검파파형을 얻을 수 있다. 본다상포낙선검파법의 이론적인 뒷받침을 위하여 본논문에서 제창한 두가지의 구성방안중에서 주파수변환방식을 대하여 실험하였다.

• 센서학회지
• /
• 제8권2호
• /
• pp.148-153
• /
• 1999

본 논문에서는 자기 표적 검출시스템의 신호 대 잡음비 개선을 위하여 자기환경 필터를 설계하고 하드웨어로 구현하였다. 자기환경 필터를 이용하면 간섭성 잡음을 제거시켜 신호 대 잡음비를 개선시킬 수 있다. 시뮬레이션 결과 자기환경 필터는 간섭성 잡음을 소거시킬 뿐만 아니라 센서의 오배치에 의한 오차를 제거하고 지역적으로 국한된 규칙적인 잡음도 제거할 수 있음을 알 수 있었다. 또한 자기표적 검출 시스템의 하드웨어를 설계, 제작하고 실험을 통하여 획득된 신호에 자기환경 필터 알고리즘을 적용할 경우 약 19dB 정도의 신호 대 잡음비 개선효과를 확인하였으며 자기원 신호의 손상이 거의 없는 상태에서 간섭성 잡음을 제거할 수 있음을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2221-2229
• /
• 2022

In this research, for improving the measurement performance of Prompt Gamma-ray Neutron Activation Analysis (PGNAA) set-up, a new optimization method for set-up design was proposed and investigated. At first, the calculation method for Signal-to-Noise Ratio (SNR) was proposed. Since the SNR could be calculated and quantified accurately, the SNR was chosen as the evaluation parameter in the new optimization method. For discussing the feasibility of the SNR optimization method, two kinds of PGNAA set-ups were designed in the MCNP code, based on the SNR optimization method and the previous signal optimization method, respectively. Meanwhile, the single element spectra analysis method was proposed, and the analysis effect of single element spectra as well as element sensitivity were used for comparing the measurement performance. Since the simulation results showed the better measurement performance of set-up designed by SNR optimization method, the experimental set-ups were built for the further testing, finally demonstrating the feasibility of the SNR optimization method for PGNAA setup design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.341-343
• /
• 2005

This paper introduces a compression algorithm for power quality disturbance signal via the discrete wavelet transform, DWT. Algorithm to estimate a time delay from the power quality disturbance signal is proposed. Pseudo-stationary signal is constructed from the estimated time delay. A difference signal or nonstationary signal is obtained by removing a pseudo-stationary signal from a disturbance signal. DWT is applied to a difference signal. The threshold is applied to reduce a number of coefficients. Simulation results show the resonable compression ratio while keep low signal distortion.

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1677-1688
• /
• 2020

In the sodium-cooled fast reactor, the steam generator is a heat exchange device between sodium and water, which may cause leakage, resulting in a sodium-water reaction accident, which in turn affects the safe operation of the entire nuclear reactor. To this end, the electromagnetic vortex flowmeter is used to detect leakage of the steam generator and its signal processing method is studied in this paper. The hydraulic experiment was carried out by using water instead of liquid sodium, and the sensor output signal of the electromagnetic vortex flowmeter under different gas injection volumes was collected. The bubble noise signal is reflected by the base line of the sensor output signal. According to the relationship between the proportion of the bubble noise signal in the sensor output signal and the gas injection volume, a signal processing method based on the energy ratio calculation is proposed to detect whether the water contains bubbles. The gas injection experiment of liquid sodium was conducted to verify the effectiveness of the signal processing method in the detection of bubbles in sodium, and the minimum detectable leak rate of water in the steam generator was detected to be 0.2 g/s.

• 한국음향학회지
• /
• 제8권4호
• /
• pp.65-73
• /
• 1989

본 연구에서는, VQ(vector quantization)와 모음 인식에 기초한 화자 인식 알고리즘을 제안하고, 기존의 VQ를 사용한 화자 인식 알고리즘과 성능을 비교하였다. 제안된 화자 인식 알고리즘은 모음 분리, 모음 인식 그리고 평균 distortion양을 계산하는 3개의 과정으로 구성되며, 이때 주어진 음성 신호로부터 모음 부분을 분리하기 위해 RMS 에너지, BTR(Back-to-Total cavity volume Ratio) 그리고 SFBR(Signed-Front-to-Back maximum area Ratio)이 라는 3개 의 Parameter를 사용하였다. 입력 음성 신호의 SNR이 20 dB이고 정확한 모음 분리가 수행되었을 때, 제안된 화자 인식 알고리즘의 성능이 기존의VQ를 사용한 화자 인식 알고리즘의 성능보다 대체로 좋았으며, 입력 신호가 전화선을 통과한 신호이고 잡음이 있는 경우에도 유사한 결과를 얻을 수 있었다

• 전자공학회논문지D
• /
• 제35D권8호
• /
• pp.69-75
• /
• 1998

We demonstrate wavelength conversion of 2.5Gb/s optical signals by four-wave mixing (FWM) in a semiconductor optical amplifier (SOA). We investigate the effect of input pump and signal powers on the coversion efficiency, optical signal-to-noise ratio (OSNR) and extinction ratio to be a measure of performance in a wavelength converter. As a result, we show that the maximum bit error rate (BER) performance can be obtained by co promising among high-vonversion efficiency (minimum Pprobe), high-OSNR (maximum Pprobe) and low-cross-gain saturation effects (Pprobe kept at least 6dB weaker than Ppump). In our experiment, we obtain optimum performance at +3 dBm pump power and -6dBm signal power. The power penalty incurred in the wavelength conversion can be minimized by careful selection of the input pump and signal powers. We show that about 0.5dB power penalty for 3.2nm wavelength coversion at 10-10 BER is achievable.

• 대한전자공학회논문지
• /
• 제20권1호
• /
• pp.55-62
• /
• 1983

임펄스 잡음과 동일 채널 간섭 환경하에서 PSK 시스템의 오율 특성을 반송파대 잡음 전력비, 반송파대 간섭파 전력비, 임펄스 지수 및 신호와 간섭파간의 위상차의 함수로써 구명했다. 동기 위상 검출기의 출력에 대한 확률 밀도 함수(p.6.f.)의 일반식을 도출하여 2상 PSK 신호의 경우에 대한 수치 계산의 결과를 그래프로 나타냈다. 해석 결과 신호와 간섭파 간의 상대 위상차가 90℃일때 오율 특성이 가장 좋게됨을 알 수 있었다.