• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1999-2005
• /
• 2005

Collaboration in wireless sensor networks must be fault-tolerant due to the harsh environmental conditions in which such networks can be deployed. This paper focuses on finding signal processing algorithms for collaborative target detection based on the generalized approach to signal processing in the presence of noise that are efficient in terms of communication cost, precision, accuracy, and number of faulty sensors tolerable in the wireless sensor network. Two algorithms, namely, value fusion and decision fusion constructed according to the generalized approach to signal processing in the presence of noise, are identified first. When comparing their performance and communication overhead, decision fusion is found to become superior to value fusion as the ratio of faulty sensors to fault free sensors increases. The use of the generalized approach to signal processing in the presence of noise under designing value and decision fusion algorithms in wireless sensor networks allows us to obtain the same performance, but at low values of signal energy, as under the employment of universally adopted signal processing algorithms widely used in practice.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.627-630
• /
• 1998

In this study, we derived stop-and-go normalized DD, dual-mode normalized sato, dual-mode NCMA blind equalization algorithm for complex data. and then, the convergence characteristics of the proposed SG-NDD, dual-mode NSato blind equalization algorithms are compared with those of SG-DD, dual-mode sato algorithm. In genral, the normalized blind equalization algorithms have better convergence characteristics than the conventional algorithms.

• Journal of Biomedical Engineering Research
• /
• v.6 no.2
• /
• pp.15-22
• /
• 1985

We have developed a microprogramir!able signal processor for real-time ultrasonic signal processing. Processing speed was increased by the parallelism in horizontal microprogram using 104bits microcode and the Pipelined architecture. Control unit of the signal processor was designed by microprogrammed architec- ture and writable control store (WCS) which was interfaced with host computer, APPLE- ll . This enables the processor to develop and simulate various digital signal processing algorithms. The performance of the processor was evaluated by the Fast Fourier Transform (FFT) program. The execution time to perform 16 bit 1024 points complex FF7, radix-2 DIT algorithm, was about 175 msec with IMHz master Clock. We can use this processor to Bevelop more efficient signal processing algorithms on the biological signal processing.

• Journal of Biomedical Engineering Research
• /
• v.6 no.2
• /
• pp.13-14
• /
• 1985

We have developed a microprogramir!able signal processor for real-time ultrasonic signal processing. Processing speed was increased by the parallelism in horizontal microprogram using 104bits microcode and the Pipelined architecture. Control unit of the signal processor was designed by microprogrammed architec- ture and writable control store (WCS) which was interfaced with host computer, APPLE- ll . This enables the processor to develop and simulate various digital signal processing algorithms. The performance of the processor was evaluated by the Fast Fourier Transform (FFT) program. The execution time to perform 16 bit 1024 points complex FF7, radix-2 DIT algorithm, was about 175 msec with IMHz master Clock. We can use this processor to Bevelop more efficient signal processing algorithms on the biological signal processing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.7
• /
• pp.641-647
• /
• 2015

In this paper, Analyzed the multi-channel signal processing algorithms for digital-transponder. To analyze suitable multi-channel signal processing algorithms, compare algorithms about four criteria. Four criteria are as follows, perfect reconstruction, interference rejection, resource usage and power consumption. Analysis for each algorithm in accordance with these four criteria. then propose the multi-channel signal processing algorithms for digital satellite communication system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.4
• /
• pp.269-282
• /
• 2009

This paper presents a novel approach for Lamb wave based structural health monitoring(SHM) in honeycomb aluminum panels. In this study, a suite of three signal processing algorithms are employed to improve the damage detection capability. The signal processing algorithms used include wavelet attenuation, correlation coefficients of power density spectra, and triangulation of reflected waves. Piezoelectric transducers are utilized as both sensors and actuators for Lamb wave propagation. These SHM algorithms are built into a MatLab interface that integrates and automates the hardware and software operations and displays the results for each algorithm to the analyst for side by side comparison. The effectiveness of each of these signal processing algorithms for SHM in honeycomb aluminum panels under a variety of damage conditions is then demonstrated.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.4
• /
• pp.467-475
• /
• 2016

Ultrasonic propagation imaging (UPI) has shown great potential for detection of impairments in complex structures and can be used in wide range of non-destructive evaluation and structural health monitoring applications. The software implementation of such algorithms showed a tendency in time-consumption with increment in scan area because the processor shares its resources with a number of programs running at the same time. This issue was addressed by using field programmable gate arrays (FPGA) that is a dedicated processing solution and used for high speed signal processing algorithms. For this purpose, we need an independent and flexible block of logic which can be used with continuously evolvable hardware based on FPGA. In this paper, we developed an FPGA-based ultrasonic propagation imaging system, where FPGA functions for both data acquisition system and real-time ultrasonic signal processing. The developed UPI system using FPGA board provides better cost-effectiveness and resolution than digitizers, and much faster signal processing time than CPU which was tested using basic ultrasonic propagation algorithms such as ultrasonic wave propagation imaging and multi-directional adjacent wave subtraction. Finally, a comparison of results for processing time between a CPU-based UPI system and the novel FPGA-based system were presented to justify the objective of this research.

• Journal of Information Processing Systems
• /
• v.15 no.4
• /
• pp.748-764
• /
• 2019

In order to deal with the filtering delay problem of least mean square adaptive filter noise reduction algorithm and music noise problem of spectral subtraction algorithm during the speech signal processing, we combine these two algorithms and propose one novel noise reduction method, showing a strong performance on par or even better than state of the art methods. We first use the least mean square algorithm to reduce the average intensity of noise, and then add spectral subtraction algorithm to reduce remaining noise again. Experiments prove that using the spectral subtraction again after the least mean square adaptive filter algorithm overcomes shortcomings which come from the former two algorithms. Also the novel method increases the signal-to-noise ratio of original speech data and improves the final noise reduction performance.

• Journal of Biomedical Engineering Research
• /
• v.19 no.4
• /
• pp.369-377
• /
• 1998

This paper describes the results of investigations comparing the relative in vitro responses of different signal processing algorithms for laser Doppler flowmetry(LDF) using self-mixing effect of laser diode(LD). A versatile laser Doppler system is described which enabled complex signal processing to be implemented relatively simply using digital analysis. The flexibility of the system allowed a variety of processing algorithms to be studied by simply characterising the algorithm of interest under software control using a personal computer. Two in-vitro physical models are also presented which was used to maintain reproducible fluid flows Flows of particles were studied in two physical models using a 780nm laser diode source. The results show that frequency weighted algorithms(first and second moments, rate to zero moment) are responsive to particle velocity more than concentration, whereas non-weighted algorithm (zero moment responds to concentration and velocity.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.9
• /
• pp.33-42
• /
• 1997

Fixed-point optimization utility software that can aid scaling and wordlength determination of digital signal processign algorithms written in C or C$\^$++/ language is developed. This utility consists of two programs: the range estimator and the fixed-point simulator. The former estimates the ranges of floating-point variables for automatic scaling purpose, and the latter translates floating-point programs into fixed-point equivalents for evaluating te fixed-point performance by simulation. By exploiting the operator overloading characteristics of C$\^$++/ language, the range estimation and the fixed-point simulation can be conducted just by modifying the variable declaration of the original program. This utility is easily applicable to nearly all types of digital signal processing programs including non-linear, time-varying, multi-rate, and multi-dimensional signal processing algorithms. In addition, this software can be used for comparing the fixed-point characteristics of different implementation architectures.