• The Journal of the Acoustical Society of Korea
• /
• v.31 no.8
• /
• pp.532-541
• /
• 2012

An underwater transient signal is distinguished from an ambient noise. Database for the underwater transient signal is required since the underwater transient signal shows various characteristics depending on acoustic features. In the paper, hence, sound mask-filter was applied to extract the transient signals which exist temporally and locally in the ocean. The standard signal was chosen and cross-correlated with the raw signal. A mask-filter for a transient signal was obtained using the threshold which was decided by the maximum likelihood method in the envelope of the cross-correlated signal. Using the sound mask-filter, the transient signal of a sea catfish {Galeichthys felis (Linnaeus)} was extracted from the underwater ambient noise. Similarly, the man-made signal was added into the noise and it was extracted by the same method. We also have demonstrated the significance of the transient signal through comparing the extracted signals depending on the standard signal. In the results, the proposed method, sound mask-filtering, could be utilized as a database construction of the transient signals in underwater noise. Particularly, this study would be useful to extract the wanted signal from arbitrary signals.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.4
• /
• pp.276-280
• /
• 2016

A fixed rate speech coder based on the filter bank and the non-uniform sampling technique is proposed. The non-uniform sampling is achieved by the detection of inflection points (IPs). A speech block is band passed by the filter bank, and the subband signals are processed by the IP detector, and the detected IP patterns are compared with entries of the IP database. For each subband signal, the address of the closest member of the database and the energy of the IP pattern are transmitted through channel. In the receiver, the decoder recovers the subband signals using the received addresses and the energy information, and reconstructs the speech via the filter bank summation. As results, the coder shows fixed data rate contrary to the existing speech coders based on the non-uniform sampling. Through computer simulation, the usefulness of the proposed technique is confirmed. The signal-to-noise ratio (SNR) performance of the proposed method is comparable to that of the uniform sampled pulse code modulation (PCM) below 20 kbps data rate.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.2
• /
• pp.51-58
• /
• 1993

This paper describes the development of a speaker-dependent isolated word recognizer as applied to voice dialing in a car noise environment. for this purpose, several methods to improve performance under such condition are evaluated using database collected in a small car moving at 100km/h The main features of the recognizer are as follow: The endpoint detection error can be reduced by using the magnitude of the signal which is inverse filtered by the AR model of the background noise, and it can be compensated by using variants of the DTW algorithm. To remove the noise, an autocorrelation subtraction method is used with the constraint that residual energy obtainable by linear predictive analysis should be positive. By using the noise rubust distance measure, distortion of the feature vector is minimized. The speech recognizer is implemented using the Motorola DSP56001(24-bit general purpose digital signal processor). The recognition database is composed of 50 Korean names spoken by 3 male speakers. The recognition error rate of the system is reduced to 4.3% using a single reference pattern for each word and 1.5% using 2 reference patterns for each word.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.38-41
• /
• 2003

There are many kinds of algorithms used for the purpose of data mining. But without the understanding the underlying principles in the algorithm, the result of the data mining cannot be interpreted correctly. In this paper, the principle of ID3 algorithm is explained for that purpose. In addition, the way how to generate good training examples from the relational database is treated, as well as how to convert continuous values into discrete values is considered to use the algorithm for the data mining of real world database.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.49-54
• /
• 2021

Indoor positioning system becomes of increasing interests due to the demands for accurate indoor location information where Global Navigation Satellite System signal does not approach. Wi-Fi access points (APs) built in many construction in advance helps developing a Wi-Fi Received Signal Strength Indicator (RSSI) based indoor localization. This localization method first collects pairs of position and RSSI measurement set, which is called fingerprint database, and then estimates a user's position when given a query measurement set by comparing the fingerprint database. The challenge arises from nonlinearity and noise on Wi-Fi RSSI measurements and complexity of handling a large amount of the fingerprint data. In this paper, machine learning techniques have been applied to implement Wi-Fi based localization. However, most of existing indoor localizations focus on single position estimation. The main contribution of this paper is to develop multi-target localization by using deep neural, which is beneficial when a massive crowd requests positioning service. This paper evaluates the proposed multilocalization based on deep learning from a multi-story building, and analyses its learning effect as increasing number of target positions.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.175-181
• /
• 1993

In this paper, a practical method to generate task strategies applicable to chamferless and high-precision assembly, is proposed. The difficulties in devising reliable assembly strategies result from various forms of uncertainty such as imperfect knowledge on the parts being assembled and functional limitations of the assembly devices. In approach to cope with these problems, the robot is provided with the capability of learning the corrective motion in response to the force signal trrough iterative task execution. The strategy is realized by adopting a learning algorithm and represented in a binary tree type database. To verify the effectiveness of the proposed algorithm, a series of simulations and experiments are carried out under assimilated real production environments. The results show that the sensory signal-to-robot action mapping can be acquired effectively and, consequently, the chamferless assembly can be performed successfully.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.55-66
• /
• 2021

In this paper, we propose a signal propagation modeling technique for generating a positioning fingerprint DB based on Long Term Evolution (LTE) signals. When a DB is created based on the location-based signal information collected in an urban area, gaps in the DB due to uncollected areas occur. The spatial interpolation method for filling the gaps has limitations. In addition, the existing gap filling technique through signal propagation modeling does not reflect the signal attenuation characteristics according to directions occurring in urban areas by considering only the signal attenuation characteristics according to distance. To solve this problem, this paper proposes a Deep Neural Network (DNN)-based signal propagation functionalization technique that considers distance and direction together. To verify the performance of this technique, an experiment was conducted in Seocho-gu, Seoul. Based on the acquired signals, signal propagation characteristics were modeled for each method, and Root Mean Squared Errors (RMSE) was calculated using the verification data to perform comparative analysis. As a result, it was shown that the proposed technique is improved by about 4.284 dBm compared to the existing signal propagation model. Through this, it can be confirmed that the DNN-based signal propagation model proposed in this paper is excellent in performance, and it is expected that the positioning performance will be improved based on the fingerprint DB generated through it.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.9
• /
• pp.2590-2608
• /
• 2023

The high-altitude and mobility characteristics of unmanned aerial vehicles (UAVs) have made them a key element of new radio systems, particularly because they can exceed the limits of terrestrial networks. However, at high altitudes, UAVs can be significantly affected by intercell interference at a high line-of-sight probability. To mitigate this drawback, we propose an algorithm that selects the optimal beam to reduce interference and maximize transmission efficiency. The proposed algorithm comprises two steps: constructing a user-location-based fingerprint database according to the user types presented herein and cooperative beam selection. Simulations were conducted using cellular cooperative downlink systems for analyzing the performance of the proposed method, and the signal-to-interference-plus-noise cumulative distribution function and spectral efficiency cumulative distribution function were used as performance analysis indicators. Simulation results showed that the proposed algorithm could reduce the effect of interference and increase the performance of the desired signal. Moreover, the algorithm could efficiently reduce overheads and system cost by reducing the amount of resources required for information exchange.

• Journal of Korean Library and Information Science Society
• /
• v.23
• /
• pp.329-362
• /
• 1995

Newspaper Article Information is an important source of information on social phenomenon with historical value. The development of computer and technology of information communication enables the construction of Newspaper Article Database by CTS and service through computer communication. It made it possible for the peoples to utilize the Newspaper Article Information easily. However, it is very difficult to utilize the currently prevailing system. There are differences in classification system of Newspaper Article Database and the Data Display Format. This survey aims to review the characteristics of Newspaper Article Database and current domestic computer communication service system. By comparing the classification system of Retrieval Menu and Data Display Format, I intended to suggest the standardized way of utilization which enables the users utilize them more easily and conveniently. The results of this survey is as follows : 1. More sub-divided distinction of classification item is required. 2. Separate classification item should be established for the distinction of article form which is very difficult to classify the subject. 3. Data Display Format should be equi n.0, pped with standardized format and signal which enables the users recognize it easily.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.325-327
• /
• 2004

ECG limb lead II signal widely used to diagnosis heart diseases and it is essential to detect ECG events (onsets, offsets and peaks of the QRS complex P wave and T wave) and extract them from ECG signal for heart diseases diagnoses. However, it is very difficult to develop standardized feature extraction formulas since ECG signals are varying on patients and disease types. In this paper, simple feature extraction method from normal and abnormal types of ECG signals is proposed. As a signal features, heart rate, PR interval, QRS interval, QT interval, interval between S wave and baseline, and T wave types are extracted. To show the validity of proposed method, Right Bundle Branch Block (RBBB), Left Bundle Branch Block (LBBB), Sinus Bradycardia, and Sinus Tachycardia data from MIT-BIH arrhythmia database are used for feature extraction and the extraction results showed higher extraction capability compare to conventional formula based extraction method.