• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.757-766
• /
• 2014

To compensate signal loss due to the channel blockage in satellite communication link, we propose a cooperative communication scheme for OTM(On-The-Move) terminal in next generation satellite communication systems. The proposed scheme configures cooperation subnet with adjacent OTM terminal with the help of ground communication equipment. Shared data is spread by orthogonal spreading code, then the spread sequences are transmitted simultaneously. The receiver combines the power of received signals by EGC(Equal gain combining). The OTM terminal blockage channel is modeled by 2-state Markov chain. We evaluate the bit error rate according to the blockage channel of the channel state for the performance analysis of the proposed scheme. As a result, the proposed scheme shows better BER performance than traditional scheme with the help of subset members. In particular, the proposed scheme shows superior performance as the channel block probability is higher. However, as the number of subset members is increasing, there is a constraint because of the higher multiple access interference.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.79-88
• /
• 2020

We determined Global Positioning System (GPS) satellite visibilities in signal-blockage simulations and then analyzed Position Dilution of Precision (PDOP) fluctuations obtained from those simulated satellite geometries. PDOP values under harsh signal-blockage simulation conditions become very high compared to those calculated with real observations. Especially when the number of observed satellites is four, which is the minimum requirement for GPS positioning, PDOP values instantaneously reached several hundreds or even several tens of thousands. It was also found that the volume of the tetrahedron composed with four satellites decreases significantly. When the correlation of the tetrahedron volume and PDOP was analyzed, we reached the following conclusions: PDOP values less than 4 can be acquired when the volume is larger than 103.2 × 10¹⁹ ㎥, and PDOP values increase beyond 50 when the volume is less than 6.0 × 10¹⁹ ㎥.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.6
• /
• pp.599-606
• /
• 2014

Since the accuracy of Global Positioning System (GPS)-based vehicle positioning system is significantly degraded or does not work appropriately in the urban canyon, the integration techniques of GPS with Inertial Navigation System (INS) have intensively been developed to improve the continuity and reliability of positioning. However, its accuracy is degraded as INS errors are not properly corrected due to the GPS signal blockage. Recently, the image-based positioning techniques have been started to apply for the vehicle positioning for the advanced in processing techniques as well as the increased the number of cars installing the camera. In this study, Single Photo Resection (SPR), which calculates the camera exterior orientation parameters using the Ground Control Points (GCPs,) has been integrated with the INS/GPS for continuous and stable positioning. The INS/GPS/SPR integration was implemented in both of a loosely and a tightly coupled modes, based on the Extended Kalman Filter (EKF). In order to analyze the performance of INS/SPR integration during the GPS outage, the simulation tests were conducted with a consideration of factors affecting SPR performance. The results demonstrate that the accuracy of INS/SPR integration is depended on magnitudes of the GCP errors and SPR processing intervals. Additionally, the simulation results suggest some required conditions to achieve accurate and continuous positioning, used the INS/SPR integration.

• Journal of Navigation and Port Research
• /
• v.36 no.6
• /
• pp.429-435
• /
• 2012

Although GNSS hardware and software technologies have been steadily advanced, it is still difficult to obtain reliable positioning results in the area with lots of signal blockage. In this study, algorithms for integrated GPS and GLONASS double difference relative positioning were developed and its performance was validated via simulations of signal blockages. We assumed that signal blockages are caused by high-rise buildings to the east, west, and south directions. And then, GPS-only and integrated GPS/GLONASS positioning accuracy was analysed in terms of 2-dimensional positioning accuracies. Compared with GPS-only positioning, the positioning accuracy of integrated GPS/GLONASS improved by 0.3-13.5 meters.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.98-113
• /
• 2016

A reactor vessel level monitoring system measures the water level in a reactor during normal operation and abnormal conditions. A drop in the water level can expose nuclear fuel, which may lead to fuel meltdown and radiation spread in accident conditions. A level monitoring system mainly consists of a sensing line and pressure transmitter. Over a period of time boron sediments or other impurities can clog the line which may degrade the accuracy of the monitoring system. The aim of this study is to determine blockage in a sensing line using the energy of the composite signal. An equivalent Pi circuit model is used to simulate blockages in the sensing line and the system's response is examined under different blockage levels. Composite signals obtained from the model and plant's unblocked and blocked channels are decomposed into six levels of details and approximations using a wavelet filter bank. The percentage of energy is calculated at each level for approximations. It is observed that the percentage of energy reduces as the blockage level in the sensing line increases. The results of the model and operational data are well correlated. Thus, in our opinion variation in the energy levels of approximations can be used as an index to determine the presence and degree of blockage in a sensing line.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1590-1610
• /
• 2016

The challenge of penetrating obstacles along with impact from weak multipath effects makes 60GHz signal very difficult to be transmitted in non-line of sight (NLOS) channel. So 60GHz system is vulnerable to obstructions and thus likely results in link interruption. While the application of cooperative technology to solve link blockage problemin 60GHz system should consider the characteristic of directional transmission for 60GHz signal. Therefore in this paper a system is proposed to solve the link blockage problem in 60GHz NLOS communication environment based on the concept of cooperation and also the beamforming technology, which is the basis of directional transmission for 60GHz communication system. The process of anti-blockage solution with cooperative communication is presented in detail, and the fast switching and recovery schemes are well designed. The theoretical values of symbol error rate (SER) using decode and forward (DF) cooperation and amplify and forward (AF) cooperation are presented respectively when the common channel interference exists. Simulation results demonstrate that the performance based on DF cooperation is better than the performance based on AF cooperation when directional transmission is used.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.65-72
• /
• 2010

In this study, the performances of a medium grade IMU which is aimed for Mobile Mapping System and a low grade IMU for pedestrian navigation are analyzed through simulations under GPS signal blockage. In addition, an analysis on the accuracy improvement of barometer, electronic compass, or multi-sensor(combination of barometer and electronic compass) to correct medium grade or low grade IMU errors in the situation of GPS signal blockage is performed. With the medium grade IMU, the three dimensional positioning error from INS exceeds the demanded accuracy of 5m when the block time is over 30 seconds. When we correct IMU with barometer, compass, or multi-sensor, however, the demanded accuracy is maintained up to 60 seconds. In addition, barometer is more effective than the electronic compass when they are combined. In case of low grade IMU like MEMS IMU, the three dimensional positioning error from INS exceeds the demanded accuracy of 20m when the block time is over 15 seconds. When we correct INS with barometer, compass, or multi-sensor, however, the demanded accuracy is maintained up to 15 seconds in simulation results. On the contrary to medium grade IMU, electronic compass is more effective than the barometer in case of low velocity such as pedestrian navigation. It is expected that the analysis suggested a method to decrease position or attitude error using aided sensor integration when MMS or pedestrian navigation is operated under 1he environment of GPS signal blockage.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.745-751
• /
• 2008

This paper presents a framework for GPS/INS/Vision based navigation system of helicopters. GPS/INS coupled algorithm has weak points such as GPS blockage and jamming, while the helicopter is a speedy and high dynamical vehicle amenable to lose the GPS signal. In case of the vision sensor, it is not affected by signal jamming and also navigation error is not accumulated. So, we have implemented an GPS/INS/Vision aided navigation system providing the robust localization suitable for helicopters operating in various environments. The core algorithm is the vision based simultaneous localization and mapping (SLAM) technique. For the verification of the SLAM algorithm, we performed flight tests. From the tests, we confirm the developed system is robust enough under the GPS blockage. The system design, software algorithm, and flight test results are described.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.502-509
• /
• 2011

It is necessary to resolve integer ambiguity in GPS carrier based precise positioning. If there is no signal blockage or cycle slip, the integer ambiguity does not changed. however, signal blockage and cycle slip occur frequently under real operational environment. under this situation, integer ambiguity maintenance is indispensable for continuity of navigation information. In this paper, a cycle slip free technique is proposed for simplifying integer ambiguity maintenance procedure. this technique tested with simulated carrier phase signal with cycle slip aided intentionally. As a result, the proposed technique can give navigation information continuously even if cycle slip is occured.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.717-720
• /
• 2020

An indoor localization system that uses Wi-Fi RSSI signals for localization gives accurate user position results. The conventional Wi-Fi RSSI signal based localization system uses raw RSSI signals from access points (APs) to estimate the user position. However, the RSSI values of a particular location are usually not stable due to the signal propagation in the indoor environments. To reduce the RSSI signal fluctuations, shadow fading, multipath effects and the blockage of Wi-Fi RSSI signals, we propose a Wi-Fi localization system that utilizes the advantages of Wi-Fi RSSI heat maps. The proposed localization system uses a regression model with deep convolutional neural networks (DCNNs) and gives accurate user position results for indoor localization. The experiment results demonstrate the superior performance of the proposed localization system for indoor localization.