• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.463-472
• /
• 1997

A mesoporous molecular sieve, MCM-41, was synthesized and the effent of various initial pH of reaction mixtures on the synthesis and physical properties of MCM-41 was investigated. Adjustment of initial pH for reaction mixtures was made before starting hydrothermal reaction rather than during the reaction. Highly crystalline MCM-41 which shows pore diameters of $30{\AA}$ to $40{\AA}$ and specific surface areas greater than $1000m^2/g$ has been successfully prepared through a single adjustment of initial pH. Results also suggest that the initial pH adjustment has a significant effect on the formation of MCM-41 with a long-range ordered hexagonal array and an excellent thermal stability. Finally, it is speculated that the adjustment of initial pH might accelerate the dissolution of stable polymeric sodium silicate to highly reactive monomeric sodium silicate resulting in well-ordered MCM-41.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.691-696
• /
• 2011

CTAB or CTAB-Nafion catalyst were successfully supported on siliceous hollow tubular MCM-41 which synthesized by hydrothermal method using CTAB as a single template or CTAB and Nafion-Na as mixed templates. The properties of two kinds of catalysts were characterized with XRD, SEM and adsorption and desorption isotherms of nitrogen and pore diameter distribution, respectively. Then they were applied to catalyze brominating reaction of 1,7-heptanediol, moreover the rate of brominating reaction with different catalysts was compared. The results showed that catalytic activities of CTAB/MCM-41 and CTAB-Nafion/MCM-41 are better than CTAB, and that of CTAB-Nafion/MCM-41 is the best because of its phase-transfer and strong acidity function. The two kinds of catalysts can be separated from the reactive products and recycled.

• Applied Chemistry for Engineering
• /
• v.33 no.5
• /
• pp.488-495
• /
• 2022

Activated carbon (AC) and carbon molecular sieve (CMS) have attracted attention as porous materials for recovery and separation of greenhouse gases. The carbon molecular sieve having uniform pores is used for collecting and separating gases because it may selectively adsorb a specific gas. The size and uniformity of pores determine the performance of the CMS, and chemical vapor deposition (CVD) is widely used to coat the surface with a predetermined thickness in order to control the CMS's micropores. This CVD method can be used to control the size of pores in CMS manufacturing, but it must be optimized because of its various experimental variables. Therefore, in order to produce AC and CMS for gas adsorption and separation, this review focuses on various activation processes and pore control technologies by CVD and surface treatment.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.204-210
• /
• 1997

Zeolite 4A-impregnated complex molecular sieve was prepared by hydrothermal reaction after aluminosilicate gel was penetrated into the pore of activated carbon granule. The crystals of zeolite 4A mainly were formed in the macropore of activated carbon, and their average diameter is $0.8{\mu}m$. The pore volume of activated carbon granule is $0.67m{\ell}/g$, and the pore volume of the sample including 21.6wt% of zeolite 4A crystal is $0.41m{\ell}/g$ decreasing the pore volume by 40% due to the crystallization of zeolite 4A crystals on the internal surface of activated carbon. The calcium ion exchange capacity of zeolite 4A-impregnated sample is 320mg $CaCO_3/g$ zeolite, and this value is almost the same as that of zeolite 4A powder. The crystal of zeolite 4A was not separated from the support of activated carbon granule in the course of ultrasonic dispersion. The adsorption isotherm of water on zeolite 4A-impregnated sample shows the intermediate shape between types, I and III. In addition, zeolite 4A-impregnated sample shows the hydrophilic and hydrophobic properties simultaneously.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.6
• /
• pp.325-331
• /
• 2017

Adsorption experiments of carbon dioxide were performed on ZSM5 and Molecular Sieve 13X (MS13X) impregnated with Monoethanol Amine (MEA). Adsorption efficiency of $CO_2$ was investigated in a U type packed column with GC/TCD. The adsorption capacities of adsorbents are estimated in the temperature range of $30-80^{\circ}C$. The modified adsorbents was characterized by BET surface area, $N_2$ adsorption/desorption isotherms, X-ray diffraction and FT-IR. Surface analysis results showed that the impregnation method did not affect the crystallinity of any adsorbents. BET surface area of the MS13X impregnated amine decreased to $19.945m^2/g$ from $718.335m^2/g$. These reults showed that amine molecules were filled with the pore volume in MS13X, as a results restricting access of nitrogen into the pores. The MEA modified MS13X showed improvement in $CO_2$ adsorption capacity over the ZSM5 impregnated with MEA. The MS13X-MEA showed the highest adsorption capacity due to physical adsorption and chemical adsorption by amino-group content. This results also showed that adsorption capacity of MS13X-MEA increases with the temperature range of $60-80^{\circ}C$ compared with pristine MS13X.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.141-143
• /
• 2011

Al-SBA-1(Si/Al = 40, 80 and 120) and Al,Mg-SBA-1 (Si/(Al+Mg) = 40 and 80) molecular sieves were synthesized and characterized. Acetalization of n-heptanal with methanol was studied under autogenous pressure between 80 and $150^{\circ}C$. Since protonation of n-heptanal was fast, addition of methanol to the same to formed hemiacetal slowly whereas conversion of hemiacetal to acetal was fast. The catalysts exhibited nearly similar conversion irrespective of their difference in acidity, and all of them showed more than 80 % conversion either at 80 or $100^{\circ}C$. Hence it is evident that the difference in acidity is not so important in differentiating the activity of the catalysts. The large pore size and hydrophilic and hydrophobic properties are suggested to be the main factors that control acetalization.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.675-682
• /
• 2005

Al containing mesoporous molecular sieve (Al-MMS) was synthesized by hydrolysis of $H_2SiF_6$ and $Al(NO_3)_3{\cdot}9H_2O$. The material obtained was characterized by XRD, $N_2$-physisorption. The specific surface area was $981m^2/g$, and the average pore size was uniformity $39{\AA}$. It was confirmed that the acidity of Al-MMS was milder than that of zeolite Y based on the results of $NH_3$-TPD. Active materials, Pt and Pd, were loaded on Al-MMS in order to examine the feasibility of using Al-MMS as a catalyst support in the hydrogenation of aromatic compounds included in the residue oil of a naphtha cracker. The hydrogenation activity of PtPd/Al-MMS has been studied by following the kinetics of the hydrogenation of naphthalene, and by comparing the kinetic parameters obtained with Pt and Pd catalysts supported on the other mesoporous material support and commercial conventional support materials. PtPd/Al-MMS catalyst shows the highest activity of hydrogenation and sulfur resistance. The high activity of PtPd/Al-MMS was confirmed again in the hydrogenation of PGO (pyrolized gas oil), which is residue oil obtained from a naphtha cracker. Therefore, PtPd/Al-MMS can be applied to the hydrogenation of aromatic compounds included in the residue oil of a commercial naphtha cracker commericially.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.122-126
• /
• 2018

Mesoporous molecular sieves were prepared by the reaction of $Na_2SiO_3$ and $H_2SiF_6$ using nonionic micelle templates in an aqueous solution. Well-crystalline mesoporous molecular sieves were obtained after several seconds at atmospheric conditions. Powder samples exhibited d-spacing of 3.8-5.1 nm with the sharpness of the d00l peak, showing well-crystalline mesoporous molecular sieves, pore size distributions of 2.5-3.1 nm and large specific surface areas of $290-1,018m^2/g$, depending on types of surfactants. SEM images of samples showed well-divided spherical particles with an uniform size of ${\sim}0.5{\mu}m$ and TEM images demonstrated uniform pores with a worm hole shape.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.3
• /
• pp.313-316
• /
• 2000

Three Holstein steers, fitted with ruminal and duodenal cannulas, were used in a replicated $3{\times}3$ Latin square design to determine the digestibility of dietary nitrogen in total digestive tract by three methods, 1) mobile nylon bag (MNB); 2) total fecal collection (TFC); and 3) washed fecal sample after freezing and thawing through a sieve with a pore size of $45{\mu}m$ (WFS). A basal diet of oaten hay-barley was supplemented with one of the following protein sources; soybean meal, fish meal or blood meal. Steers were fed at a level of 2% of body weight. The experimental diets were contained approximately 1.85% nitrogen. There were no differences (p>0.05) among the diets on DM, NDF and nitrogen disappearances, and the diet results were pooled to assess the methods. Total tract disappearances of dry matter and neutral detergent fiber were 61.6, 71.1 and 78.9 and 25.3, 63.2 and 64.6 for MNB, TFC and WFS methods, respectively. The lower digestibility of DM and NDF in the MNB method could be a result of low ruminal incubation time. The TFC method had the lower (p<0.05) determination of nitrogen disappearance in the total digestive tract than the MNB and WFS methods. On the other hand, nitrogen disappearance in the total digestive tract determined by the WFS technique was comparable to that in MNB technique, as there was no significant difference (p>0.05) between the methods. It is shown that the disappearance of dietary nitrogen in the total digestive tract could be estimated in the intact animals by using washed fecal sample prior to freezing and thawing.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.687-693
• /
• 2004

Composite membranes with a titania layer were prepared by soaking-rolling method with the titania sol of nanoparticles formed in the sol-gel process and investigated regarding the vapor permeation of various organic mixtures. The support modification was conducted by pressing $SiO_2$ xerogel of 500 nm in particle size under 10 MPa on the surface of a porous stainless steel (SUS) substrate and designed the multi-layered structure by coating the intermediate layer of ${\gamma}-Al_2O_3$. Microstructure of titania membrane was affected by heat-treatment and synthesis conditions of precursor sol, and titania formed at calcination temperature of 300$^{\circ}C$ with sol of [$H^+$]/[TIP]=0.3 possessed surface area of 210 $m^2$/g, average pore size of 1.25 nm. The titania composite membrane showed high $H_2/N_2$ selectivity and water/ethanol selectivity as 25-30 and 50-100, respectively. As a result of vapor permeation for water-alcohol and alcohol-alcohol mixture, titania composite membrane showed water-permselective and molecular-sieve permeation behavior. However, water/methanol selectivity of the membrane was very low because of chemical affinity of permeants for the membrane by similar physicochemical properties of water and methanol.