• Journal of computational fluids engineering
• /
• v.15 no.2
• /
• pp.62-70
• /
• 2010

Secondary instability in the flow past two square cylinders in side-by-side arrangements is numerically studied by using a Floquet analysis. The distance between the neighboring faces of the two cylinders (G) is the key parameter which affects the secondary instability under consideration. In this paper, we present the critical Reynolds number for the secondary instability and the corresponding spanwise wave number of the most unstable (or least stable) wave for each G. Our results would shed light on a complete understanding of the onset of secondary instability in the presence of two side-by-side square cylinders.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1754-1759
• /
• 2003

Two-dimensional flow over a pair of circular cylinders in side-by-side arrangements at low Reynolds numbers has been numerically investigated in this study. Numerical simulations are performed, using the immersed boundary method, in the ranges of $40{\leq}Re{\leq}160$ and $g^{\ast}<5$, where Re and $g^{\ast}$ are, respectively, the Reynolds number and the spacing between the two cylinder surfaces divided by the cylinder diameter. Results show that total six kinds of wake patterns are observed over the ranges: antiphase-synchronized, inphase-synchronized, flip-flopping, single bluff-body, deflected, and steady wake patterns. It is found that the characteristics of the flow significantly depends both on the Reynolds number and gap spacing, with the latter much stronger than the former. Instantaneous flow fields, time traces, flow statistics and so on are presented to identify the wake patterns and then to understand the underlying mechanism. It is remarkable that, for the deflected wake pattern, the gap flow is deflected invariably to the cylinder of higher drag coefficient and the deflection way does not change at all. Moreover, the bifurcation phenomena where either of two wake patterns can occur are found at certain flow conditions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.1
• /
• pp.49-56
• /
• 2003

The hydrodynamic interference between two circular cylinders in tandem and side by side arrangements was investigated by measuring of lift and drag on each cylinder. The time variations of interference lift and drag coefficients in each arrangement were observed at center-to-center pitch ratios of P/D=1.25 and 2.5 and Reynolds number of $Re=1.5\times10^4$. Average interference lift and drag coefficients were also observed at pitch ratios from P/D=1.25 to 2.5 and Reynolds number from $Re=1.5\times10^4$ to $1.5\times10^4$. The hydrodynamic interference between two circular cylinders differed with the shape of the arrangement and the pitch ratio, but the characteristics were revealed by measuring of lift and drag on each cylinder.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.1
• /
• pp.55-60
• /
• 2012

This experimental study investigated the characteristics of flow-induced vibration of two elastically supported circular cylinders in a side-by-side arrangement. In particular, the characteristics of the flow-induced vibration of the two cylinders are investigated by changing the flow speed at each spacing ratio L/D (L is the space between two cylinders and D is the diameter of the cylinder). To clarify the mechanism generating the flow-induced vibration of the cylinders, the flow patterns around the two vibrating cylinders are also investigated using a flow visualization test that reproduces the flow-induced vibration of the cylinders with a forced vibration apparatus. As a result, it is clarified that the flow-induced vibration characteristics of the two cylinders arranged side-by-side switch among four patterns as the flow between the two cylinders is switched. Among the three arrangements considered (tandem, staggered, and side-by-side), the arrangement that generates flow-induced vibration of the two cylinders most easily is the side-by-side arrangement.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1985.10a
• /
• pp.37-42
• /
• 1985

The errors caused by developmental finite difference approximations in the two microphone acoustic intensity measurement technique are considered in this paper. The frequencies and pressure responses obtained experimentally, are presented for both face to face (FF) and side by side(SS) microphone configurations. The implications of these results by the use of such a cofiguration for two microphone sound intensity measurement are discussed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.131-136
• /
• 2008

The characteristics of the flowfields around two circular cylinders in various arrangements were investigated by PIV. In tandem arrangement, the Strouhal numbers measured in the rear region of the cylinder of wake side were decreased with the space ratios, the flow between two cylinders was almost stagnated and the closer to upstream cylinder, the larger the width of the stagnated region was. The direction of vortex between two cylinders was opposed each other with the small difference(${\alpha}$=${\pm}1.0^{\circ}$) of the attack angle . In side by side arrangement, the flow velocity between two circular cylinders were increased with the space ratios.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.4
• /
• pp.359-366
• /
• 2013

This study aims to investigate the characteristics of the flow-induced vibrations of two circular cylinders. The characteristics of the flow-induced vibrations are examined for various flow velocities and spaces between the two cylinders when they are arranged in tandem, staggered, and side-by-side positions. The results are as follows: (i) Seven flow-induced vibration patterns are observed when the two circular cylinders are placed in either tandem, staggered, or side-by-side positions. (ii) The two cylinders induce a vibration because they affect each other. (iii) The easiest way to induce a vibration of the two cylinders is by placing them in the side-by-side position among the three arrangements (tandem, staggered, and side-by-side). (iv) The change in the maximum flow-induced vibration of the two cylinders depends strongly on the fluctuating lift forces of each of them.

• Journal of the Korean housing association
• /
• v.22 no.2
• /
• pp.91-99
• /
• 2011

The purpose of this study is to clarify the transitional process of spatial configuration of 'Topdong Yangdalmal'; One of the existing 22 old settlements in cheongju city. The results are as follows. 1) Side roads are derived from Inner road until 1970, so large-scale lots are subdivided small-scale lots. The houses are mostly in 1970s and 1980s. The existing old houses are 11, their orientation are East South, and the entrance gives on side road. The orientation, court yard, and entrance of the houses nearby side roads keep ongoing, in spite of alteration and extension. Especially, Entrance is changed by the new arterial roads and subdivided lots, but, the houses nearby side roads are continued as in the past. 2) The newly built houses in 1970's are 20, and it's arrangements are equal to existing old one. The orientation of houses after 1980's is the same in 1970's. But, the entrance is changed by subdivided lots, and the size of the court yard are reduced or disappeared. In other hand, the houses as the same size of the existing houses, and Storyincrease continue court yard as in the past. Therefore, the houses which are nearby inner road, and increase story, are continued, in spite of the newly built one.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.4
• /
• pp.266-273
• /
• 2017

In recent years, LNG bunkering terminals are needed to supply LNG as fuel to meet the emission requirements of the International Maritime Organization (IMO). A floating LNG bunkering terminal (FLBT) is one of the most cost-effective and environmentally friendly LNG bunkering systems for storing LNG and transferring it directly to an LNG fuel vessel. The FLBT maintains its position using mooring systems such as spread mooring and turret mooring. The loads on the vessel and mooring lines must be carefully determined to maintain their positions within the operable area. In this study, the wind loads acting in several side-by-side arrangements on the FLBT and LNG-BS were estimated using wind tunnel tests in the Force Technology, and the shielding effect due to the presence of ships upstream was evaluated. In addition, the empirical formulations proposed by Fujiwara et al. (2012) were used to estimate the wind force coefficients acting on the FLBT and those results were compared with experimental results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.9 s.240
• /
• pp.1032-1041
• /
• 2005

This study is performed to investigate the heat transfer characteristics of heat exchanger according to the arrangement of fins as well as fin configuration by using the four times enlarged model. Friction factor, Colburn j factor and goodness factors are compared to each other to estimate performance of each case for 4 different kinds of fins, which are plain, single side slit, double side slit and louver fin. Results show that heat transfer would be altered by fin arrangement and that friction loss is more affected by fin configurations than by the fin arrangements. In particular, heat transfer depends more on the shape of front row than that of rear row. The heat transfer rate of combined fin arrangement increases a lot more under the same pressure drop than that of conventional fin arrangement. This indicates that the heat exchanger of higher efficiency would be designed by the proper combination of fins, of different shapes.