• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.1 s.120
• /
• pp.1-8
• /
• 2007

The purpose of this study is to suggest the minimum distance needed between landscape trees and apartment buildings. in order for the trees to grow soundly and maintain constant growth. Therefore, this study investigated and analyzed the present conditions of the green-spaces contiguous to apartment buildings and the trees inside the apartment complex. The following general problems were identified : (1) the tree growth conditions, (2) the planting intervals, and (3) the planting methods in the apartment complexes. The method of this study was to survey areas, measure the trees and analyze the results. Ten apartment complexes located in Seoul were randomly selected for this study. To analyze the greens contiguous to the building of each apartment complex, the greens were divided into three types, including the front greens, the side greens, and the rear greens. The study surveyed the width of all contiguous greens and the distance from trees to my given building. Four representative sites were specifically investigated to measure the crown widths, heights, and diameters of the trees. These investigations were carried out over 3 months from August to December 2006. According to the results of the study, it was found that the greens are narrower in width and the more closer to a building. The study identified a correlation between the tree and the passage of time after the completion of construction of an apartment complex, showing that the malformation of the trees worsened as time passed. As a result of measuring the right crown and left crown width with the tree trunk as the center, a broad difference was found between coniform trees and trees that tend to branch out more. For example, the ratio of the width of the Acer palmatum is 1:6. However, the ratio of the Metasequoia glyptostroboide is 1:1.7. Based on the overall analysis, it was concluded that the maintained minimum width must be greater than one meter over the green space according to the 'Landscape Standard 2000'. However, that is only applicable to cases such as apartment buildings that present no obstacles. In conclusion having greens placed within one meter of width to a building is not an appropriate environment for the healthy growth of trees. To create sound green spaces, sustainable, long-term growth rate and size should be considered. It is necessary to prepare new standards for the computation of planting trees and the measurement of square landscapes. Wall greenery and shrubberies could be an alternative in the case of a narrow-width green space.

• Tunnel and Underground Space
• /
• v.28 no.5
• /
• pp.442-456
• /
• 2018

Scaled model tests were performed to evaluate the reinforcement effect of rock bolts in anisotropic rock mass. For this purpose, two tunnel cases were experimented which had different tunnel sizes, rock strengths, anisotropic angles and coefficients of lateral pressure. The fully grouted rock bolts of the D25 deformed bar were modeled as the basting pins with bead and were systematically installed at the roof and the side wall of the model tunnel. As results of the first case experimentations, the unsupported model showed initial crack at the roof of tunnel, but the supported model with rock bolts showed initial crack at the floor of tunnel where rock bolts were not installed. The crack initiating pressure and the maximum pressure of the supported model with rock bolts were 11% and 7% larger than those of the unsupported model, respectively. Moreover, the effect of the existing discontinuities in anisotropic rock mass on the fracture behavior of tunnel was reduced in the supported model, and so the reinforcement effect of rock bolt turned out to be experimentally verified. As results of the second case experimentations considering different support patterns, the crack initiating pressures of models were larger and the reduction ratios of tunnel area according to applied load were smaller as the length and the quantity of rock bolts were larger. Therefore, it was found that the performance of the rock bolts turned out to be improved as they were larger.

• Journal of the Korean Society of Costume
• /
• v.51 no.2
• /
• pp.149-167
• /
• 2001

Today, every culture has taken on the compromise form by means of the cultural difference, variety, and pluralism according to the internationalization and the advance so that it has been developed toward the half-blooded and multilayered the aspect. In accordance with this current of the times, this thesis observed the feminism found in the multiculturism of the end of the 20th century, the third world, and technology with the side of the tendency of modern fashion, considered the hybride phenomenon which is pulling down the wall between culture and genre due to the social diversification. and predicted the fashion trend do 21st century serf on it. Multiculturism is the movement that began to arise in the academic world of America and the literary world form the close of 1980's in accepting the variety of culture and regarding the culture with the more balanced and wide view and just as it is, it means the attitude of accepting one or more cultures of variely and the position of taking interest in the culture of minority race not the culture of a governing race. It is the fashion of feminism adapts dualism like unisex, androgynous look, etc of bisexual lendency in the 1980's, it shows new style with crossover of liberal sense because there is not the difference of sex in fashion. The eco-feminism pursues the natural sexuality not being instrumental and dismantling and expressed it in the Gender expression of an integrated human being. The trend of ethnic fashion in the close of 20th century is that the element of hippie is working so strongly. By adding embroidery of Oriental style, accessories of Indian style, feathers, beads, a hempen hood to the ethnic costumes of Asia and Latin, is shows the figure of ethnic hippie. As the cycler fashion is the future clothes through technology of computer, it uses a cool glass material bringing up the image of a spacesuit in order to expresses cyber image through artificial color combination of sheen colors, Though this techno-color fashion has established the fresh stimulation and the innovative aspect with ultramodern materials and image of futurism, it transmits a hope of estranged people and the natural elements. Hybride means a cross and mixture of animal and plant in Korean and is also called fusion. The phenomenon of hybrid predicts to comes the period of a cross and variation because something completely new comes into the world by contamination, mixture and compromise through meeting something different each other and it has on advantage of developing something existing to one more stage. It is prospected that in the society of 21st century, the borderline of traditional gender will be disappeared, variety and individuality will determine the individual behavior, and the masculine value will be substituted by feminine value. In the society giving priority to feminine value, a fashion stuck closely to women is what must reflect lives of woman under the proposition of woman's beauty, being on original function. So, it is considered that a fashion with added convenience and practicality having the function which is easy to put on, comfortable to act, able to express solves so much, and able to show various appearances according to T.P.O will get into the spotlight.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.425-436
• /
• 2016

The Yakhyeon catholic church (Historic Site No. 252 in Korea) that was constructed in 1892 has been the first western brick structure to ever have existed and one of the most important historical materials in the Korean modern architecture. After a fire had broken out at the catholic church in 1998, the stained glass on the back wall, the slab glass (dalle de verre) introduced by Lee Nam Guy in 1974, was repaired in 1999 because of singe scorch and water leakage. An analysis of the coloration elements showed that yellow, red and green included Zn, K and Cd, respectively. The glass of red contained Se, dark green contained Mn and Cr, and blue contained Pb and S. According to material analysis, the masonry joint was identified dolomite ($CaMg(CO_3)_2$) and calcite ($CaCO_3$), which was observed plate, columnar, rhombic and square of crystalline particles. Meanwhile, ultrasonic velocity in the stained glass recorded low speed in the middle and lower right of the window (an average of 4,130 m/s). And the joint was measured the lowest physical properties of the top left and middle of the window (an average of 2,053 m/s). This study have showed that extensive physical damage was founded to the left and middle rather than the right side. In this respect, more research in needed to conserve the correlation between color and physical properties.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.3
• /
• pp.175-184
• /
• 2002

Ground reaction curve is very useful information for estimating the installation time of the tunnel support. The ground reaction curve can be estimated by analytical closed form solutions derived in case of circular section and isotropic stress condition. The nature of the ground reaction, however, depends significantly on tunnel configurations. Nevertheless, few purely analytical and experimental studies of this problem due to tunnel configurations appear to have been carried out. Therefore, it is necessary to investigate the influence of tunnel configurations in order to use simply in practical design. This paper describes a numerical study for the intial elastic displacement in the ground reaction curve due to configuration of tunnel excavation. In order to evaluate the applicability of analytical closed form solution in practical design, the parametric studies were carried out by numerical analysis in elastic tunnel behaviour. In the studies, S value, namely configuration factor, defined as the ratio between tunnel height (b) and width (a), varies between 0.5 and 3.0, initial ground vertical stress varies between 5~30 MPa for each S values. The results indicated that the self-supportability of ground is larger in the ground having low S value. It, however, is suggested that the applicability of closed form solution may not be adequate to determine directly the installation time of the support and self-supportability of ground. It should be necessary to perform the additional numerical analysis.

• Journal of Gastric Cancer
• /
• v.2 no.1
• /
• pp.26-28
• /
• 2002

Carcinomas of the stomach can spread to adjacent structure by local extension or metastasize to lymph nodes, peritoneum and distant organs. However, the incidence of metastatic bladder cancer originated at the stomach is very rare. A fifty-five year-old man admitted complaining of epigastric pain for 2 months. A large ulceroinfiltrative lesion was seen in the low body, which was confirmed poorly differentiated adenocarcinoma by histological examination. Abdominopelvic CT scan showed wall thickening at the greater curvature side of gastric body and urinary bladder. Urine cytology was negative. By transurethral resection of bladder, he was diagnosed as metastatic adenocarcinoma of the bladder. We report a case of stomach cancer with metastasis to urinry bladder.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.230-237
• /
• 2011

In this study, the characteristic of fluid flow in the new type lung assist devices has been established using computational fluid dynamics(CFD). For the modeling, the hollow fiber was ignored, and vertical types and tangential types were used for the model. Which was to analyze the flow characteristics of the fluid flow model when there exists 1 and 2 input/output ports, and when the input/output ports is located at the center of the cylinder and at the tangential direction with the cylinder wall. The modeling results showed that it was possible to eliminate no-flow region(stagnant layer) as shown in the vertical type when an inlet and an outlet were installed on the tangential direction of the cylinder as shown in the tangential type. Also, in the tangential type, vortex-type flow appeared as dominant, and it showed a complicated flow not deviated to one side. When the number of input/output was two, there was no deviated flow, and complicated flows were generated all across the tube. From the test result, it was found that input/output of flow was tangential type and complicated flows with no stagnant layer would be generated when there are two inputs/outputs, respectively.

• Archives of Craniofacial Surgery
• /
• v.17 no.4
• /
• pp.190-197
• /
• 2016

Background: The cheek rotation flap has sufficient blood flow and large flap size and it is also flexible and easy to manipulate. It has been used for reconstruction of defects on cheek, lower eyelid, or medial and lateral canthus. For the large defects on central nose, paramedian forehead flap has been used, but patients were reluctant despite the remaining same skin tone on damaged area because of remaining scars on forehead. However, the cheek flap is cosmetically superior as it uses the adjacent large flap. Thus, the study aims to demonstrate its versatility with clinical practices. Methods: This is retrospective case study on 38 patients who removed facial masses and reconstructed by the cheek rotation flap from 2008 to 2015. It consists of defects on cheek (16), lower eyelid (12), nose (3), medial canthus (3), lateral canthus (2), and preauricle (2). Buccal mucosa was used for the reconstruction of eyelid conjunctiva, and skin graft was processed for nasal mucosa reconstruction. Results: The average defect size was $6.4cm^2$, and the average flap size was $47.3cm^2$. Every flap recovered without complications such as abnormal slant, entropion or ectropion in lower eyelid, but revision surgery required in three cases of nasal side wall reconstruction due to the occurrence of dog ear on nasolabial sulcus. Conclusion: The cheek rotation flap can be applicable instead of paramedian forehead flap for the large nasal sidewall defect reconstruction as well as former medial and lateral canthal defect reconstruction.

• Journal of the Korean Society of Costume
• /
• v.55 no.5 s.95
• /
• pp.78-86
• /
• 2005

Marek(말액) is the headgear, which is a form of hempen hoods[Geon(건)] and the origin of it is Pa(파) of band form. A history book of an old Chinese country Post-Han $\ll$ History of HouHan (후한서)$\gg$ had recorded that a soldier wore a red band around his head that was called Pa(파). In the Han dynasty(한대), Pa had been transformed into Chaek(책) or a kind of a hemp rap(건) while e headgear had still remained as the band form and called Marek from e Tang era(당). The literatures of the Tang era had referred the red Marek of soldiers, and other literatures of the later period had recorded that of the previous headgears of the band form were related with Marek. Since the Tang era, white or yellow Marek except red one fer soldiers had been were by soldiers, musicians, dancers and singers in Yuan(원) and Ming(명) of China. The colors was recorded in red on documents mostly, this red implicated soldiers for symbol of terror. This fart was documented in an old history book $\ll$The history of 25 Eras(이십오사)$\gg$, On the other side, a wall painting in Princess Jeonghyo(정효공주)'s tomb of the Parhae(발해) period described the portraits of twelve persons, and among them, two Siwui(시위) put on the red Marek. Quoted from the record of a history book of the Tang era system , a history book of Three Kingdoms(삼국시대) of ancient Korea $\ll$Samguksaki(삼국사기)$\gg$ described that four dancers of Kogryo(고구려) wore Marek on their heads with the costumes of Koguryo, one of those Kingdoms. In consideration that the book of $\ll$Tongjun$\gg$ was the literature of the Tang era so that Marek mentioned in this book was followed by their name, the Marek of Koguryo dancers shown in the history book $\ll$Samguksaki(삼국사기)$\gg$ might be a kind of Koguryo style hemp cap[Geon(건)]. The Marek of Parhae had succeeded to the headgear of Koguryo and the identity was on Koguryo.

• Fire Science and Engineering
• /
• v.24 no.5
• /
• pp.32-38
• /
• 2010

Multi-dimensional fire dynamics were studied numerically with the change in ventilation conditions in a full-scale ISO 9705 room. Fire Dynamic Simulator (FDS) was used for the identical conditions conducted in previous experiments. Flow rate and doorway width were changed to create over-ventilated fire (OVF) and under-ventilated fire (UVF). From the numerical simulation, it was found that the internal flow pattern rotated in the opposite direction for the UVF relative to the OVF so that a portion of products recirculated to the inside of compartment. Significant change in flow pattern with ventilation conditions may affect changes in the complex process of CO and soot formation inside the compartment due to increase in the residence time of high-temperature products. The fire behavior in the UVF created complex 3D characteristics of species distribution as well as thermal and flow structures. In particular, additional burning near the side wall inside the compartment significantly affected the flow pattern and CO production. The distribution of CO inside the compartment was explained with 3D $O_2$ distribution and flow patterns. It was observed that gas sampling at local positions in the upper layer were insufficient to completely characterize the internal structure of the compartment fire.