• The Journal of the Acoustical Society of Korea
• /
• v.32 no.2
• /
• pp.181-189
• /
• 2013

The purpose of the present study is to investigate the effect of cortical bone on acoustic properties of trabecular bone, such as speed of sound (SOS) and normalized broadband ultrasound attenuation (nBUA), in bovine femur in vitro. Twelve trabecular bone samples and three cortical bone plates with thicknesses of 1.00, 1.47, and 2.00 mm were extracted from the proximal end of two bovine femurs. The correlations between acoustic properties and trabecular apparent bone density were also examined before and after attaching a cortical bone plate to the trabecular bone samples. SOS increased linearly with increasing thickness of the cortical plate attached to one side of ultrasonic incidence of the trabecular bone samples, whereas nBUA showed a nonlinear dependence on the thickness of the cortical plate. All the SOS (r = 0.95-0.97) and nBUA (r = 0.53-0.73) measurements with and without the cortical bone plate with various thicknesses were found to exhibit high correlations with the trabecular apparent bone density. These results imply that the acoustic properties measured in the femur with lateral cortical layers in vitro can be useful indices for the prediction of trabecular bone mineral density.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.15-24
• /
• 2004

The Seokgatap pagoda composed of mainly alkali granite and other minor pink-feldspar granite, fine-grained granite, granodiorite, diorite, gabbro, and tuff. Despite the small loss and damage derived from joints, its peel-off and exfoliation are serious enough to cause the heavy deterioration on the stone surface. The chemical and petrological weathering has partly replaced the original rock-forming minerals with clay minerals and iron oxyhydroxides. Based on the petrogenesis, rock materials of the pagoda is very similar to rocks of Dabotap pagoda and the Namsan granite in the Gyeongju. The central fart of the pagoda has sunken highly, which caused all the corners to split and the structural transformation to become worse. The reverse V-shaped gaps between the materials have broken stones filled in a coarse way. The iron plates inserted between the upper flat stone laid on other stones and tile pagoda body in the north and east side has been exposed in the air and corroded, discoloring of the adjacent stones. The overall diagnosis of the Seokgatap pagoda is the deteriorated functions of the stone materials, which calls for a long-term monitoring and plans to reinforce the stone surfaces. But the main body including the pagoda roof stone needs washing on a regular basis, and the many different cracks should be fixed with glue by using the fillers or hardeners designed for stone cultural properties after removing the cement mortar. In case of the replacement of the stone materials with new stones, it's necessary to examine the pagoda for the center of gravity and support intensity of the materials. The structural stability of the pagoda can be attained by taking a reinforce measure in geotechnical engineering and making a drainage. The ground humidity, which has aggravated weathering and structural instability, should be resolved by setting up a humidity reduction facility. The contamination of lichens and bryophyte around the pagoda and on the surface is serious. Thus biochemical treatments should be given too in order to prevent further biological damages and remove the vegetation growing on the discontinuous planes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.461-466
• /
• 2013

This paper examines the characteristics of butt welding joint shrinkage for shipbuilding and marine structures main plate. The shrinkage strain of butt welding joint which is caused by the process of heat input and cooling, results in the difference between dimensions of the actual parent metal and the dimensions of design. This, in turn, leads to poor quality in the production of ship blocks and reworking through period of correction brings about impediment on improvement of productivity. Through experiments on butt welding joint's shrinkage strain on large structures main plate, the deformation of welding residual stress in the form of I, Y, V was obtained. In addition, the results of experiments indicate that there is limited range of shrinkage in the range of 1 ~ 2 mm in 11t ~ 21.5t thickness and the effect of heat transfer of weld appears to be limited within 1000mm based on one side of seam line so there was limited impact of weight of parent metal on the shrinkage. Finally, it has been learned that Shrinkage margin needs to be applied differently based on groove phenomenon in the design phase in order to minimize shrinkage.

• Journal of Veterinary Clinics
• /
• v.31 no.6
• /
• pp.523-526
• /
• 2014

Three dogs were admitted for repair of bone fracture. Case 1 (Maltese, 1.8 kg, intact female, 5-month-old) and case 2 (poodle, 3.0 kg, intact female, 6-month-old) had non-weight bearing lameness in the left pelvic limb, and case 3 (mixed, 3.3 kg, intact female, age unknown) had non-weight-bearing lameness in the left thoracic limb. On orthopedic examination, there was pain, crepitus, palpable instability and substantial soft tissue swelling on the affected side. No neurological deficits were identified. Radiographs revealed left proximal metaphyseal tibial and fibular fractures in cases 1 and 2, and left proximal metaphyseal radial and ulnar fractures in case 3. All cases had closed long-bone fractures with short juxta-articular fracture segments. Under fluoroscopic guidance, proper placement of the ring fixation elements was confirmed during surgery. Two or three rings were used to stabilize fractures with traditional circular external skeletal fixators (CESF). Postoperative radiographs showed acceptable alignment and apposition of the previously identified fracture. Time to radiographic union ranged from 5 to 14 weeks and there were no signs of implant failure or pin tract infection. Functional outcomes were excellent in all cases. CESF can be successfully used to reduce short juxta-articular fractures in which bone plates or external skeletal fixation cannot be applied.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.207-216
• /
• 2007

The purpose of this study was to biomechanical analysis Judo's Kuzushi throwing motion in order to increase the effectiveness of Nage-waja(throwing technique). The Tori was a Judo player with 18 years experience(4th degree) while the Uke was a player with 2 years experience(1st degree). The kinematic data was captured using the Vicon motion system (7 cameras) and the kinetics were recorded by force plates(2 AMTI). The following were the results; While leaning to the front the subject's trunk's angle was $14.5^{\circ}$, the lower limbs angle was $23.8^{\circ}$, knee angle was $179.6^{\circ}$ and the vertical reaction of the left leg was 325.42N(BW 0.34) and the right leg was 233.7N(BW 0.47). While leaning back the subject's trunk's angle was $11.3^{\circ}$, the lower limbs angle was $4.1^{\circ}$, knee angle was $1761^{\circ}$ and the vertical reaction of the left leg was 299.53N(BW 0.43) and the right leg was 441.7N(BW 0.64). While leaning to the left the subject's trunk's angle was $30.8^{\circ}$, the lower limbs angle was $2.7^{\circ}$, knee angle was $175.2^{\circ}$ and the vertical reaction of the left leg was 711N(BW 1.03) and the right leg was 9.2N(BW 0.01). While leaning to the right the subject's trunk's angle was $36.5^{\circ}$, the lower limbs angle was $10.4^{\circ}$, knee angle was $175.2^{\circ}$ and the vertical reaction of the left leg was 13.2N(BW 0.02) and the right leg was 694.7N(BW 1.01). While leaning to the left front corner the subject's trunk's angle was $19.8^{\circ}$ (front) and $15.1^{\circ}$ (left), the lower limbs angle was $17.8^{\circ}$ (front) and $2.4^{\circ}$ (left), knee angle was $177.8^{\circ}$ (front) and $173.9^{\circ}$(left), and the vertical reaction of the left leg was 547.4N(BW 0.8) and the right leg was 117.8N(BW 0.17). While leaning to the right front corner the subject's trunk's angle was $15.4^{\circ}$ (front) and $17.7^{\circ}$ (right), the lower limbs angle was $21.1^{\circ}$, (front) and $5.7^{\circ}$ (right), knee angle was $175.5^{\circ}$ (front) and $178.9^{\circ}$(right), and the vertical reaction of the left leg was 53N(BW 0.08) and the right leg was 622.4N(BW 09). While leaning to the left rear corner the subject's trunk's angle was $9.2^{\circ}$ (back) and $13.8^{\circ}$ (left), the lower limbs angle was $2^{\circ}$, (back) and $5.7^{\circ}$ (left), knee angle was $175.5^{\circ}$ (back) and $172.8^{\circ}$(left), and the vertical reaction of the left leg was 698.2N(BW 1.02) and the right leg was 49.6N(BW 0.07). While leaning to the right rear corner the subject's trunk's angle was $8.9^{\circ}$ (back) and $19.6^{\circ}$ (right), the lower limbs angle was ${0.6^{\circ}}_"$ (back) and $3.1^{\circ}$ (right), knee angle was $174.6^{\circ}$ (back) and $175.6^{\circ}$(right), and the vertical reaction of the left leg was 7.2N(BW 0.01) and the right leg was 749.4N(BW 1.09). It was observed that during the Judo motion Kuzushii the range of the COM varied from $26.5{\sim}39.9cm$. It was concluded that the upper body leaned further than the lower body as there was knee extension. There was high left leg reaction forces while leaning to the left and likewise for the right side. It was therefore deduced that the Kuzushi was a more effective throwing technique for the left side.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.1
• /
• pp.59-70
• /
• 2013

This study was to suggest cultural landscape preservation, value creation, as well as utilization plan to help landscape development of Hahoe village by identify the existence of Okyeonsipyeong(玉淵十詠) natural features, which were set around Buyongdae(芙蓉臺) in Hahoe Village by Seoae(西崖) Ryu, Seongryong(柳成龍), and understanding their characteristics and meanings of natural features and meanings. Based on the writings of "Okyeonseodanggi" and "Okyeonsipyeong", the major results of this study are as belows. 'Okyeon(玉淵)' letters carved on the rocks, also known as the name of pavilion in Okyeonjeongsa(玉淵精舍), is the center of Okyeonsipyeong that symbolizes the enlightenment of clean noble man, as well as the symbolic locational expression of studying room. One of Okyeonsipyeong, 'Wansimjae', is assumed to be the name from the combination of two Buddhist names, 'Wanjeok(玩寂)' and 'Seshim(洗心)', 'Dangho(堂號)', lined on both sides with Wonlakjae, the residence of Seoae, as the center. Wansimjae is after all the natural feature indicating the overall Okyeonjeongsa as the core of Okyeonsipyeong with west edge Gyeomamjeongsa(謙巖精舍). Among ten Okyeonsipyeong natural features, Wansimjae(玩心齋), Ganjukmun(看竹門), Gyeomamsa(謙菴舍), Dalgwandae(達觀臺), Ssangsongae(雙松厓), and Dohwacheon (桃花遷) are on the right side of the stairway from Okyeonjeongsa to Gyeomamjeongsa, while Chuwoldam(秋月潭), Neungpadae(凌波臺), Gyeseonam(繫船巖), and Jijuam(砥柱巖) are on the road to the cliff under river cliff in Buyongdae as well as to the dock, and all are located within 500m radius close and diameter area. As the results of lexeme and context analyses of Okyeonsipyeong poet, they are mainly about Confucian teachings symbolizing the constancy of the classical scholar including ego becoming one with the nature and back to the nature, unworldliness and farsighted view, transcendence and seclusion, as well as integrity spirit. In Dohwacheon and Gyeomamsa poets, there is Tao characteristics and brotherhood that pursue fairylands such as Mooreungdowon(武陵桃源). To create tourism brand and landscape of Okyeonsipyeong, it is necessary to prepare storytelling plans including the letters carved on the rocks introduction in Buyongdae area, and also synopsis of the Silgyeongsusang musical, 'Buyongjiae(芙蓉之愛)' that is related to 10 natural features. In addition, the related plans of the experience road from Gyeseonam, which is the boat stop in Buyongdae, to Ganjukmun of Okyeonjeongsa, and again to viewing routes on the stairways to Gyeomamjeongsa using boats are necessary. For preliminary preservation and maintenance plans, the safety of the stairway from Okyeonjeongsa to Gyeomamjeongsa should be secured, the rock inscription should be preserved, landscape interpretation plates should be installed, trees and shrubs around Dohwacheon rock inscription should be removed, Dalgwandae letters carved on the rocks should be restored, and the bamboo forest outside Ganjukmun as well as Prunus persica plantation around Dohwacheon should be pointed out.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.309-323
• /
• 2009

In this study we evaluated the influence of both the thickness of residual enamel and the color of the composite resins applied to lingual surface on the labial surface color. Background plates were made by randomly (A1, A2, A6D, B1, B2, B3, C1, C2, C6D) selected colors of Filtek Supreme (3M ESPE, St. Paul, U.S.A.) composite resin. Crown portion of 9 maxillary central incisors were cut off and embedded with acrylic resin except labial surface. Samples of average thickness of 2.2 mm were obtained after cutting it in a thickness of 2.5 mm from the labial surface and sandpaper polish. The shade of composite resin background was measured using Spectrophotometer ($Spectrolino^{(R)}$, GretagMacbeth, Regensdorf, Switzerland). And CIE $L^{\ast}a^{\ast}b^{\ast}$value of 2.2 mm thickness tooth samples were measured on the 9 composite resin backgrounds. And then, the cutting side of tooth samples was ground to the extent of 1.9 mm, 1.6 mm, 1.3 mm, 1.0 mm and placed on composite resin backgrounds and measured $L^{\ast}a^{\ast}b^{\ast}$values with the same method. In all samples, $L^{\ast}$value and $b^{\ast}$value seemed to have a tendency of decreasing as thickness of tooth sample becomes thinner regardless of background colors (p < 0.05). But, $a^{\ast}$value didn't show the significant differences depending on the thickness.