• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.365-372
• /
• 2017

Squat exercise is one of the important free weight exercises that can safely and effectively expect the athletic performance by establishing the rationale. Therefore, it is necessary to study the side effects caused by incorrect exercise, scientific countermeasures and to develop a exercise estimation model. It is effective and accurate to use a variety of assistive devices to calibrate athletic posture. The issues of the structural analysis for designing a foot plate for squat exercise is to model the behavior by the dynamic behavior. It should be consider that the center of gravity of each segmented body is different when the maximum load is applied. It is applied to complete system design through simulation method with kinematic dynamic, ground reaction force and load analysis for the free weight exercise equipment, VR device, and safety foot plate. In this paper, the authors propose the design method for the vertical load distribution applied in the design of the foot plate used for the squat exercise mechanism, and based on these results, design make the more safe and reliable free weight exercise equipment system.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.5
• /
• pp.123-134
• /
• 2009

Since 1970s, urethane waterproofing method is broadly used in rooftops, underground spaces, and sports stadium for its outstanding ultraviolet blockage, watertightness, and elasticity. However, development of slippage-resistance and endurance, improvement of function considering convenience and visually pleasing of users, urethane waterproofing method is necessary, since rooftops and underground spaces have slippage and external force risks. Therefore, many improved waterproofing methods are being developed and, recently, embo-thane waterproofing method, which applies embo-spray coating system, has been developed. This paper explains exposure, nonexposure, and floor-material of embo-thane waterproofing method, and then perform experimental study for comparison with urethane waterproofing method about tensile strength, coefficient of expansion, performance of bond, anti-abrasion, and slippage-resistance. In addition, the performance index was presented for the superiority of embo-thane waterproofing method compared to urethane by setting up evaluation criteria considering not only physical performance but also design side of embo-thane waterproofing method, and Value Analysis applying AHP. Also for an assessment considering uncertain result, Monte Carlo Simulation Method was used to operate reliability analysis through statistic approach method.

• Journal of Periodontal and Implant Science
• /
• v.31 no.2
• /
• pp.277-285
• /
• 2001

Periodontal disease is characterized by inflammation and subsequent loss and/or damage to tooth-supporting tissues such as bone, cementum,and periodontal ligament. Periodontal ligament and cementum are the key tissues in the initial process of regeneration following periodontal disease. Therefore, studies on cementoblasts, which form cementum are emphasized. It is still unclear which cells cementoblast differentiate from. This study was conducted under the hypothesis that PDL fibroblast can differentiate into either cementoblast or osteoblast depending on the conditions of surrounding tissue. Clinically, with excessive traction force of orthodontic appliances or excessive occlusion hypercementosis is observed, and this has been confirmed histologically. Consequently, activation of cementoblast can be expected in rats when mechanical stimuli are given to PDL fibroblast. Therefore, the purpose of this article is to prove that PDL fibroblast differentiates into cementoblast in rats under mechanical stimuli using histologic and molecular methods. In this study, twenty rats were given hard diet. Ten of them were sacrificed after 1 week, and the others were sacrificed after two weeks. Slides were made from tooth specimen, and they were studied under the microscope. In addition, PDL fibroblast and cementum from the extracted teeth were analyzed with Northern blotting. In histologic examination, as time passed, PDL fibroblast migrated to the dentin side, differentiated into cementoblast, and formed new cementum. In Northern blotting, it was found that mRNA expression of cementoblast-specific proteins such as BSP, OC, OPN, and type I collagen were more prominent in rats sacrificed after 2 weeks of hard-diet than rats sacrificed after 1 week. From these findings we can conclude that PDL fibroblast can differentiate into cementoblast under mechanical stimuli. We think that 'Rat Models' used in this study will be beneficial to future studies regarding cementoblast.

• Journal of Animal Science and Technology
• /
• v.47 no.1
• /
• pp.57-72
• /
• 2005

The present study was undertaken to investigate the effects of nutrient density diets and sex on carcass and pork quality characteristics in finishing pigs. A total of 96 pigs(58.04 $\pm$ 6.85 kg) were divided into 2 groups(gilts and barrows), each sex group was assigned to 3 nutrient density(high : 18.5%, middle : 16.0% and low: 14.0% CP, respectively) and raised up to 1l0kg live weight. Each treatment had four replicates with three or five pigs per replicate. The treatments comprised the feeding regimes of 1) the low density diet for 60 days, 2) the middle nutrient density diet for the 30 days followed by a low nutrient density diet for the remaining 30 days and 3) the high nutrient density diet for the 30 days followed by a middle nutrient density diet for the remaining 30 days. Pigs were conventionally slaughtered, and then chilled overnight. Carcass characteristics and grades were determined on those carcasses, and pork loin muscle was removed from each left side at 5th to 13th rib for quality evaluation were evaluated. There were no differences in the carcass weight between sex and nutrient density. Dressing percent of L-L(gilts) treatment was significantly higher than that of other treatments(P< 0.05). Barrows showed a thicker back fat thickness than gilts. There were no difference in intramuscular fat, subcutaneous fat and springiness between sex and nutrient density. Intermuscular fat of barrows groups was significantly higher than the gilts groups(P < 0.05). In the meat quality characteristics, there were no difference in general composition, meat and fat color between sex and nutrient density. pH of L-L(gilts) treatment was significantly higher than that of other treatments(P < 0.05). Cooking loss and shear force value of H-M(barrows) treatment were significantly higher than those of other treatments(P< 0.05). Purge loss of barrows groups was significantly higher than the gilts groups(P < 0.05). Myoglobin content of H-M treatment was significantly lower than L-L and M-L treatments(P< 0.05). Texture of H-M treatment was higher than L-L and M-L treatments. The content of myristic, palmitic, palmitoleic and oleic acid were significantly higher in the barrows groups(P< 0.05). However, stearic, linoleic and arachidonic acid were significantly higher in the gilts(P < 0.05). Amino acid content of L-L treatment was significantly higher than M-L and H-M treatments(P < 0.05). In conclusion, carcass and pork quality characteristics were affected by sex and nutrient density.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.11a
• /
• pp.407-416
• /
• 2000

국방 부문에 종사하는 관리자들은 국방정보시스템 사업관리에 있어서 최신정보기술에 대한 기본적인 사항은 알고있어야 효율적이고 효과적이며 성공적인 사업관리를 진행할 수 있을 것이다. 국방 부문에 종사하는 관리자들이 저비용 고효율의 국방정보시스템을 건설하고 운영 유지관리 하기 위하여 알아야 할 핵심 및 최신정보기술은 크게 인공지능기술, 멀티미디어 정보화 기술, 가상현실 기술, 시뮬레이션 기술, 텔레프레즌스 기술, 나노테크놀로지 기술, 데이터베이스 기술, 병렬처리 기술, 로봇공학 기술, 소프트웨어 공학에 관련된 기술 등이 있다. 그러나 국방부문에 종사하는 정보통신 전문 인력을 제외한 관리자들이 국방관련 사업관리를 수행하면서 정보기술에 대한 이해 수준이 비교적 낮기 때문에 효율적으로 국방사업을 준비, 계획, 추진하기 어려운 실정이다. 따라서 국방부문에 종사하는 관리자들이 정보기술을 알기 쉽게 이해할 수 있도록 국방부문 핵심지능형정보기술 발전 및 군 활용방안을 이해하기 쉽도록 작성하며 효율적인 사업관리가 이루어질 수 있는 방안을 연구하였다. 본 논문은 국방부문핵심 지능정보기술 식별 및 활용방안을 연구하여 핵심적으로 식별된 사항들을 우리 국방부문의 $C^4$I(지휘, 통제, 통신, 컴퓨터시스템)시스템, 내장형 무기시스템, 각종 교육훈련 정보시스템, 자원관리 정보시스템 등에 어떻게 적용할 것이며 적용시 기대효과는 무엇인가를 제시토록 하여 국방부문에 종사하는 관리자들이 각종 국방사업을 조정, 통제, 확인, 감독, 준비/계획하면서 참고하여 저비용 고효율의 국방관련 각층 사업을 관리할 수 있는 능력을 배양시키도록 연구를 수행하였다. 국방관련 각종 사업을 관리할 수 있는 능력을 배양시키도록 연구를 수행하였다. 국방부문 핵심지능정보기술 발전 및 활용 방안에 포함될 주요 내용을 요약하여 제시하였다.의 경향성을 나타내는 오차 주기(error cyc1e)를 이용함으로써 고객들의 수요의 경향성을 좀 더 세밀한 부분까지 파악할 수 있게 해 준다.ction, secondary electron microscopy, atomic force microscoy, $\alpha$-step, Raman scattering spectroscopu, Fourier transform infrared spectroscopy 및 micro hardness tester를 이용하여 기판 bias 전압이 DLC 박막의 특성에 미치는 영향을 조사하였다. 분석결과 본 연구에서 제작된 DLC 박막은 탄소와 수소만으로 구성되어 있으며, 비정질 상태임을 알 수 있었다. 기판 bias 전압의 증가에 따라 박막의 두께가 감소됨을 알 수 있었고, -150V에서는 박막이 거의 만들어지지 않았으며, -200V에서는 기판 표면이 식각되었다. 이것은 기판 bias 전압과 ECR 플라즈마에 의한 이온충돌 효과 때문으로 판단되며, 150V 이하에서는 증착되는 양보다 re-sputtering 되는 양이 더 많을 것으로 생각된다. 기판 bias 전압을 증가시킬수록 플라즈마에 의한 이온충돌 현상이 두드러져 탄소와 결합하고 있던 수소원자들이 떨어져 나가는 탈수소화 (dehydrogenation) 현상을 확인할 수 있었으며, 이것은 C-H 결합에너지가 C-C 결합이나 C=C 결합보다 약하여 수소 원자가 비교적 해리가 잘되므로 이러한 현상이 일어난다고 판단된다. 결합이 끊어진 탄소 원자들은 다른 탄소원자들과 결합하여 3차원적 cross-link를 형성시켜 나가면서 내부 압축응력을 증가시키는 것으로 알려져 있으며, hardness 시험 결과로 이것을 확인할 수 있었다. 그리고 표면거칠기는 기판 bias 전압을 증가시킬수록 더 smooth 해짐을 확인

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.604-613
• /
• 2018

In recent years, numerous train derailment accidents caused by deterioration and high speed technology of railways have increased. Guardrails or barriers of railway bridges are installed to restrain and prevent the derailment of the train body level. On the other hand, it can result in a high casualties and secondary damage. Therefore, a Derailment Containment Provision (DCP) within the track at the wheel/bogie level was developed. DCP is designed for rapid installation because it reduces the impact load on the barrier and inertia force on the steep curve to minimize turnover, fall, and trespass on the other side track of the bridge. In this paper, DCP was analyzed using LS-Dyna with a parameter study as the impact loading location and interface contact condition. The contact conditions were analyzed using the Tiebreak contact simulating breakage of material properties and Perfect bond contact assuming fully attached. As a result, the Tiebreak contact behaved similarly with the actual behavior. In addition, the maximum displacement and flexural failure was generated on the interface and DCP center, respectively. The impact analysis was carried out in advance to confirm the DCP design due to the difficulties of performing the actual impact test, and it could change the DCP anchor design as the analysis results.

• International Area Studies Review
• /
• v.20 no.1
• /
• pp.277-295
• /
• 2016

It is undoubtedly true that national security in Korean peninsula is on the road to destabilization. The main factors are known to be North Korea's development and experiment on nuclear arms, especially the forth nuclear experiment on January 6th, ICBM launch February 7th, and encroachment upon the territory the NLL on the 8th along with the shutdown on Gaeseong Industrial Complex. Also, China's trouble with other nations over sovereignty over islands in the South China Sea and the fact that Japan's government is veering to the right side and having territorial dispute are making the case worse. Nations in Northeast Asia are striving to obtain the interest for the sake of their own country. In order to do so, they're walking the path to achieve national security. Until then, they are not so willing to participate foreign matters or economical race. Even in our perspective, these issues are many of the main problems which our country is currently facing. However, it is important for them to avoid making policies which may take away the citizen's happiness. The number one priority for the nation or any form of a group is to act in the best interest for the national security and the citizen's happiness. They are the main factors why a nation could exist. They are the symbols of a nation's sovereign authority. Countries outside are proving it by increasing their national defense budget even in this unprecedented economical crisis. If we are willing to stay the same as ever, the disparity in the military force will not be the same in the future. In conclusion, the study examines the problem which changes in Northeast Asia's defense environment could bring and the appropriate amount of national defense budget in order to support the nation's integration of its abilities to move toward South and North Korea's unification.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.78-85
• /
• 2019

This study targets SFRC hollow members with small depth under shear force and bending. To evaluate the effect of web width on shear strength of SFRC members, experiment and finite element analysis were conducted and compared with existing equations. The web width was planned to be 1/2 times and 2/3 times, and the shear span ratio was planned to be 1.5 times. In the shear test results, the maximum shear strength increased by 10.3 to 28.0% with the web width increased by 33%. When the overall depth of specimens was increased by 1.5 times, the shear strength of the specimen with a web width of 100mm was increased by 29.2%. On the other hand, specimen with the 150mm only increased by 11.3%. These results indicate that the smaller the web width, the greater the shear strength increase with the increase of depth. Also, the smaller the web width, the greater the contribution of steel fiber. It has been shown that the KCI code evaluates the shear strength of experiments as very safe side, and that the proposed formula of Shin et al. predicts the experimental strength relatively well. As the web width increases by 2, 3, and 6 times, the mean shear strength by FEA appears to be 1.18, 1.80, and 2.19 times respectively. This indicates that the shear strength does not increase in proportion to the increase in web width.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.569-576
• /
• 2019

PSC-Edge Rahmen Bridge makes low thickness and long span by introducing prestressed force to the edge girder and reducing positive moment. In the bridge, diagonal tension cracks occurred in the direction of $45^{\circ}$ to outer side of the girder after the temporary bent supported on the lower part of the upper slab and the secondary strand is tensioned on the girder. Researches on stress distribution and burst crack behavior of pre-stress anchorage has been conducted, it is difficult to analyze an obvious cause due to difference between actual shape and boundary condition. This study performed 3D frame analysis with additional boundary condition of temporary bent, the maximum compression stress occurred in the girder and there was a limit to identify the cause. It performed 3D Solid analysis with LUSAS 16.1 and the maximum principal tensile stress occurred at the boundary between the girder and the slab. As analyzing required reinforcement quantity at obtuse angle of the girder with the maximum principal tensile stress and directional cosine, reinforcement quantity was insufficient. Additional bridges have increased reinforcement quantity and extended area and crack was not occurred. It is expected that cracks on the girder during construction could be controlled by applying the proposed method to PSC-Edge Rahmen Bridge.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.4
• /
• pp.585-591
• /
• 2019

Objective: This study investigated carcass characteristics and meat quality of purebred Pakchong 5, crossbred pigs sired by Pakchong 5, and crossbred pigs sired by Duroc. Methods: Forty-eight pigs (average body weight of 22.25 kg) were composed of three groups as purebred Pakchong 5 (PP), Large $White{\times}Landrace$ pigs sired by Pakchong 5 (LWLRP), and Large $White{\times}Landrace$ pigs sired by Duroc (LWLRD). Each group consisted of eight gilts and eight barrows. At 109-day-raising period, pigs were slaughtered, and carcass characteristics were evaluated. Longissimus thoracis (LT) muscles from left side of carcasses were evaluated for meat quality and chemical composition. Data were analyzed using general linear model procedure, where group, sex, and their interaction were included in the model. Results: The PP had greater carcass, total lean, and ham percentages than crossbred pigs (p<0.05). LWLRP had thicker backfat and more carcass fat percentage than LWLRD (p<0.05). There were no differences (p>0.05) on cutting percentages from tender loin, loin, boston butt, and picnic shoulder among groups. The PP and LWLRP had larger loin eye area (LEA) than LWLRD (p<0.05). Gilts had more loin percentage and lower $L^*$ value than barrows (p<0.05). No meat color parameters ($L^*$, $a^*$, and $b^*$) were affected by groups (p>0.05). PP and LWLRP had larger muscle fiber diameters than LWLRD (p<0.05). However, water holding capacity, Warner-Bratzler shear force values, and chemical composition of LT were not affected by group or sex (p>0.05). Conclusion: Pakchong 5 purebred has good carcass and lean percentages. Compared to Duroc crossbred pigs, Pakchong 5 crossbreds have similar carcass and lean percentages, larger LEA, and slightly more carcass fat, with comparable meat quality and chemical composition. Pakchong 5 boars are more affordable for very small- to medium-scale pig producers.