• Macromolecular Research
• /
• v.17 no.10
• /
• pp.791-796
• /
• 2009

An electrochemically and photochemically polymerizable monomer, 2-((2,3-dihydrothieno[3,4-b] [1,4]dioxin-2-yl)methoxy)ethyl methacrylate (EDOT-EMA), was explored for patterning of poly(3,4-ethylenedioxythiophene) (PEDOT) via side chain cross-linking. The polymer from EDOT-EMA was deposited electrochemically to produce polymeric EDOT (PEDOT-EMA), which was directly photo-patterned by UV light as the side EMA groups of PEDOT-EMA were polymerized to give cross-linked EMA (PEDOT-PEMA). Absorption and FTIR studies of the UV-exposed film (PEDOT-PEMA) indicated that the photo-patterning mainly originated from the photo cross-linking of the methacrylates in the side-chain. After irradiation of the film, the conductivity of the irradiated area decreased from $5.6{\times}10^{-3}$ S/cm to $7.2{\times}10^{-4}$ S/cm, possibly due to bending of the conductive PEDOT channel as a result of the side chain cross-linking. The patterned film was applied to a solid state electrochromic (EC) cell to obtain micro-patterned EC cells with lines up to 5 ${\mu}m$ wide.

• Journal of Adhesion and Interface
• /
• v.10 no.3
• /
• pp.134-140
• /
• 2009

The acrylic copolymers with variation in side chain were synthesized based on molecular design. Wettability and adhesion properties on the wafer surface were investigated for these acrylic copolymer pressure sensitive adhesives. Three-dimensional networks of linear acrylic copolymers were produced with epoxy-type Tetra-DX cross-linking agent. The effect of cross-linking on adhesion characteristics was investigated. The side chain of acrylic copolymer played more important role in wettability than the interfacial interaction. As the degree of cross-linking increased, both probe tack and peel strength decreased. Also, heat resistance measured by SAFT increased with cross-linking; however, it showed the deterioration when excess cross-linking agent was added.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.5
• /
• pp.411-419
• /
• 2000

In this paper we have investigated the surface degradation by ultraviolet-irradiation in high-temperature vulcanized silicone rubber. Through the measurement of surface potential decay by corona-charging and of contact angle it is found that the change of surface electrostatic properties and the decrease of contact angle under UV-radiation. For the changes in micro-morphological and chemical structure of the UV-treated silicone rubber we utilized several analytical techniques such as SEM, ATR-FTIR,XPS. From this study it is shown that the chemical reactions(scissoring of side chain(S-$CH_3$) cross-linking and branching) occur on the surface of silicone rubber during the UV-irradiation. Also we obtained the results of the loss of low molecular weight chain by cross-linking and oxidation reaction.

• Macromolecular Research
• /
• v.17 no.11
• /
• pp.870-873
• /
• 2009

In this study, 2-diglycidylether of benzotrifluoride (2-DGEBTF) and 4-diglycidylether of benzotrifluoride (4-DGEBTF) epoxy resins, which contained fluorine groups in the main chain, were synthesized. The resins were characterized by FTIR, $^1H$ NMR, $^{13}C$ NMR and $^{19}F$ NMR spectroscopy. The 2-DGEBTF and 4-DGEBTF epoxy resins were cured with triethylene tetramine (TETA), and the effect of the fluorine group on the synthesized epoxy resin on the cure behavior, thermal, and mechanical properties was investigated. The 2-DGEBTF/TETA system was more reactive than the 4-DGEBTF/TETA system, whereas the thermal stability factor i.e., the decomposition activation energy ($E_d$), of 4-DGEBTF/TETA was higher than that of 2-DGEBTF/TETA. These results can be explained by the decrease in cross-linking density and decomposition of the short side chains, resulting in the $CF_3$ group at the para position. However, the $K_{IC}$ value of 4-DGEBTF/TETA was higher than that of 2-DGEBTF/TETA. This was attributed to the increase in flexibility in the epoxy backbone, resulting in a difference in steric hindrance and polarlizability.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.257-262
• /
• 1996

p-(2-Vinyloxyethoxy)benzylidenemalononitrile 2 and methyl p-(2-vinyloxyethoxy)benzylidenecyanoacetate 3 was prepared by the condensation of p-(2-vinyloxyethoxy)benzaldehyde 1 with malononitrile or methyl cyanoacetate, respectively. Vinyl ether monomers 2 and 3 polymerized quantitatively with radical initiators in γ-butyrolactone solution at 65 ℃. The trisubstituted terminal double bond participated in the vinyl polymerization and radical polymerization of 2 and 3 led to swelling polymers 4 and 5 that were not soluble in common solvents due to cross-linking. Under the same polymerization conditions ethylvinyl ether polymerized well with model compounds of p-methoxybenzylidenemalononitrile 6 and methyl p-methoxybenzylidenecyanoacetate 7, respectively, to give 1:1 alternating copolymers 8 and 9 in high yields. Polymers 4 and 5 showed a thermal stability up to 300 ℃ without any characteristic Tg peaks in DSC thermograms. Alternating copolymers 8 and 9 were soluble in common solvents such as acetone and DMSO, and the inherent viscosities of the polymers were in the range of 0.36-0.74 dL/g. Films cast from acetone solution were cloudy and tough and Tg values obtained from DSC thermograms were in the range of 59-60 ℃.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.140-145
• /
• 2006

The mort commonly available substrate material is glass in the display fibrication process. However, glass is not desirable due to its heaviness and fragility. Recently, plastics such polysulfone (PSF), polyethesulfone (PES), polycarbonate (PC), polyethylene terephthalate (PET) and cyclic olefin polymers (COP) have been investigated to replace glass as a substrate material for display fibrication. Plastic substrates are advantageous in that they are lightweight, huh impart resistance, flexibility, and ability for roll to roll manufacturing process. But many plastics have poor chemical resistance in organic solvent. The chemica resistance is also lequired because they are exposed to solvents for various chemical treatments din the manufacturing process. So, we have an interest in the chemical modification of PSF to improve chemical resistance. We introduced crosslinkable imide moieties using chloromethylation method for the modification of PSF which could be overcome above shortcomings for display substrate based on plastic film. We prepared the cross-linked polysulfone films which were represented chemical resistance in HeOH, THF, DMSO and NMP. The thermal properties were measured by TGA, DSC and TMA. As the results, we have confirmed to enhance of the thermal property. They had low coefficient of thermal expansion (CTE) which decreased to 15% and had increased $T_g\;from\;180^{\circ}C\;to\;252^{\circ}C$. Cross-linked polysulfone films with imide side-chain had good optical properties and chemical resistance so that they could be used as flexible display substrate.

• Elastomers and Composites
• /
• v.40 no.2
• /
• pp.136-142
• /
• 2005

Liquid crystalline poly(allylsulfone) networks having $SO_2$ in a main chain and mesogens in a side chain were synthesized and their gas permeability and permselectivity were determined. The monomer II having two allyl groups on the each end group was able to form polymer networks by polymerization reaction, while the monomer I having only one allyl group was not. Molecular motion of the poly(allylsulfone) networks were retarded with increasing the cross-linking density, and the segmental motion of networks was developed enough to show isotropic phase transition. Gas permeabilities of poly(II-5 $01/I-OCH_3$ 99) were 2.58 baller for $O_2$ and 18.4 barrer for $H_2$. It means that hydrogen gas are 7 times more permeable than oxygen. Its permselectivities were high as 23.9 for ${\alpha}(H_2/N_2)$. The permselectivity was increased with increasing the cross-linking density. For example, ${\alpha}(H_2/N_2)$ was 36.8 in poly(II-5 $10/I-OCH_3$ 90), which was shown to be the highest value among these poly(allylsulfone) networks.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.5
• /
• pp.816-828
• /
• 1995

During the industrial preparation and the storage of foods, the side chain of some protein-bound amino acids can react chemically each other or with other molecules present in the food. The following reactions have been described : destruction of amino acids, racemization, protein-protein interactions, reactions of proteins with reducing sugars, oxidizing agents, or polyphenols. Apart from total destruction, the main reacitons are the forming of Maillard reactions products(e.g. fructoselysine) and the crosslinking with other amino acids in the same or in another protein molecule(e.g. lysinoalanine). The most often involved amino acid is lysine because of its free functional ${\varepsilon}-amino$ acid group. Generally derivatives of amino acids or crosslinks in polypeptides influence the bioavailability and the overall digestibility of the protein. This work reviews the technological, analytical, nutritional, and physiological problems related to the formation of fructoselysine and lysinolalnine in human foods, and evaluates the possible health risk for humans. A summary of the available information is of help in considering whether or not the presence of fructoselysine/lysinoalanine in foods represents a danger to man. The reduction in protein quality through these reactions is not a problem for the general population, but it is extremely important in infant foods, since infants are often nourished with a limited number of food product(e.g. formular foods) which are sensitive to the Mailard reaction.

• Food Science and Biotechnology
• /
• v.15 no.3
• /
• pp.447-452
• /
• 2006

To determine the functions of specific cell wall polysaccharides, polysaccharides of three mutants, mur3-1, mur3-2, and mur3-3, obtained from Arabidopsis wild type, underwent structural characterization. Upon sequential separation of pectins (RG-I and RG-II) and cross-linking glycans (xyloglucan, XG), only XG was affected by the mud mutation. Wild-type XG contained a considerable amount of fucose, whereas the fucose level in mur3 XGs was less than 20% that of wild type. Further analysis of XGs by matrix-assisted laser-induced/ionization time-of-flight (MALDI-TOF) mass spectrometry indicated that mud lines considerably or completely lost the fucosylated XG oligosaccharides such as XXFG and XLFG and the double-galactosylated oligosaccharide XLLG $^1H$-NMR spectroscopic analyses of the XG oligosaccharides from mur3-3 plant revealed the absence of fucose and a galactose level in the galactosylated side chain that was reduced by 40% compared to that of Arabidopsis wild-type plant. In contrast, 85% less fucose and a slight loss of galactose were observed in the mur3-1 and mur3-2 lines which show normal growth habit. Of the three Arabidopsis mur3 lines studied here, mur3-3 is disrupted by a T-DNA insertion in the exon of MUR3 which encodes XG-specific galactosyltransferase, and exhibits slight dwarfism. These results indicated that the T-DNA insertion at the MUR3 locus did not induce the complete loss of galactose in XG, and that galactose, rather than fucose, in the XG side chains made a major contribution to overall wall strength.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.93-98
• /
• 2017

The fixing behaviors of raw silk yarns treated with melamine and formaldehyde at a molar ratio of 1:3 for trimethylolmelamine were investigated. Sericin was fixed during the fixing process, but a part of sericin I was removed simultaneously by hot water. The weight losses by fixing and the degumming losses by degumming greatly decreased with increasing concentrations of melamine and formaldehyde. The silk yarns fixed with 0.011 M melamine and 0.033M formaldehyde were significantly degummed due to the insufficient fixation of sericin and the alkaline hydrolysis of sericin by sodium carbonate during the degumming process. On the other hand, the silk yarns fixed with 0.055M melamine and 0.165M formaldehyde were degummed slightly (the degumming losses of 3-8%) due to the strong fixation of sericin, which might result from the many cross-linkages between the sericin I molecules, which were formed by trimethylolmelamine. Those fixed with the fixing solution containing 15% owf softener showed the lowest weight and degumming losses because under the condition of 15% owf softener, the cation of the softener can effectively form ionic bonds with the negatively charged side chain of aspartic acid in sericin. In addition, van der Waals' forces may be also formed between the hydrophobic tail of the softener and the hydrophobic region of sericin, which may help inhibit the removal of sericin I.