• 콘크리트학회논문집
• /
• 제14권5호
• /
• pp.726-733
• /
• 2002

수축대는 큰 부재를 공사기간 중 일정기각 동안 몇 개의 부분으로 나누어 부재내의 인장 응력을 유발시키지 않으면서 상당량의 건조수축이 발생하도록 하여 건조수축으로 인한 응력을 감소시키는 역할을 하는 일시적인 조인트이다. 본 연구에서는 시공단계와 크리프에 의한 응력완화 효과를 고려한 건조수축응력해석 방법을 바탕으로 수축대의 효과를 해석할 수 있는 방법을 제안하였다. 제안된 해석방법을 10층 규모의 예제 구조물에 적용하여 얻은 결과는 다음과 같다. 수축대의 응력감소효과는 수축대가 설치된 층에만 적용되며 다른 층 슬래브에는 오히려 건조수축응력을 다소 증가시키게 된다. 수축대의 메움시기 변화에 따른 건조수축응력 감소효과는 콘크리트모델의 건조수축변형량의 시간에 따른 변화와 유사한 양상을 보이고 있으며 수축대를 메우기 전에 발생한 건조수축변형량이 많을수록 수축대의 응력감소효과가 증가한다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.238-245
• /
• 2000

Separation strips are temporary joints to prevent crack due to stress induced by shrinkage. In this study, an analysis procedure considering separation strip is proposed to decide proper casting time of separation strip and cracking stresses of the example building slabs are calculated using this procedure. The result of the example high rise building shows that the percentage of cracking stress to the modulus of fracture is 43.4% when closing of separation strip are 30 days after placing the slab, so it is enough time for the separation strip in each floor to absorb the effects of shrinkage.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.251-256
• /
• 2001

Shrinkage during the curing and drying of concrete is unavoidable and results in many cracks. Shrinkage strips reduce effectively shrinkage stresses and minimize shrinkage cracks by being left open for a certain time during construction allow a significant part of the shrinkage to occur without inducing stresses. This study verifies the effectiveness of shrinkage strips and provides the guide for construction of such strips.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.827-832
• /
• 2001

Shrinkage during the curing and drying of concrete is unavoidable and results in many cracks. Shrinkage strips reduce effectively shrinkage stresses and minimize shrinkage cracks by being left open for a certain time during construction to allow a significant part of the shrinkage to occur without inducing stresses. This study verifies the effectiveness of shrinkage strips and provides the guide for construction of such strips.

• Journal of Periodontal and Implant Science
• /
• 제27권3호
• /
• pp.549-559
• /
• 1997

The purpose of this study was to evaluate clinical changes in graft size after treatment with strip gingival autograft in human. 57 premolar teeth in 27 patients having the following mucogingival problems were selected. The width of extension, attached gingiva including free marginal gingiva, width of transplant and clinical sulcus depth were measured at the initial examination, 2, 12 and 24 weeks following the strip gingival autograft and free gingival autograft. The change of width of extension, attached gingiva including free marginal gingiva, width of transplant and clinical sulcus depth according to healing process in both graft procedures was statistically analyzed by repeated measure ANOVA test and independent t-test using SPSS program. The results were as follows : 1. The change of keratinized gingiva in both graft procedures was increased significantly at 24 weeks post-op. 2. The clinical sulcus depth exhibited no marked changes throughout the entire investigation in both graft procedures. 3. No dimensional variation was seen in graft size in both graft procedures. 4. Shrinkage did not differ significantly in both graft procedures. From the day of grafting to 24 weeks after surgery the percentages of shrinkage were : strip gingival autograft 28% and free gingival autograft 29%.

• 건축구조
• /
• 제9권4호
• /
• pp.46-48
• /
• 2002

• Computers and Concrete
• /
• 제33권4호
• /
• pp.349-359
• /
• 2024

This study aims to investigate the effect of restraint configuration on crack formation due to shrinkage-and-creep-induced volumetric change in unbonded post-tensioned slabs. The first part of this study focuses on the comparison of existing shrinkage and creep calculation models that are used to predict the volume-changing behavior of concrete. The second part of this study presents the finite element analysis of a series of architectural configuration prototypes subjected to shrinkage and creep, which comprise unbonded post-tensioned slabs with various restraint configurations. The shrinkage and creep effects were simulated in the analysis by imposing strains obtained from one selected calculation model. The results suggest that a slab up to 300 ft. (90 m) in length does not require a closure strip if it is unrestrained by perimeter walls, and that the most effective restraint crack mitigation strategy for a slab restrained by perimeter walls is a partial wall release.

• 콘크리트학회지
• /
• 제14권2호
• /
• pp.77-82
• /
• 2002

일반적으로 공동주택 지하주차장과 같이 구조물이 대형화되거나 복잡할 경우 구조물의 응력취약 부위에서 균열, 누수 등의 문제가 발생할 확률이 크다. 이에 대한 대책으로 설계자들은 신축줄눈을 선호하고 있으나 신축줄눈은 시공상의 어려움과 사용 중 잦은 하자 발생이라는 문제점을 안고 있다. 이 때문에 근래에 들어 대형 건물을 한 단위로 처리하고 철근으로 보강하려는 경향이 있으나 구속도 차이에 따라 균열, 누수 등의 문제가 여전히 발생하고 있다. 이를 해결하기 위하여 수축대를 설치하여 일정 요구량의 초기 수축량을 수축대에서 흡수하고 이후 수축대 부위에 콘크리트를 메워 일체화시킴으로써 초기 수축에 의한 균열을 상당부분 방지할 수 있다.(중략)

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.787-792
• /
• 2002

The voided slab have many advantages, light weight, high load-distribution capacity, low cost and beautiful appearance, etc. But they have also many cracks due to difficulties in designs and construction, analysis, shrinkage, installation and rising force of voided tube. This paper presents the retrofit effects with steel plate(SP)/carbon fiber sheet(CFS) of RC voided slab. As a results of this study, it proved that the strip pattern has to be profitable than full-face pattern in performance such as crack, ultimate loads, stiffness. Retrofit length has many influence on retrofit effects, as the length increases, performance and stability of end blocks higher. Also, it proved that the retrofit on full-section has to be profitable than voided-section in performance, and the overlay length of CFS is desirable to extent approximately and welding(V-cut) has to be efficient than anchors in SP connection. But the kinds of end block and anchor has not influence on retrofit effects.

• 한국의류학회지
• /
• 제34권12호
• /
• pp.2062-2072
• /
• 2010

This research evaluates the change of the water absorbency and drying speed of a quick-drying knit fabric by repeated laundering and laundering conditions and investigates the influence of laundering conditions on the functional properties of the knit fabric. Four factors of laundering conditions were studied: detergent, water hardness, water temperature, and frequency of rotation. Knit fabrics were washed for 25 laundering cycles in a drum-type washing machine with nine different laundering conditions derived from an orthogonal array. The properties of knit fabrics were measured with a drop absorption test, a strip test, and a drying time test. Relaxation shrinkage pointed to a change in the structural characteristics of the knit fabric. Wetting time was faster and wickability was greater in the knit fabrics that underwent 5 laundering cycles; in addition, there were no obvious changes in wetting time and wickability. The detergent was the most important factor in wetting time (40.4%) and wickability (60% or above). Water hardness, water temperature and RPM had less of an effect on wetting time and wickability. There were no significant differences between the levels of laundering conditions (except for detergent) on wetting time and wickability. Drying times with neutral and alkali were slower by repeated laundering; however, there was no obvious change in drying time. Hardness, water temperature and RPM had less of an impact on drying time.