• 한국의상디자인학회지
• /
• 제10권2호
• /
• pp.125-138
• /
• 2008

For physical and hand property evaluation of fabrics, the knitted fabrics from 11 types of machines knitting fancy yarns, boucle (M1), knot (M2), snarl (M3), and slub (M4), tamtam (M5), tubular (M6), fur 1 (M7), bead (M8), fur 2 (M9), fur 3 (M10), and ladder (M11) yarns, were prepared with 7-10 G plain stitch. Washing test and pilling test had also been carried out. For hand properties by objective sensibility evaluation, 17 items of sir mechanical properties using KES-FB (Kawabata Evaluation System) had been measured. Then hand values of knitted fabrics were calculated with a calculation formula, namely KN-402-KT. Finally the total hand values were obtained through KN-301-WINTER. As a result of physical properties and objective evaluation for machines knitting fancy fabrics, most of them shrank in the direction of wale and course after the washing test, in which their shrinkage rate had a maximum of 3.5%. Therefore, the washing test indicated that the shrinkage ratio of knitted fabrics had a minor change. The results of the pilling test are mostly 4-5th grade, and all of the machines knitting fancy fabrics showed good results in the pilling resistance. In hand properties and objective sensibility evaluation, twisted fancy yarns, such as boucle (M1), knot (M2), snarl (M3), and slub (M4), were superior to bonding rigidity (B) and shear rigidity (G). The surface property between course and wale differs in all samples and course direction is tougher than wale direction. FUKURAMI (fullness and softness) of all samples have high values, besides NUMERI (smoothness) of tamtam (M5) and boucle (M1), which were rather good. Most samples except fur 1 (M7) had low KOSHI (stiffness) value. The total hand value (THV) of twisted yarns was low. This study proves that manufacturers, who plan knitting yarn products and knit fashion, can apply these data to develop machines knitting yarns and knits that fit the consumers' demands.

• 한국분말재료학회지
• /
• 제10권3호
• /
• pp.172-175
• /
• 2003

Mechanically-alloyed NiAl powder was sintered by Spark-Plasma Sintering (SPS) process. Densification and behavior mechanical property were determined from the experimental results and analysis ,such as changes in linear shrinkage, shrinkage rate, microstructure, and phase during sintering process, Victors hardness, and transver.ie-rupture-strength (TRS). Above 97% relative density was obtained after sintering at 115$0^{\circ}C$ for 5 min. Crystallite size determined by the Scherrer method was approximately 50 nm. From the X-ray diffraction analysis it was confirmed that the sintered bodies were composed mainly of NiAl phase together with Ni$_3$Al phase. Measured Vickers hardness and TRS value were 555$\pm$10 $H_v$ and 1393$\pm$75 MPa , respectively.

• 한국의류산업학회지
• /
• 제3권3호
• /
• pp.283-289
• /
• 2001

Shrink resist finishing of wool fabric was carried out with Monoethanol aminesulphite (MONAMIN BTN) shrink resist agent after chlorination with Dichloro isocyanuric acid (DCCA). The purpose of this study is to investigate the effect of treating conditions, such as concentrations of DCCA and MONAMIN BTN, pH of treating bath, dyeing times, curing times and temperatures, on dyeing property of wool fabrics. K/S values and fastness properties of dyed wool fabrics were measured. The K/S values of dyed fabrics were increased gradually with increasing concentration, and decreased with increasing curing time. The optimum dyeing time and curing temperature were 60 min and $140^{\circ}C$, respectively. Also it seems likely that the shrink resist finishing carried out at 3% (o.w.f.) of MONAMIN BTN and pH 7 of resin treating bath is effective in increasing K/S values. Light fastness of fabric dyed was very poor and the fastness of fabric dyed was not influenced by the treatment conditions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.425-428
• /
• 2008

최근 국내에서도 경량콘크리트에 대한 필요성이 점차 증가하고 있으나 아직 비구조용으로 국한되어 사용되어지고 있으며 구조용으로써 사용에 대한 방안이 필요하다. 또한 경량골재콘크리트와 관련한 다양한 연구가 수행되고 있으나 내구적 특성 분석을 통한 장기안정성 검토를 실시한 예는 매우 부족한 실정이므로 다양한 내구특성 실험을 통한 구조용 경량골재콘크리트의 내구성능평가를 실시하여 그 적용성을 검증하는 연구는 매우 시급하다고 할 수 있다. 따라서 본 연구에서는 경량골재콘크리트의 적극적인 활용을 위하여 경량골재 콘크리트의 기초 역학적 성능을 평가하고, 이에 대한 건조수축 및 크리프에 대한 시험을 실시하여 내구특성의 영향요인을 분석하고자 고강도 에코인공경량골재콘크리트의 물성으로 슬럼프플로 500${\pm}$50mm, 공기량 2.0${\pm}$1.0%로 하였으며, 물결합재비는 35, 39% 두 수준으로 하였으며 기본 물성 시험과 압축강도 시험을 실시하고 건조 수축 및 압축 크리프 실험을 실시하였다.

• 대한치과보철학회지
• /
• 제38권6호
• /
• pp.782-790
• /
• 2000

The mainly used polymeric material for the denture is PMMA because of its cost and easiness to handle. So it was widely used material among dentists for past decades. But the acrylic-based denture materials have several common weak points such as shrinkage after curing and lack of strength. In order to solve these problems, we adapted one of hybrid system using acrylic polymer and vinyloligosilsesquioxane(POSS). POSS, which is a well known expandable monomer during polymerization process, may eventually suppress volumetric shrinkage. And the hybrid system makes it possible for the polymer to be stable in various severe conditions. Eight different kinds of samples were designed and synthesized. Each samples were characterized with dynamic mechanical analyser(DMA) to confirm their thermodynamic properties, fractured to analyze the cross-sectional morphology of the samples. And elongation, flexural and impact tests were also executed to evaluate the mechanical properties of the samples. From the results, hybrid composites had well defined crosslinked network structure compared to the widely used denture materials, and the mechanical strength improved without changing any surface condition as increment with POSS ratio in hybrid system. Fractured morphology showed homogeneous surfaces in spite of mutli component system, therefore we can conclude that the adoption of the POSS brought the reinforcement of the denture resin.

• 한국건설순환자원학회논문집
• /
• 제4권3호
• /
• pp.62-68
• /
• 2009

본 연구는 BFS치환율 증가에 따른 고강도 콘크리트의 제반 공학적 특성을 검토하였는데, 그 결과를 요약하면 다음과 같다. 굳지않은 콘크리트의 유동성은 BFS 치환율이 증가할수록 증가하는 경향을 나타내었고, 공기량은 다소 감소하는 경향을 나타내었으나 AE제 사용량 증가로 적정량의 공기량 확보는 가능할 것으로 판단된다. 응결시간은 BFS 치환율이 증가할수록 비례적으로 크게 지연되는 것으로 나타났다. 경화 콘크리트의 압축강도는 BFS의 잠재수경성 반응에 기인하여 BFS 치환율이 증가할수록 재령 28일 미만에서는 OPC에 비하여 저하하였으나, 그 이후 재령에서는 동등 이상의 수준을 발휘 하는 것으로 나타나 특히, 고강도 콘크리트의 활용에 탁월한 효과가 있는 것으로 분석되었다. 건조수축길이 변화율은 W/B가 클수록 수화반응시 콘크리트 내부에 존재하는 자유수의 양이 증가함에 기인하여 다소 크게 나타났고, BFS 치환율이 증가할수록 건조수축량은 증가하는 경향이 나타났으나, 모든 배합에서 $-500{\times}10^{-6}$이하로 비교적 양호하였다.

• 한국건축시공학회지
• /
• 제12권4호
• /
• pp.393-400
• /
• 2012

본 연구에서는 고로슬래그의 치환율이 80% 이상에 이르는 슬래그 대량 치환 콘크리트(High Volume Slag Concrete, HVSC)의 개발을 목표로 응결특성, 압축강도, 건조수축 및 중성화 저항성에 미치는 고로슬래그 치환율의 영향 및 알칼리 자극제의 효과에 대해 평가하였다. 고로슬래그 미분말의 치환율 증가에 따른 시험결과는 다음과 같다. 응결시간은 초결 및 종결 도달시간이 약 2~2.5 시간 지연되는 것으로 나타났으며 압축강도 발현특성은 초기 및 장기의 모든 재령에서 감소하였다. 건조수축은 치환율에 따른 뚜렷한 경향을 나타내지 않았으며 모든 배합에서 $6{\times}10^{-4}$ 이하의 값을 보여 매우 양호한 것으로 나타났다. 중성화는 현저히 증가하는 경향을 나타냈다. 한편 알칼리 자극제의 첨가에 따른 응결시간 및 초기강도 발현특성은 현저히 개선되었으며 건조수축에 기여하는 효과가 큰 것으로 나타났다. 반면 중성화 저항성에 미치는 영향은 크지 않은 것으로 나타났다.

• 산업기술연구
• /
• 제20권A호
• /
• pp.101-111
• /
• 2000

This research is results of experimental and numerical works on characteristic of strength increase and bearing capacity in dredged and reclaimed soil due to desiccation shrinkage. For a soil sampled from southern coastal area in Korea, basic soil property tests and standard consolidation test with falling head permeability tests were carried out to obtain consolidational characteristics of soil. Double cone penetration test, laboratory vane test and unconfined compression test were also performed to investigate the change of shear strength with degree of desiccation. Model tests were performed in 1G environment and 30G level artificially accelerated condition by using the centrifuge model test facilities to investigate the bearing capacity of desiccated ground. Test results were analyzed by using the theoretical and load-settlement characteristics method proposed by Meyehof & Hanna(1978). On the other hands, the numerical technique, using the finite strain consolidation theory considering the effect of desiccation was used to estimate the appropriate time of using heavy construction equipments in field with respect to strength increase due to desiccation.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.39-45
• /
• 1998

In the previous study. the powder casting was attempted as the rapid tooling. The powder casting was the process to cast dry powder into the casting mold transferred from R/P model and infiltrate the liquid binder to solidify the powder. And then, the melted copper was infiltrated to control the shrinkage rate of the final mold Conseqently, the shrinkage rate was under 0.1% through that process. The mechanical characteristic was also excellent. Generally, in the slurry casting, the alumina powder and the water soluble phenol were mainly used. However, the mechanical property of the phenol was not good enough to apply to molds directly. In this study, aluminium powder filled with epoxy is applicated to the slurry casting to solve these problems. The mechanical and thermal properties are better than phenol because the epoxy is the thermosetting resin. We achieved a successful result that the shrinkage rate is shortened about 0.047%. Futhermore, the manufacturing time and cost savings are significant. Finally, we assume that the developing possibility of this process is very optimistic.

• Nuclear Engineering and Technology
• /
• 제33권2호
• /
• pp.184-191
• /
• 2001

The effects of ${\gamma}$-irradiation on the crosslinking of high density polyethylene (HDPE) was investigated for the purpose of obtaining a suitable formulation for heat shrinkable materials. In this study the HDPE specimens were prepared by blending with cross linking agents and pressed into a 0.2 mm sheet at 18$0^{\circ}C$. ${\gamma}$-irradiation was conducted at 40 to 100 kGy in nitrogen. The heat shrinkable property and thermal mechanical property of the HDPE sheets have been investigated. It was found that the degree of crosslinking of the irradiated HDPE samples were increased with irradiation dose. Compared with the HDPE containing triallylisocyanurate, the HDPE containing trimethylol propane triacrylate shows a slight increase in crosslinking density. The heat transformation and dimension change of HDPE decreased with increasing radiation dose. The heat shrinkage of the samples increased with increasing annealing temperatures. The thermal resistance of HDPE increased upon the crosslinking of HDPE.