• 한국수정란이식학회지
• /
• 제25권1호
• /
• pp.9-14
• /
• 2010

This study was conducted to find out the effects of artificial shrinkage (AS) on post-thaw development of bovine embryos. The blastocoelic cavity of blastocyst was punctured to remove its fluid contents and then incubated in the holding medium (HM) for 10 min. The punctured and non-punctured (control) blastocysts were equilibrated in vitrification solution 1 (VS1; TCM-199+20% FBS+10% EG) for 5 min and vitrification solution 2 (VS2; TCM199+20% FBS+35% EG+5% PVP+0.5 M Sucrose) for 1 min and vitrified by direct dropping into the liquid nitrogen. Vitrified blastocysts (punctured and control) were thawed and cultured in vitro (12 hr) for studying survival and hatching rates. The levels of shrinkage were measured by the volume of the blastocyst during equilibration in VS1 (at 1, 3 and 5 min of equilibration) and VS2 (at 30 and 60 sec of equilibration) that was considering the volume of non-punctured blastocyst in HM as 100%. The levels of shrinkage were higher in punctured group (62.4, 64.6, 64.3% at 1, 3 and 5 min in VS1; 50.6 and 52.7% at 30 and 60 sec in VS2) than control group (84.8, 86.6, 86.4% at 1, 3 and 5 min in VS1; 72.1 and 68.8% at 30 and 60 sec in VS2), but within each group the levels of shrinkage were similar. The survival (90.9%) and hatching (50.0%) rates of vitrified blastocysts at 12 hr post-thaw were higher in punctured group than that in control group (76.9% and 0.0% respectively). We confirmed that vitrification solutions (VS1 and VS2) have no toxic effect on the survival of blastocysts because the survival rates of blastocysts exposed to VS1 and VS2 for 24 hr were similar between punctured and control groups (94.3 vs. 96.0%; p>0.05). In conclusion, the preliminary data show that AS of blastocyst may improve survival and hatching rate after thawing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.118-121
• /
• 2000

CFRD (Concrete Faced Rockfill Dam) face slab concrete has a much capability to occur crack due to drying shrinkage, hydration heat and bas compaction etc. Because of crack of concrete induce structural problem and decrease durability of concrete, it is need to reduce crack of concrete. This is an experimental study to analyze the Control Property of Plastic Shrinkage Crack for CFRD face slab concrete. For this purpose, it was investigated and analyzed the engineering properties of plain concrete and using admixtures (polypropylene fiber, fly-ash) according to test result As the result, it was found that crack width and area of concrete using admixtures less than of plain concrete.

• 콘크리트학회논문집
• /
• 제12권2호
• /
• pp.89-98
• /
• 2000

The mechanical properties of specialty cellulose fiber reinforced concrete and the contribution of specialty cellulose fiber to drying shrinkage crack reduction potential of concrete and theirs evaluation are presented in this paper. The effects of differing fiber volume fraction(0.03%, 0.06%, 0.08%, 0.1%, 0.15%, 0.2%) were studied. The results of tests of the specialty cellulose fiber reinforced concrete were compared with plain and polypropylene fiber reinforced concrete. Flexural performance(flexural strength and flexural toughness) test results indicated that specialty cellulose fiber reinforcement showed an ability to increase the flexural performance of normal- and high- strength concrete(as compared to plain and polypropylene fiber reinforced concrete). Optimum specialty cellulose fiber reinforced concrete were obtianed using 0.08% fiber volume fraction. Drying shrinkage cracking test results confirmed specialty cellulose fibers are effective in reducing the drying shrinkage cracking of normal and high-strength concrete(as compared to popylene fiber reinforced concrete).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.405-408
• /
• 2006

The purpose of this study was to determine the optimum length distribution of hybrid PVA(Poly vinyl alcohol) fiber. To produce blended PVA fiber length, first the length distribution of PVA fiber in the cement composites were identified in an experimental study based on simplex lattice design. Among the different length distributions investigated, fiber length was found to have statistically significant effect on plastic shrinkage cracking of cement composites. Subsequently, Complex analysis techniques were used to devise an experimental program that helped determine the optimum combinations of the selected fiber length distribution based on plastic shrinkage crack. The optimum blended PVA length ratio was 0.0146% 4mm fiber, 0.0060% 6-mm fiber, 0.0285% 8-mm fiber, and 0.0209% 12-mm fiber.

• 한국기계가공학회지
• /
• 제6권4호
• /
• pp.65-70
• /
• 2007

In this study, we analyzed about that after design form manufacture master pattern in Rapid Prototyping-RP through design program, processes to manufacture prototype using Vacuum Casting. In Rapid Prototyping-RP, there is an en-or by shrinkage of resin and, in Vacuum Casting, there is an error by shrinkage of silicon. To select condition which shrinkage become the minimum of each process, manufactured prototype after using Full Factorial Design of Design of Experiments, We could confirm shrinkage using reverse engineering and that result came into effect ANOVA 2-way. We applied errors of each process to master pattern, and then presented the method to improve flood control precision of prototype of Vacuum Casting.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.289-290
• /
• 2012

In this study, it was evaluated about shrinkage properties of high strength concrete according to poly mix fiber and moisture evaporation condition. As a results, When concrete was mixed with poly mix fiber of spalling control, it reduced effect of shrinkage independent of the evaporation conditions of unsealed and sealed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.275-276
• /
• 2018

Ultra high performance concrete(UHPC) represents high early age autogenous shrinkage strain due to its low water-to-binder ratio(W/B) and high fineness admixture usage. It has been reported that fiber can control restrained tensile stress and crack. The purpose of the present study is, therefore, to investigate the autogenous shrinkage as well as mechanical properties including compressive strength, flexural strength and modulus of elasticity on the UHPC with fiber type and pre-mix of binder.

• Journal of Welding and Joining
• /
• 제34권6호
• /
• pp.20-27
• /
• 2016

This study deals with the proper conditions of the trail rolling method (TRM) for the prevention of the buckling welding distortion at the AA5083 GMA butt weldment. For it, the effect of the working conditions of TRM including the rolling depth and the rolling distance between the welding torch and the roller on the longitudinal welding shrinkage force of the weldment was evaluated by using 3 dimensional thermo-mechanical FE analyses. The longitudinal welding shrinkage force inducing the buckling welding distortion at the GMA butt weldment was mitigated with an increase in the rolling depth and the rolling distance between the welding torch and the roller. Based on the results, the proper conditions of trail rolling method were established to reduce the longitudinal welding shrinkage force of the GMA butt weldment to below the critical value corresponding to the bucking distortion.

• 한국도로학회논문집
• /
• 제10권1호
• /
• pp.117-122
• /
• 2008

콘크리트포장은 시공초기의 품질관리수준에 따라 전체수명이 결정될 정도로 시공초기의 품질관리가 매우 중요하다. 이러한 초기 품질관리는 콘크리트포장의 초기거동을 잘 파악하여 초기거동을 조절할 수 있는 방안을 도출하는 것이 중요하다. 콘크리트포장의 초기거동에 영향을 주는 요소는 크게 두 가지가 있다. 첫째는 콘크리트의 건조수축이고, 두 번째는 수화열 및 대기온도 변화에 따른 포장체의 온도변화이다. 따라서, 콘크리트의 열팽창계수와 건조수축은 콘크리트의 초기거동에 매우 중요한 요소라 할 수 있다. 지금까지의 열팽창계수는 완전히 양생된 콘크리트에 대해 실험하는 것이 일반적이었기 때문에 시공초기에 열팽창계수를 얻는데 한계가 있어 왔다. 또 건조수축도 시간방법의 한계로 초기 건조수축을 측정하는데 어려움이 있어 왔다. 본 연구에서는 콘크리트포장의 초기 거동을 조절할 수 있는 방안을 도출하기 위하여, 콘크리트의 초기 건조수축과 열팽창계수를 측정하고 이를 통해 콘크리트포장의 초기 거동 예측프로그램의 입력변수들과 적용 모델들에 대한 자료제공 및 검증을 위 한 기초자료를 제공하는데 그 목적을 두었다. 본 연구에서 얻은 결론은 현장에서 초기 콘크리트의 열팽창계수 값을 측정한 결과 $8.9{\sim}10.8{\times}10^{-6}/^{\circ}C$ 값을 나타내었으며, 콘크리트의 건조수축에 있어서 깊이별 effect와 size effect가 존재하는 것으로 분석되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.653-656
• /
• 2008

초고강도 콘크리트는 결합재의 다량 사용에 따라 건조수축보다 큰 자기수축 변형이 나타나며 이는 구조물의 품질을 저해하는 요인으로 작용하여 초고강도 콘크리트의 수축변형을 최소화시키기 위한 기술이 필요하다. 이에 본 연구에서는 설계기준강도 100MPa 이상을 갖는 초고강도 콘크리트를 제조하고 팽창제를 혼입한 초고강도 콘크리트에 대하여 자유수축시험체로 매립형게이지를 통한 수축변형을 측정하였다. 그 결과 팽창제의 혼입으로 초기상태의 콘크리트는 팽창율이 증가하나 장기적 측면에서의 수축율이 둔화되는 것으로 나타났으며, 이를 통한 팽창제를 통하여 수축저감에 관한 효과가 기대된다. 아울러팽창제의 혼입에 따른 압축강도에 미치는 영향은 미미한 것으로 나타났다.