• International journal of advanced smart convergence
• /
• 제13권3호
• /
• pp.328-334
• /
• 2024

This study uses Pathfinder software to simulate and analyze the safe evacuation of university dormitory occupants. Fire safety issues in densely populated dormitory buildings are gaining increasing attention, and improving emergency evacuation efficiency is crucial for reducing the harm caused by fire incidents. The study focuses on a student dormitory building in a university, simulating different evacuation scenarios and analyzing the impact of factors such as evacuation routes, personnel distribution, exit width, and stair width on evacuation time. Based on the actual dormitory conditions, parameters such as gender ratio, height range, shoulder width, and walking speed of the occupants were set, and evacuation times in various scenarios were compared.The simulation results show that proper planning of evacuation routes and increasing stair width significantly reduced evacuation times. The study recommends that universities establish systematic emergency response plans, conduct regular evacuation drills, optimize student dormitory layouts, and consider increasing stair width in dormitory building designs to improve evacuation efficiency and safety.

• 복식
• /
• 제51권7호
• /
• pp.147-165
• /
• 2001

The objective of this study was to develop the Jeogori Pattern for 9 to 10 year-old boys To determine the measurement items for the Jeogori Pattern making, applied factor analysis, correlation analysis and regression analysis to the 37 measurement items of the 9 to 10 year-old boys classified as a standard somatotype. To understand the shape and variation of the body surface, analyzed the replica of the upper body surface that was obtained by the method of using surgical tape. Be based on the results of the above studies, designed the Jeogori Pattern. The designed pattern was evaluated by the sensory test. The drafting methods of Jeogori Pattern obtained are as follows. $\circled1$ The measurement items are Bust Girth, Center Back Waist Length, Neck Width, and Hwajang Length. $\circled2$ Jeogori Length Center Back Waist Length$\times$4/3 $\circled3$ Front Body Girth(1/2) : B/2 + 1.5cm Back Body Girth(1/2) : B/2 + 3.5cm $\circled4$ Jin-Dong : B/4 + 3cm $\circled5$ Back Godae Width(1/2) : Neck Width/2 + 1.7cm Front Godae Width(l/2) : Back Godae Width(1/2) - 2cm $\circled6$Back Godae Point is 1.5cm higher than shoulder line, and Front Godae Point is 1.5cm lower than shoulder line. $\circled7$ Back Godae Depth: 1.2cm + 1.5cm = 2.7cm The Jeogori Pattern designed by the above method Is as (fig. 8) The results of the sensory test of the new pattern are as fellows. Except for 2 items, every mark of 24 test items has over 5.0 point and a total average mark is 5.25 point. Witch is a good mark. Therefore the new pattern is valid. Especially, the parts of Git, sleeves and back face have a high mark, so the appearances of those parts are excellent.

• Clinics in Shoulder and Elbow
• /
• 제24권2호
• /
• pp.66-71
• /
• 2021

Background: Extra-articular distal humerus locking plates (EADHPs) are precontoured anatomical plates widely used to repair distal humeral extra-articular diaphyseal fractures. However, EADHPs frequently cause distal protrusion and resulting skin discomfort. The purpose of this study was to predict the occurrence of anatomic fit mismatch. We hypothesized that the smaller the humerus size, the greater the anatomic fit mismatch with EADHP. Methods: Twenty humeri were analyzed in this study. Humeral length and distal humeral width were used as parameters of humeral size. Plate protrusion was measured between the EADHP distal tip and the distal humerus. We set the level of unacceptable EADHP anatomic fit mismatch as ≥10 mm plate protrusion. Results: A significant negative linear correlation was also confirmed between humeral size and plate protrusion, with a coefficient of determination of 0.477 for humeral length and 0.814 for distal humeral width. The cutoff value of humeral length to avoid ≥10 mm plate protrusion was 293.6 mm (sensitivity, 88.9%; specificity, 81.8%) and for distal humeral width was 60.5 mm (sensitivity, 100%; specificity, 81.8%). Conclusions: Anatomic fit mismatch in distal humeral fractures after EADHP fixation has a negative linear correlation with humeral length and distal humeral width. For patients with a distal humeral width <60.5 mm, ≥10 mm plate protrusion will occur when an EADHP is used, and an alternative implant or approach should be considered.

• 대한인간공학회지
• /
• 제28권2호
• /
• pp.35-55
• /
• 2009

The purpose of this study was to analyze the somatotypes of women in the early 20's, which were likely to deform due to bad posture in growth period. Accordingly, bodies of women aged 20 to 24, whose growth stopped, were measured directly and indirectly, and factors related to body shapes were extracted, body shapes were categorized based on the data, and the characteristics of each body shape were analyzed. As a result, 10 factors related to body shapes were extracted in the factor analysis, and body shapes were categorized into 6 types. Type 1 was the volume of body that was big and the longest; and the general frame was large. The straight body shape with small back protrusion; the shoulder is relatively thick and the width of the shoulder was normal. Type 2 was the volume of body that was the biggest and the upper body was the longest; the general frame was of average height. The forward body shape with the back flat; the shoulder was very thick, wide, and serious leaning forward. Type 3 was a body that was thin and the shortest. The sway-back body shape with big curvature at the back; the shoulder was thin, narrow, and straight. Type 4 was a body that was short stature, and the general frame was of average build. The forward body shape with the most serious back protrusion; the shoulder was normally thick, narrow, and straight. Type 5 was a group with small body, and the lower body and general frame are long. The sway-back body shape with protrusion at the upper shoulder and the sides leaning backward; the shoulder was thin, wide, and leaning forward. Type 6 was a thin and short body; and the general frame was small. The lean-back body shape with the smallest back protrusion and leaning backward; the shoulder was thin, narrow, and leaning backward. Characteristics of the classified body shapes can be used in producing ready-made clothes, and it is hoped that there will be follow-up studies on clothing pattern design and production based on this result.

• 패션비즈니스
• /
• 제11권4호
• /
• pp.135-151
• /
• 2007

This study is human body measurement of 200 adult males in their 20s by both direct and indirect methods in order to reveal the representative male upper body types. Composition factors of body types were classified while the combination of direct-indirect measurement values was chosen. The following are the findings: 1) The analysis of direct-indirect measurement statistics showed the following results: 173.80cm (height), 69.87kg (weight), 95.58cm (chest girth), $24.67^{\circ}$ (right shoulder angle), and $9.34^{\circ}$ (shoulder width angle). 2) The factor analysis of the body types by direct measurement produced 5 factors: 1 (front length of upper body), 2 (front length of upper body), 3 (back length of upper body), 4 (circumference of upper body), and 5 (shoulders length). These factors accounted for 90.08%. Also, the cluster analysis of factor scores led to 3 types: 1 (33%, short, comparatively wide shoulders and full in the hips), 2 (25.1%, well-developed upper body in tall, inversed triangle), 3 (41%, average height, short upper body). 3) The body-type factor analysis by indirect measurement resulted in 6 factors with the explanation of 83.24%: 1 (rear upper bady thickness), 2 (front upper body width), 3 (front chest thickness), 4 (left-right shoulder angle), 5 (front width of protrusion distance in chest and shoulders), and 6 (neck's front-rear side angle).In addition, the cluster analysis of factor scores brought about 4 types: 1 (15%, well-developed front chest, beardless waist), 2 (23.5%, flat chest, with shoulder, drooping shoulders, strait neck), 3 (39%, with shoulder, curved back), and 4 (22.5%, narrow and thin, curved waist). 4) Among the 118 subjects (75%), 58 subjects commonly appearing in indirect measurement values group and direct measurement values group were chosen the representative body type group according to asterisk indexes. They had the highest frequency in direct type 3 and indirect type 3, whose combination represented the physical characteristics of the representative body types.

• 한국의류학회지
• /
• 제36권3호
• /
• pp.311-323
• /
• 2012

This study establishes the initial data to develop a well-fitted underwear pattern by categorizing and analyzing torso types based on body measurements of women in their 50s and 60s. The results are as follows: First, the statistical assessment on the body measurements showed meaningful differences among age groups in twenty seven items (except for bust breadth, hip width armscye depth, hip depth, neck base circumference, armscye circumference, chest circumference, hip circumference, bishoulder length, shoulder length, front interscye, back interscye, weight and inclined angle of left shoulder). Women in their early 50s and late 60s (respectively) showed the highest values in height and depth. Second, there are five body factors according to the results of the factor analysis: Factor 1 (circumference, width, and depth of upper body measurements) - the degree of body depth and obesity, Factor 2 (height and vertical length) - The vertical torso length, Factor 3 - the size of shoulder, Factor 4 - the vertical upper body length, and Factor 5 - the size of shoulder angle. Third, the results of the cluster analysis showed that there are four distinctive body types. The largest number of the study subjects was related to Type 3 (30.69%), followed by Type 2 (26.78%), Type 1 (25.84%), and Type 4 (16.69%), respectively. For distribution of age groups by body type, Type 3 was the most common among the 60s group while Type 2 appeared most frequently among the 50s.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.219-237
• /
• 2003

he purpose of this study was to compare the fracture resistance of the IPS Empress ceramic crown with 1.0mm width rounded shoulder, which is usually recommended in all ceramic crown, and 0.5mm width chamfer finish lines on the maxillary first premolar. 30 sound maxillary first premolars were selected and then storaged in 5% NaOCl and saline. 15 teeth were performed preparation for each group(1.0mm rounded shoulder, 0.5mm chamfer). After 30 stone dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan) on the natural teeth. The cemented crowns were mounted on the positioning jig and the universal testing machine(Zwick Z020, Zwick Co., Germany)was used to measure the fracture strength, with stress loading on the occlusal surface between buccal and lingual cusp. And also, three-dimensional finite element model was used to measure the stress distribution with two types of the finish lines(1.0mm rounded shoulder, 0.5mm chamfer) and two loading conditions(both buccal and lingual cusp inclination, lingual cusp inclination only). The result of the this study were as follows. In the fracture resistance experiment according to the finish line, the mean fracture strength of rounded shoulder(842N) showed higher value than that of the chamfer(590N) (p<0.05). In the three dimensional finite element analysis of all ceramic crown, metal die and natural teeth model did not show any differences in stress distribution between finish lines. Generally, when force was loaded on the occlusal inclination of buccal and lingual cusp, the stress was concentrated on the loading point and the central groove of occlusal surface. When force was loaded only on the occlusal inclination of lingual cusp, the stress was concentrated on the lingual finish line and loading point.

• 한국컴퓨터정보학회논문지
• /
• 제24권10호
• /
• pp.117-127
• /
• 2019

본 연구에서는 사이즈코리아의 제7차 인체측정조사 자료 중 40-59세 중년 남성의 직접 계측 데이터를 분석하여 전신 체형의 특성을 알아보고, 중년 남성의 전신 체형을 유형화하고자 하였다. 이를 통해 맞음새가 우수한 중년 남성의 의복패턴 제작에 필요한 기초자료를 제공하고자 하였다. 전신 계측자료는 SPSS Ver. 24.0 프로그램으로 분석하였다. 요인은 신체의 수평, 수직, 어깨관련, 앞중심길이, 다리굵기, 어깨처짐 등 6개 요인이 추출되었다. 중년 남성의 전신체형은 3개로 유형화되어 유형1은 둘레는 가늘고 너비는 좁으며, 높이는 낮고 앞중심길이는 짧으며 다리가 얇은 체형이다. 유형 2는 높이는 높고 앞중심길이는 길며, 둘레 및 너비는 보통으로 다리가 굵고 어깨가 처진 체형이다. 유형3은 둘레는 크고 너비는 넓으며 어깨도 넓은 체형으로 앞중심길이는 긴 편이지만 신체높이는 낮고 어깨가 처지지 않은 체형이다. 중년 남성은 복부의 돌출 및 지방축적에 따른 둘레와 두께 항목의 증가가 두드러지므로 이를 반영한 패턴 제작이 필요할 것으로 생각된다.

• 한국의류학회지
• /
• 제27권11호
• /
• pp.1190-1197
• /
• 2003

The purpose of this study is to compare and analyze methods of women's apparel prototypes and provide for some useful fundamental data to improve the apparel prototype suitable for Korean women. Two different drafting methods, the Bunka pattern of Japan Bunka Women's University and the Secoli pattern of Italy istituto carlo secoli, an italian pattern drafting institute, were selected. The result and discussion are as follows; In the calculation formula, the Bunka was shown more comfort at arm-hole part, because of it's lower arm-hole depth, wider arm-hole width and lower cap height in comparison with the Secoli. At the shoulder angle, the Bunka is inclined more in front shoulder than the back shoulder, whereas the Secoli is inclined more in back shoulder than the front shoulder. It could explain that the Bunka is suitable for bendforward type and the Secoli is suitable for lean-back type. In the sensory test, the one-piece pattern of the Secoli with 4cm ease was highly estimated in ease. It seems young women's preference to body conscious clothes which reflected in many new elastic fabrics. At the bust point to neck, the Bunka was highly estimated, compared with the Secoli. It seems like to be caused that for the bust point to neck formula, the Bunka used bust girth, the Secoli used stature which has low correlation with the bust point to neck.

• The Journal of Advanced Prosthodontics
• /
• 제5권2호
• /
• pp.187-197
• /
• 2013

PURPOSE. The purpose of this study was to evaluate various core designs on stress distribution within zirconia crowns. MATERIALS AND METHODS. Three-dimensional finite element models, representing mandibular molars, comprising a prepared tooth, cement layer, zirconia core, and veneer porcelain were designed by computer software. The shoulder (1 mm in width) variations in core were incremental increases of 1 mm, 2 mm and 3 mm in proximal and lingual height, and buccal height respectively. To simulate masticatory force, loads of 280 N were applied from three directions (vertical, at a $45^{\circ}$ angle, and horizontal). To simulate maximum bite force, a load of 700 N was applied vertically to the crowns. Maximum principal stress (MPS) was determined for each model, loading condition, and position. RESULTS. In the maximum bite force simulation test, the MPSs on all crowns observed around the shoulder region and loading points. The compressive stresses were located in the shoulder region of the veneer-zirconia interface and at the occlusal region. In the test simulating masticatory force, the MPS was concentrated around the loading points, and the compressive stresses were located at the 3 mm height lingual shoulder region, when the load was applied horizontally. MPS increased in the shoulder region as the shoulder height increased. CONCLUSION. This study suggested that reinforced shoulder play an essential role in the success of the zirconia restoration, and veneer fracture due to occlusal loading can be prevented by proper core design, such as shoulder.