• 대한인간공학회지
• /
• 제18권1호
• /
• pp.91-108
• /
• 1999

In our previous work using a motion analyzer and 3-dimensional sonic digitizer, the arm shapes for 23 women in their early twenties were classified into three characteristic types. In order to design sleeves, suitable for arm movements for the three characteristic arm shapes, a relationship between arm length variation and shoulder/elbow angles has been investigated for four cases of arm movements (flexion, extension, adduction and abduction). Each arm movement can be characterized by the changes in shoulder angle and the changes in elbow angle at the maximal shoulder angle. In all the four cases of arm movements, the changes of shoulder length and cap height are largest at the maximal shoulder angle. These changes were little affected by changes in elbow angle. The changes in the lower arm length and the difference between cap height and upper arm length are the largest at the maximal elbow angle of the maximal shoulder angle. There is a linear relationship between cap height and shoulder angle during arm movements; thus, in designing sleeves the cap height can be determined from the regression of cap height vs. shoulder angle.

• International Journal of Human Ecology
• /
• 제13권1호
• /
• pp.117-128
• /
• 2012

This study compares the net effect of wearing different shoulder/arm armor systems on garment impediment perception and wearer acceptability. Two independent variables in this study were armor systems and shoulder/ arm movements. There were four armor systems of control garment and arm armor systems A, B, and C as well as five types of arm/shoulder movements, (shoulder flexion, should extension, shoulder abduction, shoulder horizontal flexion, and shoulder horizontal extension). Ten male volunteers wearing size medium battle dress uniform (BDU) with recent relevant military experience participated in this study. The volunteers performed shoulder/arm movements (while wearing each armor treatments) and completed the garment impediment perception as well as wearer acceptability scales. The body areas of neck side, shoulder top, and armscye front showed the highest frequency of reported impediments. Resistance to movement and localized pressure were the most frequently mentioned types of impediment. The armor system B had the most areas of impediment, and was rated as more restrictive than the control garment and armor system A for each movement. For wearer acceptability, no significant differences were found between the control garment and armor system A for all eight items; this indicated that subjects did not perceive a difference between wearing the control garment and armor system A. There was a trend for wearer acceptability to decrease from wearing the control garment to armor systems A to C to B.

• 동의생리병리학회지
• /
• 제25권1호
• /
• pp.8-18
• /
• 2011

To have effective treatment for shoulder arm pain, we searched the cause, symptom, etiology, classification of the pain areas, acupuncture points, and muscles along the meridians, and acquired the following results. Shoulder-pain is mainly divided into the malfunction of viscera and entrails, damage due to the weakness of essence and qi, abnormal status of muscle function, change of joints, disease in the nerve and vessel, and the internal injury due to seven modes of emotions. Pain of shoulder joints are pain in the local area of shoulder joints, referred pain of shoulder, neck, and shoulder-arm, numbnes and swelling of muscle, and muslce weakness. Shoulder-arm pain is classified as four types of pain: shoulder-joint pain, shoulder-back pain, shoulder-chest pain, and shoulder-arm-elbow pain. And shoulder-arm-elbow pain is again divided into the shoulder-blade pain, shoulder-arm pain, shoulder-elbow pain. The related meridians on shoulder pain are the three yin meridians of hand, Kidney Meridian, Conception Meridian, three yang meridians of hand, Bladder Meridian, Governor Meridian Acupuncture points for shoulder pain are in the acupuncture points of the 10 meridians and a-shi points. Thre related meridian muscles on shoulder-pain are the three yin and yang meridians of hand, and their related muscles are the ones that are connected with the front, back, and chest side muscles of shoulder joints, and the ones that are connected with the front and back side muscles of arm.

• 대한물리치료과학회지
• /
• 제7권2호
• /
• pp.641-651
• /
• 2000

The purpose of study is aimed at analysing the body deformity types through movement pattern of shoulder pain patients without considering of upper extremity radiating pain. This study was proceeded in a time-series method through the fifty shoulder pain patients visited the hospital for the first time. The results were as follows. 1. Body type I: Deformity style of Lt shoulder & pelvis forward tilt was 8 patirnts (16%) 2. Body type II: Deformity style of Rt shoulder & pelvis forward tilt style was 22 patirnts (44%) 3. Body type III: Deformity style of Lt shoulder & Rt pelvis forward tilt style was 9 patirnts (18%) 4. Body type IV: Deformity style of Rt shoulder & Lt pelvis forward tilt style was118 patirnts (22%).

• 로봇학회논문지
• /
• 제18권1호
• /
• pp.110-116
• /
• 2023

In this study describes the design of Exo-suit to assist those who work in unstructured positions. The present study aimed to analyze various types of work, especially those performed in unstructured postures by heavy industry workers. Based on the motion capture analysis results, an attempt was made to develop a shoulder muscle-assistive Exo-suit capable of assisting a wearer who is working using shoulder muscles. In the present study, as the first step of developing a shoulder muscle-assistive Exo-suit, different working scenarios were simulated, and the corresponding motion data were estimated using motion capture devices. The obtained motion data were reflected in the design of the Exo-suit. The main structure of the shoulder muscle-assistive Exo-suit was made of a carbon fiber-reinforced composite to obtain the weight reduction. The shoulder muscle assistive Exo-suit was designed to fully cover the range of motion for workers working in unstructured postures.

• 한국의류학회지
• /
• 제44권1호
• /
• pp.96-106
• /
• 2020

This study designed four types with a different halter-neck shoulder straps of an athleisure brassiere for women in their 20-40s as well as analyzed the shoulder strap pressure, shoulder strap position, subjective sensation, and design preference when wearing them. The design basis was to reduce the pressure at the back of the neck area, to allow the shoulder strap to pass down the neck as far as possible, and to send the anatomically sensitive side neck out as far as possible. As a result, H, which had the best subjective sensation and design preference, had the shoulder strap positioned more towards the shoulder point; in addition, the back of the neck did not pass. It was also found that the shoulder strap pressure near the neck was small. However, E, with the lowest subjective sensation, had the highest shoulder strap pressure and was placed up the neck. This confirmed that the position and pressure of the shoulder strap are variable when influencing the subjective sensation.

• 복식문화연구
• /
• 제5권4호
• /
• pp.130-158
• /
• 1997

This study outputs calculation of regression of each items for production of torso basic pattern according to 6 body types as the result of another study and intends to present drawing method of torso model by short measure method modified and supplied and supplied by experiments of wearing clothing. SAS(Statistical Analysis System) is used for figures management and methods for analysis used are Frequency Analysis, Means Analysis, Regression Analysis, Correlation Analysis, etc. Results are as follows. 1. Correlation analysis is used to output the size necessary for torso prototype drawing by sort measure method and waist front length, back length, crotch length, shoulder point-cerricale-shoulder point, bust circumference, waist circumference, weight, etc, are set up as representative items calculation of regression of each type is suggested. 2. In the result of experiment of the first wearing clothing intended for 5 in each type and the whole 30, to develop torso prototype drawing method by short measure method, as we find some problems of the shape and propriety of neck root circumference line, the position of shoulder point, pulling or hold armpit parts, waist circumference line, the degree of dissatisfaction is high, so the second experiment of wearing clothing is propriety of each part is improved, all items except the length and quantity of shoulder dart, waist in back bodice, clearance quantity of hip circumference, and the place of shoulder line in side bodice. So, it was modifed and supplied and then the third torso prototyped drawing method by shout measure method was suggested. The third prototype drawing method was suggested, by modifying and supplying.

• 한국의상디자인학회지
• /
• 제13권1호
• /
• pp.37-46
• /
• 2011

To design a beautiful hood fitting an unspecific individual, focusing on body parts such as the head, neck and shoulder requires body size and type information, which applied by physical factors like size, types, and movements, etc. These parts consist of complicated types and structures. Accurate information should be a priority due to great individual differences and low correlation with other body parts. However, there is not a lot of detailed physical information nor design methods for hood design. Therefore, the purpose of this study is to select a study sample "hood" which is a recently emerging fashion item and to expand the necessary physical information for pattern design and draw body size of wearing part on Hood like head, cerbical portion and shoulder. Extract factors to consist on types and after divided into several types, a study comparing each type's physical characteristics was conducted. In order to do that, body measurement data have been collected by statistical treatment and analyzed reference with statistical treatment. The results of the study are predicted to be important data to develop various hood designs for the recent fashion trend. Factor analysis was conducted through main composition analysis about direct measured item on human body and index items. The results of factor analysis, composed factors of body type in this research object were extracted in total of 3 factors. To categorize the head, neck and shoulders of women in their early 20s women and determine their characteristics, variances with factor analysis became operative for Cluster analysis. With these clusters, women in their early 20s were categorized into three types. The results of this study are considered to affect largely for higher physical suitability on unspecified individuals when allowed absence of reference and the fact that body size only limited to item 'head circumstance' in terms of making hat and hood in the case of recent Korea. For the future, an experimental study of hood production should be conducted by using basic data from this study.

• 패션비즈니스
• /
• 제11권4호
• /
• pp.135-151
• /
• 2007

This study is human body measurement of 200 adult males in their 20s by both direct and indirect methods in order to reveal the representative male upper body types. Composition factors of body types were classified while the combination of direct-indirect measurement values was chosen. The following are the findings: 1) The analysis of direct-indirect measurement statistics showed the following results: 173.80cm (height), 69.87kg (weight), 95.58cm (chest girth), $24.67^{\circ}$ (right shoulder angle), and $9.34^{\circ}$ (shoulder width angle). 2) The factor analysis of the body types by direct measurement produced 5 factors: 1 (front length of upper body), 2 (front length of upper body), 3 (back length of upper body), 4 (circumference of upper body), and 5 (shoulders length). These factors accounted for 90.08%. Also, the cluster analysis of factor scores led to 3 types: 1 (33%, short, comparatively wide shoulders and full in the hips), 2 (25.1%, well-developed upper body in tall, inversed triangle), 3 (41%, average height, short upper body). 3) The body-type factor analysis by indirect measurement resulted in 6 factors with the explanation of 83.24%: 1 (rear upper bady thickness), 2 (front upper body width), 3 (front chest thickness), 4 (left-right shoulder angle), 5 (front width of protrusion distance in chest and shoulders), and 6 (neck's front-rear side angle).In addition, the cluster analysis of factor scores brought about 4 types: 1 (15%, well-developed front chest, beardless waist), 2 (23.5%, flat chest, with shoulder, drooping shoulders, strait neck), 3 (39%, with shoulder, curved back), and 4 (22.5%, narrow and thin, curved waist). 4) Among the 118 subjects (75%), 58 subjects commonly appearing in indirect measurement values group and direct measurement values group were chosen the representative body type group according to asterisk indexes. They had the highest frequency in direct type 3 and indirect type 3, whose combination represented the physical characteristics of the representative body types.

• 복식문화연구
• /
• 제26권1호
• /
• pp.95-108
• /
• 2018

This study analyzed the body shape of the body of 17~19 years old female students using the SPSS 20.0 statistical program according to the 7th Korea Human Body Survey. Factor analysis was based on six factors including body size, body height, shoulder length, and width, upper body length, hip length, and shoulder inclination related factors. Through this cluster analysis, the body shape of late adolescent female student was classified into four types. Body type 1 was the highest body height factor, and the upper body length and the hip length factor were lower. It was analyzed as 'Long leg in the body'. Body type 2 is the 'narrow shoulder skinny type' with high hip and shoulder slope factors and low body size, body height, shoulder length, and width factor. Body type 3 showed body size, shoulder length, height and hip length factor, and body height factor was rather low 'low hip obese body shape'. Body type 4 was analyzed as 'lower shoulder long upper body type' with higher upper body length factor and lower body size and shoulder slope factor. It is thought that when the pattern is made, it is possible to produce excellent patterns by fitting the dimensions of the body, as well as the dimensions of the shoulder width, the slope, and the hip length.