• Title/Summary/Keyword: shot-by-shot

Search Result 1,019, Processing Time 0.025 seconds

Neural Activation in the Somatosensory Cortex by Electrotactile Stimulation of the Fingers: A Human fMRI Study

  • Seok, Ji-Woo;Jang, Un-Jung;Sohn, Jin-Hun
    • Journal of the Ergonomics Society of Korea
    • /
    • v.33 no.5
    • /
    • pp.395-405
    • /
    • 2014
  • Objective: The aim of this study is to investigate 1) somatotopic arrangement of the second and third fingers in SI area 2) difference of neural activation in the SI area produced by stimulation with different frequencies 3) correlation between the intensity of tactile perception by different stimulus intensity and the level of brain activation measurable by means of fMRI. Background: Somatosensory cortex can obtain the information of environmental stimuli about "where" (e.g., on the left palm), "what" (e.g., a book or a dog), and "how" (e.g., scrub gently or scrub roughly) to organism. However, compared to visual sense, the neural mechanism underlying the processing of specific electrotactile stimulus is still unknown. Method: 10 right-handed subjects participated in this study. Non-painful electrotactile stimuli were delivered to two different finger tips of right hand. Functional brain images were collected from 3.0T MRI using the single-shot EPI method. The scanning parameters were as follows: TR and TE were 3000, 35ms, respectively, flip angle 60, FOV $24{\times}24cm$, matrix size $64{\times}64$, slice thickness 4mm (no gap). SPM5 was used to analyze the fMRI data. Results: Significant activations produced by the stimulation were found in the SI, SII, the subcentral gyrus, the precentral gyrus, and the insula. In all participants, statistically significant activation was observed in the contralateral SI area and the bilateral SII areas by the stimulation on the fingers but ipsilaterally dominant. The SI area representing the second finger generally located in the more lateral and inferior side than that of the third finger across all the subjects. But no difference in brain area was found for the stimulation of the fingers by different frequencies. And two typical patterns were observed on the relationship between the perceived psychological intensity and the amount of voxels in the primary sensory cortex during the stimulation. Conclusion: It was possible to discriminate the representation sites in the SI by electrotactile stimulation of digit2 and digit3. But we could not find the differences of the brain areas according to different stimulation frequencies from 3 to 300Hz. Application: The results of the study can provide a deeper understanding of somatosensory cortex and offer the information for tactile display for blinds.

An Longitudinal Analysis of Changing Beliefs on the Use in IT Educatee by Elaboration Likelihood Model (정교화 가능성 모형에 의한 IT 피교육자 신용 믿음 변화의 종단분석)

  • Lee, Woong-Kyu
    • Asia pacific journal of information systems
    • /
    • v.18 no.3
    • /
    • pp.147-165
    • /
    • 2008
  • IT education can be summarized as persuading the educatee to accept IT. The persuasion is made by delivering the messages for how-to-use and where-to-use to the educatee, which leads formulation of a belief structure for using IT. Therefore, message based persuasion theory, as well as IT acceptance theories such as technology acceptance model(TAM), would play a very important role for explaining IT education. According to elaboration likelihood model(ELM) that has been considered as one of the most influential persuasion theories, people change attitude or perception by two routes, central route and peripheral route. In central route, people would think critically about issue-related arguments in an informational message. In peripheral route, subjects rely on cues regarding the target behavior with less cognitive efforts. Moreover, such persuasion process is not a one-shot program but continuous repetition with feedbacks, which leads to changing a belief structure for using IT. An educatee would get more knowledge and experiences of using IT as following an education program, and be more dependent on a central route than a peripheral route. Such change would reformulate a belief structure which is different from the intial one. The objectives of this study are the following two: First, an identification of the relationship between ELM and belief structures for using IT. Especially, we analyze the effects of message interpretation through both of central and peripheral routes on perceived usefulness which is an important explaining variable in TAM and perceived use control which have perceived ease of use and perceived controllability as sub-dimensions. Second, a longitudinal analysis of the above effects. In other words, change of the relationship between interpretation of message delivered by IT education and beliefs of IT using is analyzed longitudinally. For achievement of our objectives, we suggest a research model, which is constructed as three-layered. While first layer has a dependent variable, use intention, second one has perceived usefulness and perceived use control that has two sub-concepts, perceived ease of use and perceived controllability. Finally, third one is related with two routes in ELM, source credibility and argument quality which are operationalization of peripheral route and central route respectively. By these variables, we suggest five hypotheses. In addition to relationship among variables, we suggest two additional hypotheses, moderation effects of time in the relationships between perceived usefulness and two routes. That is, source credibility's influence on perceived usefulness is decreased as time flows, and argument quality's influence is increased. For validation of it, our research model is tested empirically. With measurements which have been validated in the other studies, we survey students in an Excel class two times for longitudinal analysis. Data Analysis is done by partial least square(PLS), which is known as an appropriate approach for multi-group comparison analysis with a small sized sample as like this study. In result. all hypotheses are statistically supported. One of theoretical contributions in this study is an analysis of IT education based on ELM and TAM which are considered as important theories in psychology and IS theories respectively. A longitudinal analysis by comparison between two surveys based on PLS is also considered as a methodological contribution. In practice, finding the importance of peripheral route in early stage of IT education should be notable.

Changes of Ground Reaction Forces by the Change of Club Length in Golf Swing (클럽의 길이 변화에 따른 골프 스윙의 지면반력 변화)

  • Sung, Rak-Joon
    • Korean Journal of Applied Biomechanics
    • /
    • v.17 no.2
    • /
    • pp.31-40
    • /
    • 2007
  • Proper weight shifting is essential for a successful shot in golf swing and this could be described by means of the ground forces between the feet and ground. It is assumed that the ground forces would different according to the club used because the length and swing weight of each club is different. But, in present, it is not clear what changes are made by the change of clubs and this affect the swing motion. Therefore this study focused on the investigation of the changes of the ground forces and ground reaction forces (GRF) by the change of club length. The subjects were three professional male golfers. Four swings (driver, iron 3, iron 5, and iron 7) for each subject were taken by two high speed video cameras and two AMTI force platforms were used to measure the GRF simultaneously. Kwon GRF 2.0 and Mathcad 13 software were used to post processing the data. Changes of the three major component of GRF (Vertical, lateral, anterior-posterior force) at 10 predefined events were analyzed including the maximum. Major findings of this study were as follows. 1. Vertical forces; - There were no significant changes until the top of backswing. - Maximum was occurred at the club horizontal position in the downswing for both feet. The shorter club produced more maximum forces than longer ones in the left foot, but reverse were true for the right foot. - Maximum forces at impact shows the same patterns. 2. Lateral forces; Maximum was occurred at the club horizontal position for both feet, but there were no lateral forces because the direction of two forces was different. Maximum force pattern by different clubs was same as the vertical component. 3. Anterior-posterior forces; - This component made a counter-clock wise moment about a vertical axis located between two foot until the club vertical position was reached during the backswing, and reverse moment were produced when the club reached horizontal at the downswing. - Also this component made a forward moment about a horizontal axis located in the CG during the fore half of the downswing, and a reverse moment until the club reached vertical at the follow through phase. Maximum was occurred at the club vertical in the downswing for both feet. The longer club produced more maximum forces than shorter ones for both feet.

Improvement of duty rate of Meteor Burst communication with Buried Antenna (매설형 안테나를 이용한 유성 버스트 통신의 도통율 개선)

  • 김병철;이영철;김기채
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 1999.05a
    • /
    • pp.254-260
    • /
    • 1999
  • Meteor Burst Communication can provide effective and economical means of communication where long distance VHF NLOS data transmission is needed; often ranges more than 1000 km. It has been, however, so far considered unsuitable for short distance application because of phenomenal decrease in burst durations, which leads to decreation of total duty rate of the system. This paper extensively analyzes characteristics of shot distance MB(Meteor Burst) path and shows the low duty rate may be improved by increasing burst rate through adapting antenna beam width to cover entire hot-spot region in the space and, by compensating effective burst length through cutting down man-made noises introduced by antenna. Based on the analysis, we are developed a small-opening-cavity antenna, especially designed for short distance MB path. In operation, the antenna is to be buried under ground surface so as to improve directivity and reduces noise introduction. The antenna exhibits power gain of 3 dB with 90 degree beam width and thus enables to illuminate entire hot-spot regions with the elevation angle of 8-90 degree which is the case of transmission less than 100 km. Directivity horizontal to earth surface is suppressed to minimum which enables to cut man-made noises from near-by sources down to more than 3 dB from the level reported with conventional 4 element Yagi. A series of experiments performed on 100 km MB paths have conformed that, with the antenna installed at receiving site, the burst rate and duration time have been noticed to increase by 10 and 20 percent respectively from the values obtained by conventional 4-element Yagi antenna under same testing condition.

  • PDF

Improvement of Short Range Performance of Meteor Burst Path with Buried Antenna (지하 매설형 안테나를 이용한 근거리 유성 버스트 통신의 특성개선)

  • 김병철;김기채;이무영
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.9 no.6
    • /
    • pp.788-801
    • /
    • 1998
  • Meteor Burst Communication can provide effective and economical means of communication where long distance VHF NLOS data transmission is needed ; often ranges more than 1000 km. It has been, however, so far considered unsuitable for short distance application because of phenomenal decrease in burst durations, which leads to decreation of total duty rate of the system. This paper extensively analyzes characteristics of shot distance MB(Meteor Burst) path and shows the low duty rate may be improved by increasing burst rate through adapting antennal beam width to cover entire hot-spot region in the space and, by compensating effective burst length throughcutting down man-made noises introduced by antennal. Based on the analysis, we are developed a small-opening-cavity antennal, especially designed for short distance MB path. In operation, the antenna is to be buried under ground surface so as to improve directivity and reduces noise introduction. The antennal exhibits power gain of 3 dB with 90 degree beam width and thus enables to illuminate entire hot-spot regions with the elevation angle of 8-90 degree which is the case of transmission less than 100 km. Directivity horizontal to earth surface is suppressed to minimum which enables to cut man-made noises from near-by sources down to more than 3 dB from the level reported with conventional 4 element Yagi. A series of experiments performed on 100km MB paths have conformed that, with the antenna installed at receiving site, the burst rate and duration time have been noticed to increase by 10 and 20 percent respectively from the values obtained by conventional 4-element Yagi antennal under same testing condition.

  • PDF

A Fast Background Subtraction Method Robust to High Traffic and Rapid Illumination Changes (많은 통행량과 조명 변화에 강인한 빠른 배경 모델링 방법)

  • Lee, Gwang-Gook;Kim, Jae-Jun;Kim, Whoi-Yul
    • Journal of Korea Multimedia Society
    • /
    • v.13 no.3
    • /
    • pp.417-429
    • /
    • 2010
  • Though background subtraction has been widely studied for last decades, it is still a poorly solved problem especially when it meets real environments. In this paper, we first address some common problems for background subtraction that occur in real environments and then those problems are resolved by improving an existing GMM-based background modeling method. First, to achieve low computations, fixed point operations are used. Because background model usually does not require high precision of variables, we can reduce the computation time while maintaining its accuracy by adopting fixed point operations rather than floating point operations. Secondly, to avoid erroneous backgrounds that are induced by high pedestrian traffic, static levels of pixels are examined using shot-time statistics of pixel history. By using a lower learning rate for non-static pixels, we can preserve valid backgrounds even for busy scenes where foregrounds dominate. Finally, to adapt rapid illumination changes, we estimated the intensity change between two consecutive frames as a linear transform and compensated learned background models according to the estimated transform. By applying the fixed point operation to existing GMM-based method, it was able to reduce the computation time to about 30% of the original processing time. Also, experiments on a real video with high pedestrian traffic showed that our proposed method improves the previous background modeling methods by 20% in detection rate and 5~10% in false alarm rate.

A Study on Durability Improvement of Breech Block for 30mm Automatic Gun (30mm 자동포용 폐쇄기의 내구성 향상에 관한 연구)

  • Park, Young Min;Kim, Sung Hoon;Noh, Sang Wan;Kim, Sung Jin
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.5
    • /
    • pp.47-53
    • /
    • 2020
  • The purpose of this study was to increase product reliability by improving the durability of the breech block for a 30mm Automatic Gun. The breech block is a key component of a gun that functions as chambering, closing, and extracting. The breech block requires high reliability, which needs to be improved because cracks of a breech block can occur early in operation. Cause analysis confirmed that the crack is caused by repeated impacts. Therefore, the following improvement measures were studied, and the effects were demonstrated using a firing test. The energy of impact absorption was increased by changing the material, and the stress concentration was mitigated by increasing the value of R. In addition, the fatigue life was increased by adding Shot-peening, deleting chromium plating, and changing the forging method. The firing test did not show firing trouble for up to 5,000 rounds. The start timing of the crack was delayed, and the depth was small. Therefore, the improved product was more durable than the existing product. This study can be used as a useful reference when assessing the improvement of the durability of similar products, life study, and criteria for crack acceptance.

A Study on Narrative by the Control of the Time: Focused on the Analysis of the Trailer for Dead Island (시간의 조정을 통한 내러티브 연구 : <데드 아일랜드> 예고편 분석을 중심으로)

  • Roh, Chul-Hwan
    • Cartoon and Animation Studies
    • /
    • s.40
    • /
    • pp.397-421
    • /
    • 2015
  • Aristotle's Poetics is the earliest work of dramaturgy. It explains some of the most important narrative notions, for example, Mimesis, Katharsis, Mythos(Plot), Ethos(Character), Anagnorisis and Peripeteia. etc. Aristotle considered the plot which is the arrangement of events, as the most important element of drama. This paper presents an example of a plot configuration as an alternative to the traditional narration used since Aristotle. Dead Island, developed by Techland and published by Deep Silver, is one of the most successful action role-playing survival zombie video games. Its trailer, the Winner of Gold Prize for Internet Film at Cannes Lions International Festival of Creativity in 2011. Since the purpose of the trailer is to attract the audiences/gamers to the film/game, it has generally a similer narrative method from its own works. But Dead Island trailer is different. We treat this trailer as an short animation. It could be a new example of the non-linear narrative by the control of the time for example, temporal arrangement, direction and speed. We analyse all shots of Dead Island's trailer with Poetics' rules and with $G{\acute{e}}rard$ Genette's some narrative notions for example temporal order and duration. Furthermore we look for how to maximize the audiences' curiosity by the adjustment of the time, combined with its shocking images.

A new method for determining OBS positions for crustal structure studies, using airgun shots and precise bathymetric data (지각구조 연구에서 에어건 발파와 정밀 수심 자료를 이용한 OBS 위치 결정의 새로운 방법)

  • Oshida, Atsushi;Kubota, Ryuji;Nishiyama, Eiichiro;Ando, Jun;Kasahara, Junzo;Nishizawa, Azusa;Kaneda, Kentaro
    • Geophysics and Geophysical Exploration
    • /
    • v.11 no.1
    • /
    • pp.15-25
    • /
    • 2008
  • Ocean-bottom seismometer (OBS) positions are one of the key parameters in an OBS-airgun seismic survey for crustal structure study. To improve the quality of these parameters, we have developed a new method of determining OBS positions, using airgun shot data and bathymetric data in addition to available distance measurements by acoustic transponders. The traveltimes of direct water waves emitted by airgun shots and recorded by OBSs are used as important information for determining OBS locations, in cases where there are few acoustic transponder data (<3 sites). The new method consists of two steps. A global search is performed as the first step, to find nodes of the bathymetric grid that are the closest to explaining the observed direct water-wave traveltimes from airgun shots, and acoustic ranging using a transponder system. The use of precise 2D bathymetric data is most important if the bottom topography near the OBS is extremely rough. The locations of the nodes obtained by the first step are used as initial values for the second step, to avoid falling into local convergence minima. In the second step, a non-linear inverse method is executed. If the OBS internal clock shows large drift, a secondary correction for the OBS internal clock is obtained, as well as the OBS location, as final results by this method. We discuss the error and the influence of each measurement used in the determination of OBS location.

Analysis of Color Error and Distortion Pattern in Underwater images (수중 영상의 색상 오차 및 왜곡 패턴 분석)

  • Jeong Yeop Kim
    • Journal of Platform Technology
    • /
    • v.12 no.3
    • /
    • pp.16-26
    • /
    • 2024
  • Videos shot underwater are known to have significant color distortion. Typical causes are backscattering by floating objects and attenuation of red colors in proportion to the depth of the water. In this paper, we aim to analyze color correction performance and color distortion patterns for images taken underwater. Backscattering and attenuation caused by suspended matter will be discussed in the next study. In this study, based on the DeepSeeColor model proposed by Jamieson et al., we verify color correction performance and analyze the pattern of color distortion according to changes in water depth. The input images were taken in the US Virgin Islands by Jamieson et al., and out of 1,190 images, 330 images including color charts were used. Color correction performance was expressed as angular error using the input image and the correction image using the DeepSeeColor model. Jamieson et al. calculated the angular error using only black and white patches among the color charts, so they were unable to provide an accurate analysis of overall color distortion. In this paper, the color correction error was calculated targeting the entire color chart patch, so an appropriate degree of color distortion can be suggested. Since the input image of the DeepSeeColor model has a depth of 1 to 8, color distortion patterns according to depth changes can be analyzed. In general, the deeper the depth, the greater the attenuation of red colors. Color distortion due to depth changes was modeled in the form of scale and offset movement to predict distortion due to depth changes. As the depth increases, the scale for color correction increases and the offset decreases. The color correction performance using the proposed method was improved by 41.5% compared to the conventional method.

  • PDF