• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2002.05a
• /
• pp.17-25
• /
• 2002

Application of electrical stimulation in the red meat species (eg. beef and sheep) processing has been erratic around the world and this may reflect an incomplete knowledge of how to optimise the technology. Although it is well established that stimulation increases the rate of post-mortem glycolysis other biochemical and biophysical effects have been implicated with the use of this technology. On the basis of currently available knowledge, this mini-review seeks to examine the current theories about the effect of stimulation on post-mortem muscle. The classical view that stimulation prevents muscle from shortening excessively during rigor development has been expanded to include the possibility that it also results in physical disruption of muscle structure. The interaction of these effects with the acceleration of the rate of proteolysis through activation of the calpain protease system has not been comprehensively reviewed in the past. As a result of conclusion driven, this article highlights several areas that may prove fruitful for further research. The challenge for further development of electrical stimulation systems is optimisation of the activation of the enzyme systems in parallel with manipulation of chilling regimes so as to ensure rigor mortis is achieved at temperatures which minimise shortening. The potential of regional stimulation of sections of the carcass to achieve this outcome is worthy of study given the different fibre composition of muscles and temperature gradients.

• Phonetics and Speech Sciences
• /
• v.3 no.3
• /
• pp.3-10
• /
• 2011

This study examined the production of aspirated stop consonants in Korean and English words to address how the influences differed particularly in terms of proficiency in L2 English. Voice onset times (VOTs) were measured from two American monolinguals and seven Korean speakers. The results showed that VOT patterns for both L1 and L2 stops differed according to their proficiency in L2 English. In L2 English, high proficient speakers produced VOTs that were similar to those of native speakers of English whereas low proficient speakers produced VOTs that were significantly longer than those of proficient speakers. In L1 Korean and L2 English, most of the proficient speakers produced VOTs similarly. Unlike previous findings, Korean VOTs were even shorter than English counterparts. The VOT shortening of aspirated stops in Korean was found for most of the proficient speakers. The findings of the present study suggest that cross language phonetic influences as well as the ongoing VOT shortening in Korean aspirated stops may be correlated with L2 proficiency. Since this is a pilot study with a small number of subjects for each proficiency group, further quantitative study is necessary to generalize.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1075-1088
• /
• 1992

This paper presents techniques used to model a two arm experimental robot. Both arms are compliant and the robot operates in a vertical plane and is therefore influenced by gravity. The robot is being built to study different control strategies for robots containing compliant members. The system is built with extremely flexible members. This limits the required bandwidth of the control electronics, and mimics the flexible motions that are observed for stiffer faster robots. The objective of this paper is to develop a reduced order model of the robot system and to experimentally validate the model. Validation requires that the model includes gravitational effects. Therefore, an assumed modes model is developed which facilitates modeling of gravitational effects. In order to select the order and mode shapes for the model, an analytical solution is derived for a linearized continuous model. This is compared to the assumed modes model to determine the number of mode shapes needed to model the system. The final model, which includes shortening effects, correlates very well with experimental results.

• Phonetics and Speech Sciences
• /
• v.1 no.1
• /
• pp.41-46
• /
• 2009

Duration of the preceding vowel is known to vary as a function of the (phonological or phonetic) voicing feature of the following consonant. This study raises a question against this general belief. A spectrographic experiment using 14 Korean obstruents (three sets of stops: /p, p', $p^h$/, /t, t', $t^h$/, /k, k', $k^h$/; one set of affricates: /c, c', $c^h$/; one set of fricatives: /s, s'/) reveals that (1) phonetic voicing in the intervocalic lax consonants /p, t, k, c, s/ has nothing to do with the duration of the preceding vowel; (2) vowel length is significantly shorter before tense consonants than before their lax cognates while tense consonants are significantly longer than their lax cognates. Importantly, Korean obstruents are all phonologically voiceless. Therefore, the voicing feature is rejected as the cause of preconsonantal vowel shortening in Korean both phonetically and phonologically. It is suggested that the temporal phenomenon is basically a kind of physiologically-motivated coarticulation though it is restricted by the phonology of a given language. To meet this assumption, the feature voicing should be replaced with the feature tenseness as the cause, which will enable us to explain the temporal phenomenon on the same basis irrespective of language.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.91-94
• /
• 2006

The way to shorten a construction period is considered to an very important technology development element as reducing the formwork removal periods with promoting strength revelation own concrete. This study executed experiment to review usability of early strength revelation chemical admixture which is judged in ways effective with premature removal of form about concrete. Use of early strength revelation AE water reducin admixture is apperaing so that strength revelation by early hydration promotions is excellent. The results of being applied proposed work process are that compressive strength are appeared more than 5MPa within 16 hours so that removal of vertical form was possible. the concrete compressive strength satisfied with a more than 2/3 of specified concrete strength for removal of horizontal form are appeared in 42 hours of 27 MPa proportioning strength, in 36 hours of 30, 35 MPa proportioning strength so that the 6 days cycle time of concrete structural frame work is cut by 2 days as shortening delayed period in works of removing slab forms. So construction cost reductions and a construction period shortening are judged so that it is possible.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.157-160
• /
• 2009

The decision of the Form removal time which leads the early assuring strength of the concrete from Apartment construction is the fact which is important from Reducing the period of works and the economical efficiency side. Especially, with Complex building of recent times the same Tall building and Multiple Apartment Site which only follows in upgrade of interior construction of apartment site and shortening the frame construction period becomes very, importantly is the actual condition where the effort which is various for this is attempted. But is caused by with limit and economical efficiency problem of case concrete early strength revelation of most and is not put to practical use is the actual condition. Develops concrete mixture which is a utility from the research which sees hereupon and the effect which is economic leads construction duration shortening under maximizing boil.

• Steel and Composite Structures
• /
• v.27 no.2
• /
• pp.229-242
• /
• 2018

High strength steel is widely used in industrial applications to improve the load-bearing capacity and reduce the overall weight and cost. To take advantage of the benefits of this type of steel in construction, an innovative hybrid fabricated member consisting of high strength steel tubes welded to mild steel plates has recently been developed. Component-scale uniaxial and multiaxial cyclic experiments have been conducted with simultaneous constant or varying axial compression loads using a multi-axial substructure testing facility. The structural interaction of high strength steel tubes with mild steel plates is investigated in terms of member capacity, strength and stiffness deterioration and the development of plastic hinges. The deterioration parameters of hybrid specimens are calibrated and compared against those of conventional steel specimens. Effect of varying axial force and loading direction on the hysteretic deterioration model, failure modes and axial shortening is also studied. Plate and tube elements in hybrid members interact such that the high strength steel is kept within its ultimate strain range to prevent sudden fracture due to its low ultimate to yield strain ratio while the ductile performance of plate governs the global failure mechanism. High strength material also significantly reduces the axial shortening in columns which prevents undesirable frame deformations.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.1046-1053
• /
• 1999

The musculotendon model is presented to show the declines in muscle force and shortening velocity during muscle fatigue due to the repeated functional electrical stimulation (FES). It consists of the nonlinear activation and contraction dynamics including physiological concepts of muscle fatigue. The activation dynamics represents $Ca^{2+}$ binding and unbinding mechanism with troponins of cross-bridges in sarcoplasm. It has the constant binding rate or activation time constant and two step nonlinear unbinding rate or inactivation time constant. The contraction dynamics is the modified Hill type model to represent muscle force - length and muscle force - velocity relations. A muscle fatigue profile as a function of the intracellular acidification, pH is applied into the contraction dynamics to represent the force decline. The computer simulation shows that muscle force and shortening velocity decline in stimulation time. And we validate the model. The model can predicts the proper muscle force without changing its parameters even when existing the estimation errors of the optimal fiber length. The change in the estimate of the optimal fiber length has an effect only on muscle time constant in transient period not on the tetanic force in the steady-state and relaxation periods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.224-230
• /
• 2006

As business competition gets together, there is much pressure on product development service organizations and manufacturing to become more productive and efficient. Product developers need to create innovative products in less time, even though the products may be very complex. To get this purpose, Six sigma methodology can be used. Six sigma is a strategic approach that works across all processes, all products, and all industries. The purpose of this paper is to develop the innovation strategy for shortening the lead time of the new product using six sigma method.

• Korean Journal of Veterinary Research
• /
• v.23 no.1
• /
• pp.123-128
• /
• 1983

This study was conducted to evaluate the modified drug sensitivity test for the shortening of detection time and clinical application. The results obtained were summarized as follows. 1. Inhibitory zone in 6 strains of Staphylococcus and Escherichia coli tested to sensitivity teat were reached at 100% between 2 and 6 hours. 2. The sensitivity test of Staphylococcus A, B and E. coli No. 2, No. 3 to antibacterial ointment drugs were strong positive(+++), but Staphylococcus A. A. and E. coli No. 1 were mild resistant(+). 3. The sensitivity test of Staphylococcus A. B and E. coli No. 2, No. 3 to antibacterial injection drugs in 6 hours after treatment were strong positive(+++), and Staphylococcus A. A. and E. coli No. 1 were moderate positive(++). 4. This modified method was detected 86% degree of sensitive between 7 to 12 hours after treatment. 5. We think this modified method was more practical compare to other methods.