• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.3
• /
• pp.165-171
• /
• 2013

The fact that tidal residuals are detected greatly at the tide-dominated region implies that tide component has still remained in the tidal residual. Auto-correlation function analysis also show that the auto-correlation coefficients are conspicuous near tidal periods at the Western Coast. A wavelet method was used to analyze characteristics of the short period or tide-relevant residuals. Considering the results that tidal period is prominent at the tide-dominated region, that seasonal variation is trivial at the short periods, and that shallow tidal period is conspicuous at Mokpo, the short period can be considered to be correlated with tide modulated surge. The result also shows short period components stem mainly from tide-forecasting error and tide-surge interaction. Thus tide modulated surge must be distinguished from meteorological surge.

• Journal of Astronomy and Space Sciences
• /
• v.13 no.1
• /
• pp.72-78
• /
• 1996

We evaluated the orbital elements of BV light curves of a short period RS CVn type eclipsing binary system UV Picsium that shows complication light variation, by analyzing with the Winson-Devinney's differential correction method. Because the analyzed light curves shows large light variation at outside eclipse region, we assumed spotted region of the primary component and calculated its position and size. The results show the UV Psc is a detached binary system of nearly the same radii and the primary component has high mass with high temperature. However this result is not consistant with customary stellar models, thus requires more observational data to confirm this problem.

• The Journal of the Korea Contents Association
• /
• v.2 no.4
• /
• pp.59-66
• /
• 2002

As for the software development, it is complicated, and size of software is growing larger. And contraction of a software development period is required acutely because it is short a period of software life cycle. Also, it becomes harder development and a maintenance because it is short a life cycle of developed software. According to this an effort is increased in order to reduce a development cost and time as using a component to have been implemented previously in development of software. A current component technology is developing into a very fast speed and is bringing a large change into development of a Web base system in addition to existing software development method. In this paper, we were handling a related technology for Web system development of a CBD base systematically and derived an issue to apply it to development of a Web system and presented an efficient practical use method of a component technology. First of all we looked into a component technology and a CBD methodology systematically and described a component technology in Web. Also, we proposed a method to increase development and efficiency of practical use of a Web system based on a component. The this study result can decrease a development cost of a Web system and a load of maintenance management through the re-use of a code.

• Journal of Aquaculture
• /
• v.10 no.2
• /
• pp.189-197
• /
• 1997

A series of short (8 hours) and long term (96 hours) exposure studies was conducted on a laboratory scale to evaluation (1) the threshold concentrations of petroleum hydrocarbon in seawater which can lead to tainting problems in yellow tail (Seriola quinqueradiata) and (2) the time to recover (depuration period) once the tainting has occurred. The water-soluble fraction (WSF) of crude oil was prepared by stirring the oil with cold seawater. The main component of the WSF were low-boiling aromatics, although these were only al small proportion of the starting oil. From the sencory evaluation it was concluded that the threshold hydrocarbon levels in seawater which will impart a taint in yellow tail fillets within a 8-hour exposure period (short exposure period) are in the range of 0.4 to 1.0 ppm and within a 96-hour exposure period (long exposure period) are in the range of 0.2 to 0.5 ppm. Depuration trials were carried out with WSF from crude oil. The fish were exposed for 48 hours to concentration of 2.5 ppm hydrocarbons. After 48-hour exposure period, the fish were allowed to depurate in fresh, uncontaminated seawater. Depuration time for these fish was 10 days. The taste panelists were able to detect the contaminated fillets very easily while the depurated fish could not be distiguished from the control.

• Earthquakes and Structures
• /
• v.7 no.1
• /
• pp.83-99
• /
• 2014

This study is devoted to estimate higher-mode effects for multi-story structures with considering soil-structure interaction subjected to decomposed parts of near-fault ground motions. The soil beneath the super-structure is simulated based on the Cone model concept. Two-dimensional structural models of 5, 15, and 25-story shear buildings are idealized by using nonlinear stick models. The ratio of base shears for the soil-MDOF structure system to those obtained from the equivalent soil-SDOF structure system is selected as an estimator to quantify the higher-mode effects. The results demonstrate that the trend of higher-mode effects is regular for pulse component and has a descending variation with respect to the pulse period, whereas an erratic pattern is obtained for high-frequency component. Moreover, the effect of pulse component on higher modes is more significant than high-frequency part for very short-period pulses and as the pulse period increases this phenomenon becomes vice-versa. SSI mechanism increases the higher-mode effects for both pulse and high-frequency components and slenderizing the super-structure amplifies such effects. Furthermore, for low story ductility ranges, increasing nonlinearity level leads to intensify the higher-mode effects; however, for high story ductility, such effects mitigates.

• Earthquakes and Structures
• /
• v.5 no.1
• /
• pp.49-65
• /
• 2013

This article presents the statistical characteristics of elastic floor acceleration spectra that represent the peak response demand of non-structural components attached to a nonlinear supporting frame. For this purpose, a set of stiff and flexible general moment resisting frames with periods of 0.3-3.6 sec. are analyzed using forty-nine near-field strong ground motion records. Peak accelerations are derived for each single degree of freedom non-structural component, supported by the above mentioned frames, through a direct-integration time-history analysis. These accelerations are obtained by Floor Acceleration Response Spectrum (FARS) method. They are statistically analyzed in the next step to achieve a better understanding of their height-wise distributions. The factors that affect FARS values are found in the relevant state of the art. Here, they are summarized to evaluate the amplification and/or reduction of FARS values especially when the supporting structures undergo inelastic behavior. The properties of FARS values are studied in three regions: long-period, fundamental-period and short-period. Maximum elastic acceleration response of non-structural component, mounted on inelastic frames, depends on the following factors: inelasticity intensity and modal periods of supporting structure; natural period, damping ratio and location of non-structural component. The FARS values, corresponded to the modal periods of supporting structure, are strongly reduced beyond elastic domain. However, they could be amplified in the transferring period domain between the mentioned modal periods. In the next step, the amplification and/or reduction of FARS values, caused by inelastic behavior of supporting structure, are calculated. A parameter called the response acceleration reduction factor ($R_{acc}$), has been previously used for far-field earthquakes. The feasibility of extending this parameter for near-field motions is focused here, suggested repeatedly in the relevant sources. The nonlinearity of supporting structure is included in ($R_{acc}$) for better estimation of maximum non-structural component absolute acceleration demand, which is ordinarily neglected in the seismic design provisions.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.548-552
• /
• 2002

The necessity of a short period of software development with lower cost came out. The reason of making the component based development is that it can improve the software development , productivity maintenance , and software quality innovatively. Following these advantages of component based application development methods, we found the COM based components effective to Window platform in the satellite surveying. In this paper, we can obtain many precious engineering experiences. Software system development and maintenance will take much shorter time with higher reusability if satellite surveying system is constructed with component extraction proposed by us.

• Journal of radiological science and technology
• /
• v.43 no.5
• /
• pp.389-395
• /
• 2020

The evaluation of radioactivated components of heavy-ion accelerator facilities affects the safety of radiation management and the exposure dose for workers. and this is an important issue when predicting the disposal cost of waste during maintenance and dismantling of accelerator facilities. In this study, the FLUKA code was used to simulate the proton treatment device nozzle and classify the radio-nuclides and total radioactivity generated by each component over a short period of time. The source term was evaluated using NIST reference beam data, and the neutron flux generated for each component was calculated using the evaluated beam data. Radioactive isotopes caused by generated neutrons were compared and evaluated using nuclide information from the International Radiation Protection Association and the Korea Radioisotope association. Most of the nuclides produced form of beta rays and electron capture, and short-lived nuclides dominated. However, In the case of ⁵⁴Mn, which is a radioactive product of iron, the effect of gamma rays should be considered. In the case of tritium generated from a material with a low atomic number, it is considered that handling care should be taken due to its long half-life.

• Journal of The Korean Astronomical Society
• /
• v.48 no.6
• /
• pp.325-331
• /
• 2015

We study an association between the duration of solar activity and characteristics of the latitude distribution of sunspots by means of center-of-latitude (COL) of sunspots observed during the period from 1878 to 2008 spanning solar cycles 12 to 23. We first calculate COL by taking the area-weighted mean latitude of sunspots for each calendar month to determine the latitudinal distribution of COL of sunspots appearing in the long and short cycles separately. The data set for the long solar cycles consists of the solar cycles 12, 13, 14, 20, and 23. The short solar cycles include the solar cycles 15, 16, 17, 18, 19, 21, and 22. We then fit a double Gaussian function to compare properties of the latitudinal distribution resulting from the two data sets. Our main findings are as follows: (1) The main component of the double Gaussian function does not show any significant change in the central position and in the full-width-at-half-maximum (FWHM), except in the amplitude. They are all centered at ~ 11° with FWHM of ~ 5°. (2) The secondary component of the double Gaussian function at higher latitudes seems to differ in that even though their width remains fixed at ~ 4°, their central position peaks at ~ 22.1° for the short cycles and at ~ 20.7° for the long cycles with quite small errors. (3) No significant correlation could be established between the duration of an individual cycle and the parameters of the double Gaussian. Finally, we conclude by briefly discussing the implications of these findings on the issue of the cycle 4 concerning a lost cycle.

• The KIPS Transactions:PartD
• /
• v.9D no.4
• /
• pp.613-618
• /
• 2002

The component-based development methodology becomes famous as the new technology for reuse. That technology can help us easily develop a complex and large system by composing reusable components in short period with high-quality and low-cost. The component-based system nay be developed by composing more than one component. So, the quality of component-based system is determined by individual component duality. Therefore, it is necessary to measure individual component quality for the improvement in quality of component-based system. Hence, in this paper, we propose new component metrics for measuring the cohesion as relationship between classes and interfaces or among classes. Those can be applied in the early stage of software development life cycle. So, we can measure the functional cohesion of component which will be developed. Predicting functional independence of a component, we expect to reduce the software developing cost & effort and improve software quality by reusing a component.