• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.1010-1019
• /
• 2006

CAD system is a very important technology in designing the products which we are using today. This CAD technology has been enlarging its area into 3D CAD systems with the development of computer graphics technologies. In particular, such advances have been realized in special area such as the CAD system for designing shoes. However, because it is difficult to design a 3D CAD system, most CAD developments except for major CAD software companies usually have employed the AutoCAD which realizes 3D concepts. Also, many shoes' designers have been skilled with 2D shoe CAD systems and then they can make high achievements. Therefore, we design a new shoe CAD system with advantages of 2D CAD system and 3D CAD system. We also implement the scheme to transfer the data between 2D CAD system and 3D CAD system and also grading technologies to get patterns of various shoes size from a basic shoe's design.

• Fashion & Textile Research Journal
• /
• v.14 no.3
• /
• pp.448-453
• /
• 2012

This study aims to categorize age groups for shoes manufacturing including shoes size and boot tree development for Koreans. In order to carry out the research, the characteristics of different parts of foot in relation to size are analyzed according to age and sex, making use of human body measurement database. As a result of statistical analysis, it was found that the measurement items such as foot length, metatarsal tibiale, foot breadth and instep circumference of a person reached the range of standard deviation and average numerical figures of an adult group (18-24) from the age of 14 in men's case, and from 12 for women's case, which indicates the time of completion of their foot growth. Based on these findings where males of 14 years old and females of 12 are within similar measurement range to adults, it is necessary to categorize the age groups for shoe sizing system into the following four groups: males 13 years old or under, males 14 years old or over, females 11 years or under, and females 12 years or over. The proportional measurement produced by dividing each measurement item of foot parts by foot length was compared in an independent samples t-test, and there were meaningful differences according to different foot shapes of the two age groups of males 13 or under - males 14 or over, and females 11 or under - females 12 or over. Also, the independent samples t-test for the age groups of males 13 or under - females 11 or under, and males 14 or over - female 12 or over, showed similar meaningful differences, which indicates the differences in foot shapes of male and female during the period of growth.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.2
• /
• pp.1-12
• /
• 2004

The purposes of this study were to investigate the relationship between anthropometric data of foot and other body sizes. to categorize the foot shape of elementary school boys and to find out determinant factors related the foot that enable us to deduce the foot shape and size for the design of more comfortable shoes. Subjects of this study were 249 elementary school boys of age ranged from 6 to 11 residing Seoul and lncheon area. Anthropometric sizes were measured with the direct measurement method using Martin scales and the indirect measurement method using digital photos. Pearson's correlation, factor analysis. cluster analysis. analysis of variance, post-hoc test, and cross tabs were performed for statistical analysis of the data by SPSS program. From the investigation on the relationship between foot-related items and body items, most items of foot measure were significantly related to body size items. However, angle of the foot did not related to other body sizes although other height items and mass items of the foot did have relationships with other body sizes. Results of ANOVA indicated there were significant differences in foot-related items except for items of foot angle and all body anthropometric items by subjects' age. This implicates big toe angle, little toe angle and foot ratio factors are required in sizing shoes besides foot length. On the basis of cluster analysis using factor scores. three different foot shapes were categorized. Type 1 was large and wide foot, Type 2 was small and narrow foot with large toe angle. and Type 3 was medium foot with no deformity on big toe. These three groups show significant differences in almost all measurement items. However, Rorher index and foot angle didn't show any significant differences among groups. This implicates the foot shape can be a determinant of shoe size.

• Journal of Internet Computing and Services
• /
• v.21 no.6
• /
• pp.41-50
• /
• 2020

The consequences of wearing high heels can be different according to the heel height, gait speed, shoe design, heel base area, and shoe size. This study aimed to focus on the knee extension and flexion range of motion (ROM) during gait, which were challenged by wearing five different shoe heel types and two different self-selected gait speeds (comfortable and fast) as experimental conditions. Measurement standards of knee extension and flexion ROM were individually calibrated at the time of heel strike, mid-stance, toe-off, and stance phase based on the 2-minute video recordings of each gait condition. Seven healthy young women (20.7 ± 0.8 years) participated and they were asked to walk on a treadmill wearing the five given shoes at a self-selected comfortable speed (average of 2.4 ± 0.3 km/h) and a fast speed (average of 5.1 ± 0.2 km/h) in a random order. All of the shoes were in size 23.5 cm. Three of the given shoes were 9.0 cm in height, the other two were flat shoes and sneakers. A motion capture software (Kinovea 0.8.27) was used to measure the kinematic data; changes in the knee angles during each gait. During fast speed gait, the knee extension angles at heel strike and mid-stance were significantly decreased in all of the 3 high heels (p<0.05). The results revealed that fast gait speed causes knee flexion angle to significantly increase at toe-off in all five types of shoes. However, there was a significant difference in both the knee flexion and extension angles when the gait in stiletto heels and flat shoes were compared in fast gait condition (p<0.05). This showed that walking fast in high heels leads to abnormal knee ROM and thus can cause damages to the knee joints. The findings in this preliminary study can be a basis for future studies on the kinematic changes in the lower extremity during gait and for the analysis of causes and preventive methods for musculoskeletal injuries related to wearing high heels.

• Journal of International Academy of Physical Therapy Research
• /
• v.8 no.1
• /
• pp.1084-1089
• /
• 2017

The purpose of this study was to compare and analyze the difference of the ankle joint movements during landing. Seven adult males voluntarily participated in the study and the average foot size of the subjects was 269.8 mm. Image analysis equipment and the ground reaction force plate (landing type) was used to measure th kinetic variables. As a result of this study, it was confirmed that the vertical ground reaction force peak point appeared once in the barefoot with forefoot, while two peak points appeared in the barefoot and functional shoe foot with rear foot landing. About ankle angle, fore foot landing ankle angle, the average with bare foot landing was $-10.302^{\circ}$ and the average with functional shoe foot landing was $-2.919^{\circ}$. Also about rear foot landing, ankle angle was $11.648^{\circ}$ with bare foot landing and $15.994^{\circ}$ with functional shoe landing. The fore foot landing, ankle joint force analysis produced 1423.966N with barefoot and 1493.264N with functional shoes. But, the rear foot landing, ankle joint force analysis produced 1680.154N with barefoot and 1657.286N with functional shoes. This study suggest that the angle of ankle depends on the landing type and bare foot running/functionalized shod running, and ankle joint forces also depends on landing type.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.5
• /
• pp.93-102
• /
• 2019

The nation's fraternity and elite players who have built up a global bicycle infrastructure often find it to be a problem with the bicycle's speed and speed reduction, pain in knees and hip joints, or even with the bike itself, or with the bike's own physical defects or a riding posture. However, we found that most cases of cleat adjustment errors were likely to be true. Accurate adjustment of the cleats is the most important of the entire fitting process and can be the basis for improving the ability of the bicycle rider and preventing injury. Therefore, the study was intended to give a prior study of bicycle fitting, which can improve bicycle efficiency and prevent injury when riding bicycle, and specific ways of adjusting bicycle shoe cleats, and the following results were obtained. First, the cleat characteristics of Shimano, LOOK and Speedplay, which are currently used in public, and the characteristics during the cleat adjustment process, were derived. In addition, the structure and characteristics of dedicated shoes using cleats and the method of using pedalling by the structure of shoes after adjusting the cleats were derived. Second, the position of the shoe and its relationship with torque in pedalling was discussed, and the method of adjusting front and back of cleats was derived. Third, leg length, ASIS, Q-Angle and Q-factor etc. were analyzed and the method of setting and adjusting cleat left and right values were derived. Fourth, the relationship between walking angle and cleat rotation was analyzed, the method was derived, and the torque size and angle behind the cleat adjustment were compared and analyzed using the spinner to indicate the torque and the effective mean torque angle after the cleat adjustment.

• Journal of Families and Better Life
• /
• v.4 no.2
• /
• pp.25-34
• /
• 1986

This study aimed to find out the suitable design of footwear cabinet. The questionnaire data from 1969 persons of 400 families about footwear cabinet showed following results. 1) The number of shoes was related with sex, age, occupation, family income, the number of family members and educational level of housewives. 2) The size of shoes in the range of 80% of the investigated shoes was 30cm of height, 30cm of length, and 10cm of width. 3) The satisfaction with footwear cabints was mainly decided by the size and space of the cabinet. 4) Umbrella, tools and shoe polish and brush were usually kept in the footwear cabinet as well as shoes. On the basic of the results above. The size of 108cm of length (20cm for umbrella), 35cm of width and 105cm of height is sugested as the desirable footwear cabinet for the General public housing scale apartment for 5 family members and this cabinet should have 5 divider and one flexible divider by 30cm which may be adjusted by 20cm.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.682-687
• /
• 2000

In this paper, the simulation methods using transmission lines are studied and realized, which are necessary in design and analysis of hydraulic control systems. The basic idea of this method is that system components are separated by transmission line element for simulation. The PI-controller can keep inductance level as low as desired. It can also handle nonlinearities and discontinuities without flag signal when restarting integration. Parallel hydraulic circuits are simulated using parallel processing algorithm. To shoe that using variable timestep size in each subsystem, simulation time can be reduced. Performance of the simulation results is compared with that of Runge Kutta method.

• The Research Journal of the Costume Culture
• /
• v.24 no.3
• /
• pp.315-323
• /
• 2016

The present study is intended to study sole types necessary for shoe designs for elementary school students that are in age groups in growth periods, and 3D midsole design utilizing 3D printing technology. This study analyzed data from the 3D measurement of the feet of 1,227 elementary school students aged 7-13 years residing in the capital region conducted as part of the 6th Anthropometry of Size Korea. In addition, 3D midsoles by sole type were designed utilizing a Rhino CAD, and midsole prototypes were output utilizing a Zortrax-M200 3D Printer. Through a cluster analysis of sole shapes by type, sole shapes were classified into three types. Type 1 has small values of foot lengths and foot breadths, with large toe 1 angles and high arch heights. Type 2 has intermediate values of foot lengths and foot breadths, with small toe 1 angles and high arch heights. Type 3 has large values of foot lengths and foot breadths with small toe 1 angles and low arch heights. On reviewing the results of design of 3D midsoles by sole type, it can be seen that the midsoles were designed according to characteristics by sole type. The results of the sole type analysis in the present study are expected to be meaningful as basic data for the development of shoe insoles for elementary school students.

• Journal of Power System Engineering
• /
• v.6 no.3
• /
• pp.36-41
• /
• 2002

A swashplate type piston motor with a tripod joints is introduced to improve compactness and starting torque in conventional types of motor. If the driving torque of motor shaft is transmitted by utilizing the mechanism, its friction torque loss would be drastically reduced and mechanical efficiency would be improved because the lateral force on the piston of the rod type motor with tripod joints mechanism is relatively smaller than that of the conventional plunger type motor. In particular, kinematics analysis for the mechanism are done as a preliminary study to investigate the feasibility of the mechanism in the axial piston motor. General formulas are derived from the displacement and velocity analysis of the mechanism, showing relationships between output shaft and shoe holder motion. A series of numerical calculations are carried out for a medium size motor with 160cc/rev using the formulas and their graphical plots are shown as well.