• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.768-775
• /
• 2010

Automotive industry is a major business area in this country and it becomes more and more important. In order to maintain high quality of vehicles, every parts should be inspected. Among them the inspection job of the knuckle bracket holes of the outer tube of shock-absorber has been done manually until now. So, it takes long time and every product can not be inspected. An automatized inspection system was proposed utilizing machine vision technology, which was composed of a slit beam laser, CCD camera, image processing computer, special jig and illuminating back lights. An algorithm which could process images of the laser and bracket holes, then gave the position, radius, roundness of the holes, was developed. This system was applied for the good and no good products and the performance was confirmed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.508-511
• /
• 2008

The most landing gear use oleo-pneumatic shock strut to absorb the impact energy during touchdown. The shock strut is composed of the oil damper and the gas spring, especially the oil damper provides resistance force which is proportional to the square of landing speed. In case of high landing speed, the abnormal peak load can be occurred and transferred to the airframe structure. To prevent this, the pressure-relief valve is used to limit the damping force under the specific level. In this paper, it is presented the design process to find optimal damping and analysis results using pressure-relief valve.

• 한국군사과학기술학회지
• /
• 제7권2호
• /
• pp.118-125
• /
• 2004

In anti-ship missile, the seeker and guidance control units are located in front of warhead. When the missile hits target, these structures play an important role to warhead structure like a shock absorber Because the shock waves are attenuated, the survival probability of warhead increases which guarantees the explosive train. In this thesis the role of frontal sections is studies. The theoretical analysis and numerical analyses using LS-DYNA code are performed. To prove the effect of shock absorber, the penetration test using subscale prototype warhead are executed.

• 한국항공운항학회지
• /
• 제20권2호
• /
• pp.7-12
• /
• 2012

A landing gear absorbs the impact energy during the touchdown and it generally consists of an oleo-pneumatic shock absorber and structural components. It should be designed not only to satisfy the static and fatigue strength requirements but to have the sufficient shock absorbing efficiency. The design loads and shock absorbing performance are to be validated by tests, which is required by MIL Spec and FAR, etc. This paper presents the development procedures from the design requirements to the qualification tests and technical points to be considered, with examples of the helicopter landing gear development.

• 대한의용생체공학회:의공학회지
• /
• 제41권5호
• /
• pp.203-209
• /
• 2020

As the number of people with gait disorders increases, the demand for using wheelchairs increases and the area of a ctivity for people with disabilities expands, thereby they increasing the demand for riding comfortability in various driving environments. Therefore, this study is to develop an entry-level active suspension system that apply to wheelchairs and to evaluate its usability. The suspension applied in this paper consists of a coil spring, a shock absorber, a control module to control the strength of the shock absorber, and a road surface condition monitoring system. A wheelchair occupant secures the riding comfort by adjusting the coil strength of the shock absorber in 12 steps according to various road conditions. Therefore, the mechanical properties were evaluated through the structural analysis of the suspension system, and the tendency toward the magnitude of the road surface vibration attenuated according to the rigidity of the suspension through the vibration test was attempted. In conclusion, as a result of structural analysis of the suspension system, stress in a range lower than the yield strength of the material was generated, and the vibration test showed the effect of attenuating the vibration generated from the road surface when the stiffness of the suspension was adjusted.

• 한국산업보건학회지
• /
• 제28권4호
• /
• pp.393-405
• /
• 2018

Objective: This study examines the types of hazardous factors in the working environment and the time-trend for their exposure levels over 10 years (2007 to 2016). Study Design and Method: The types of hazardous factors and exposure levels were drawn from the 19 measurement reports on the working environment over 10 years at a shock absorber manufacturing facility. Risk assessment of the types of factors and time-trend of exposure levels were evaluated using the factors and exposure levels. Results: A total of 34 hazardous factors were evaluated. The types were noise, 15 organic compounds, seven kinds of acid sand alkalis, eight kinds of heavy metals, and three other compounds. Special management materials used were nickel, hexavalent chrome, and sulfuric acid. Human carcinogens (1A) used were trichloroethylene, nickel, and sulfuric acid. There were six types of substances belonging to the IARC's 2B (body carcinogens) classification or higher, including, methyl isobutyl ketone, ethyl benzene, and trichloroethylene. No detection was found for 627 out of the 2065 total measurements in 19 exposure survey reports, representing 30.4%. Organic solvents, acid and alkali products, and heavy metals showed continuous low exposure concentrations. Noise, welding fumes, and the evaluation of mixed solvents show a gradual decrease in geometric mean and maximum over the time-trend of 10 years. Conclusions: In the case of a shock absorber manufacturing facility, the hazardous factors of noise and the evaluation of mixed solvents still indicate high concentrations exceeding the exposure limits and necessitate reduction studies. These two factors and welding fumes showed a continuous decrease in their ten-year tendency. Organic compounds, acids/alkalis, and heavy metals were managed smoothly in a work environment of continuous low concentrations.

• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3416-3422
• /
• 2014

쇼크 업쇼바의 로드는 피스톤부 중심에 위치하여 왕복운동을 담당하는 부분으로 표면의 불량(찍힘)이 있을 경우 감쇠력에 대한 차이로 제품 성능을 제대로 발휘하는데 문제 발생의 요인이 되고 있다. 로드표면은 열처리 상태로 표면 광택으로 인하여 쉽게 불량이 표시되지 않으며, 작업자가 육안으로 로드의 이물질 및 찍힘, 기포 검사를 진행함으로써 눈의 피로도가 높아지고, 작업자 육안에 의존하기 때문에 제품의 검사 품질이 일정하지 않다. 본 연구에서는 제품의 원통 형상을 고려하여 라인스캔카메라를 이용한 머신비전 영상처리 기법으로 0.3mm이상의 표면의 불량을 검출하고, 검사단계에서 발생할 수 있는 표면 불량을 최소화하기 위한 전 공정 자동이송 및 양불 제품의 혼입을 방지하는 자동검사 시스템 개발에 대한 연구를 수행하였다. 표면검사 시스템 개발로 작업자의 육안 검사에 의존하고 있던 쇼크업쇼버 로드의 표면에 대한 정밀 검사시스템 구축으로 품질검사 기준을 확보하고 표준화된 검사로 신뢰도가 향상되었다.

• 한국산업융합학회 논문집
• /
• 제23권5호
• /
• pp.757-763
• /
• 2020

City gas buried pipes are managed by corrosion protection to prevent corrosion. In the case of the press-in section, the double pipe and the main pipe may cause corrosion under the influence of stray current, which can shorten the life of the pipes. In addition, if the insulator is filled in the press-in section, the press-in section itself is a single structure, and can be directly affected by external impact, and when the surrounding ground subsidence occurs, the stress may be concentrated, resulting in serious consequences. In this study, a serration-type shock absorber in the form of a sliding support was proposed as a new buried double piping construction method using EPS. The serration-type shock absorber can contribute to the improvement of the integrity of the buried double piping, as it can utilize the gas piping's own ductility and stress distribution characteristics with proper anti-corrosion management and shock-absorbing material properties by preventing contact inside the buried double pipe. However, for application to ground piping, there remains a task to supplement the vulnerability against fire due to the characteristics of EPS materials.

• Journal of Biosystems Engineering
• /
• 제37권6호
• /
• pp.359-364
• /
• 2012

Purpose: This study was conducted to analyze the vibration absorption effect for the agricultural product transportation-trailer equipped with vibration absorbable connecting hitch, leaf spring suspension, and shock absorber simultaneously (HLS), comparing with the trailer equipped with vibration absorbable connecting hitch only(H), trailer equipped with connecting hitch and leaf spring suspension (HL), and existing trailer with no vibration absorption device (E). Methods: Vertical accelerations were measured at driver seat and front, middle, rear parts of trailer bottom with no load for 4 types of transportation-trailer, and analyzed using FFT analyzer. Results: The magnitude of average vibration accelerations occurred up to 20 Hz, at this low frequencies the severe damage for agricultural products could be represented, was lower (maximum 6 times) for HLS trailer compared with H trailer. And vibration absorption effect for HLS trailer was also higher up to 40-80 Hz and 80-100 Hz, but the difference was less. At driver seat, the vibration absorption effect was high severely for HL and HLS trailer, and the magnitude of vibration acceleration was showed less difference in comparing at trailer bottom. Conclusions: From the test results, it could be recommended that the agricultural products transportation trailer should be equipped with vibration absorption device of HLS.

• 산업경영시스템학회지
• /
• 제32권4호
• /
• pp.87-92
• /
• 2009

쇽옵서버 피스톤로드(shock absorber piston rod)는 자동차의 충격과 진동의 흡수에 작용하는 자동차 현가장치(suspension equipment)부품의 일종이다. 피스톤로드는 자동차 충격흡수에 매우 밀접한 영향을 주기 때문에 제조에 있어서 고도의 정밀도와 표면 매끄러움이 요구된다. 피스톤로드의 제조공정은 선삭, 홈가공, 밀링, 전조 등 여러 공정으로 구성되는데, 여기서 품질불량에 가장 크게 영향을 주는 공정은 선삭공정(lathing process)이다. 이는 선삭공정의 가공공구(insert component)가 주원인으로서 반복되는 가공으로 인한 공구의 마모(abrasion)나 파손(breakage)이 주요 원인으로 지적되고 있다. 따라서 가공 데이터를 수집 분석하여 공구의 교체시기를 파악한다거나 가공 부품의 측정 데이터가 관리도 상하한선 내에 있는지 등 가공 공정 전반에 대한 체계적인 공정관리 시스템 개발이 요구된다. 본 연구에서는 자동차 쇽업서버 피스톤로드 제조공정의 가공 정보를 체계적으로 수집하여 관리하고 분석하는 자동차 쇽업서버 피스톤로드 제조공정에 대한 공정관리시스템을 개발하는 것이 목적이다. 개발결과 피스톤 로드의 측정 치수 변화 및 불량발생을 측정, 감지할 수 있었으며, 본 시스템을 통해 가공공구의 치수오차를 보정(compensation)하고 공정의 불량발생을 조기에 방지 함으로써 불량률은 1/5로 경감하고 작업자 수도 1/2로 감소시킬 수 있었다.