• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.123-128
• /
• 2006

This paper presents the design of a surveillance night vision system for marine ships. Both a hardware system and software modules for tracking control are developed. In order to control each control axis with compensation for ship motion, the two-degree of freedom(TDF) PID controller is designed and its parameters are tuned using a real-coded genetic algorithm(RCGA). Simulation demonstrates the effectiveness of the proposed system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.343-348
• /
• 2006

Number of researches on efficient terminal operation system applying RFID(Radio Frequency Identification) are on progress. However, RFID has limitations on tracking and providing accurate positions of containers. In this paper, to enhance the performance of the integrated terminal operation system, an efficient loading management of yard is proposed by applying RFID-based RTLS(Real Time Locating System) that provides real-time accurate positions of containers. We found that a group-based sequence system is more efficient than the existing individual sequence number system in the container yard. In the group-based sequence system, the containers in the same group should have similar characteristics such as port of destination(POD), size, weight, etc. In order to run this system, we have proposed the parameters to the unspecified N bytes of RFID tag which are specified in ISO 18000-7. And, this paper proposed a development of integrated operation system of container terminal using RFID for reducing the ship turnaround time in ubiquitous port environment.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.4
• /
• pp.33-47
• /
• 1994

On developing port system, the performance tests of system in relation to ship maneuver generally consists of the three parts: the channel transit, the manoeuvring in a turning basin and the docking/undocking. The quantifications of risk of an accident has priviously been difficult due to the low occurrence of accidents relative to the number of transits. Additionally, accident statistics could not be related port system because of the large number of factors contributing to the accident. such as human error, equipment failure, visibility, light, traffic. etc. In case of the channel transit, "Relative Risk Factor(RRF)" or "Relative Risk Factor for Meeting Traffic" was proposed as the as the measures derived to quantify the relative risk of accident by M.W.Smith. This factor measure the tracking performance, the turning performance and the passing performance at meeting traffic. On the other hand, the safety of berthing maneuver is not measured with a few evaluating factors as controlled due to complex controllabilites such as steering, engine, side thrusters or tugs. This work, therefore, aims to propose the evaluating measure by the Analytic Hierarchy Process(AHP). Six experimental scenarios were establised under the various environmental conditions as independent variables. In every simulation, the difficulty of maneuver was scored by captain and compared with AHP scores. The results show almost same and from which the weights of eight evaluating factors could be fixed. Additionally, the limit value of relative factor in berthing safety to six scenarios could be estimated to 0.11.e estimated to 0.11.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.334-341
• /
• 2020

The optimum solutions of the instability of the target velocity were studied to solve the case of the target velocity of the ship approaching at a speed of ◯◯knots and deviated by more than ± 10knots, while the surveillance radar rotating speed was varied, while the maximum search range of the radar was evaluated during the operational test & evaluation. The instability of the target velocity did not enable the radar to calculate the information of the target precisely and to degrade the probability of hit and the quality of the target management. The improvement to handle the deviation of the target velocity was optimally determined by using a fishbone diagram to find 9 reasons based on 4M1E, and the algorithm of the target management was identified as the crucial reason. In this study, the improvement was applied to the filter algorithm to stabilize the target velocity in the target tracking management SW by reviewing the current algorithm to find the velocity of the target and recognizing that the problem does not apply to different 𝜶, 𝞫 values when the antenna changed the rotating speed. The ability of the improvement to work was tested on board.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.263-268
• /
• 2000

In this paper, a new indirect feedback active noise control (ANC) scheme based on the fundamental frequency estimation is proposed for systems with a harmonic noise. When reference signals necessary for feedforward ANC configuration is difficult to obtain, the conventional ANC algorithms for multi-tonal noise do not measure the reference signals but generate them with the estimated frequencies. However, the beating phenomena, in which certain frequency components of the noise vanish intermittently, may make the adaptive frequency estimation difficult. The confusion in the estimated frequencies due to the beating phenomena makes the generated reference signals worthless. The proposed algorithm consists of two parts. The first part is a reference generator using the fundamental frequency estimation and the second one is the conventional feedforward control. We propose the fundamental frequency estimation algorithm using decision rules, which is insensitive to the beating phenomena. In addition, the proposed fundamental frequency estimation algorithm has good tracking capability and lower variance of frequency estimation error than that of the conventional cascade ANF method. We are also able to control all interested modes of the noise, even which cannot be estimated by the conventional frequency estimation method because of the poor SIN ratio. We verify the performance of the proposed ANC method through simulations for the measured cabin noise of a passenger ship and the measured time-varying engine booming noise of a passenger vehicle.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1059-1066
• /
• 2000

In this paper. a new indirect feedback active noise control (ANC) scheme barred on the fundamental frequency estimation is proposed for systems with a harmonic noise. When reference signals necessary for feedforward ANC configuration are difficult to obtain, the conventional ANC algorithms for multi-tonal noise do not measure the reference signals but generate them with the estimated frequencies.$^{(4)}$ However, the beating phenomena, in which certain frequency components of the noise vanish intermittently, may make the adaptive frequency estimation difficult. The confusion in the estimated frequencies due to the beating phenomena makes the generated reference signals worthless. The proposed algorithm consists of two parts. The first part is a reference generator using the fundamental frequency estimation and the second one is the conventional feedforward control. We propose the fundamental frequency estimation algorithm using decision rules. which is insensitive to the beating phenomena. In addition, the proposed fundamental frequency estimation algorithm has good tracking capability and lower variance of frequency estimation error than that of the conventional cascade ANF method.$^{(4)}$ We are also able to control all interested modes of the noise, even which cannot be estimated by the conventional frequency estimation method because of the poor S/N ratio. We verify the performance of the proposed ANC method through simulations for the measured cabin noise of a passenger ship and the measured time-varying engine booming noise of a passenger vehicle.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.9
• /
• pp.776-787
• /
• 2002

Automation of welding process in shipyards is ultimately necessary, since the welding site is spatially enclosed by floors and girders, and therefore welding operators are exposed to hostile working conditions. To solve this problem, a welding mobile robot that can navigate autonomously within the enclosure has been developed. To achieve the welding task in the closed space, the robotic welding system needs a sensor system for the working environment recognition and the weld seam tracking, and a specially designed environment recognition strategy. In this paper, a three-dimensional laser vision system is developed based on the optical triangulation technology in order to provide robots with 3D work environmental map. Using this sensor system, a spatial filter based on neural network technology is designed for extracting the center of laser stripe, and evaluated in various situations. An environment modeling algorithm structure is proposed and tested, which is composed of the laser scanning module for 3D voxel modeling and the plane reconstruction module for mobile robot localization. Finally, an environmental recognition strategy for welding mobile robot is developed in order to recognize the work environments efficiently. The design of the sensor system, the algorithm for sensing the partially structured environment with plane segments, and the recognition strategy and tactics for sensing the work environment are described and discussed with a series of experiments in detail.

• Ocean and Polar Research
• /
• v.42 no.3
• /
• pp.211-223
• /
• 2020

With the increasing demand for improved marine environments and safety, greater ability to minimize damages to coastal areas from harmful organisms, ship accidents, oil spills, etc. is required. In this regard, an accurate assessment and understanding of current systems is a crucial step to improve forecasting ability. In this study, we examine spatial and temporal characteristics of current systems in the adjacent seas of Jeju Island using a high-resolution regional ocean circulation model. Our model successfully captures the features of tides and tidal currents observed around Jeju Island. The tide form number calculated from the model result ranges between 0.3 and 0.45 in the adjacent seas of Jeju Island, indicating that the dominant type of tides is a combination of diurnal and semidiurnal, but predominantly semidiurnal. The spatial pattern of tidal current ellipses show that the tidal currents oscillate in a northwest-southeast direction and the rotating direction is clockwise in the adjacent seas of Jeju Island and counterclockwise in the Jeju Strait. Compared to the mean kinetic energy, the contribution of tidal current energy prevails the most parts of the region, but largely decreases in the eastern seas of Jeju Island where the Tsushima Warm Current is dominant. In addition, a Lagrangian particle-tracking experiment conducted suggests that particle trajectories in tidal currents flowing along the coast may differ substantially from the mean current direction. Thus, improving our understanding of tidal currents is essential to forecast the transport of marine pollution and harmful organisms in the adjacent seas of Jeju Island.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.5
• /
• pp.295-301
• /
• 2017

Recently, autonomous navigation technology, obstacle recognition, and obstacle collision avoidance technology are actively being developed for an unmanned surface vehicle (USV). The path to move from the current location to the destination should be planned, in order for an USV to autonomously operate safely to its destination. The dynamic window approach (DWA) is a well-known navigation scheme as a local path planning. The DWA algorithm derives the linear velocity and angular velocity by evaluating the destination direction, velocity, and distance from the obstacle. However, because DWA algorithm does not consider tracking the path, when using only the DWA algorithm, the ship may navigate away from the path line after avoiding obstacles. In this paper, we propose an improved DWA algorithm that can follow path line. And we implemented the simulation and compared the existing DWA algorithm with the improved DWA algorithm proposed in this paper. As a result, it is confirmed that the proposed DWA algorithm follows the path line better.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.2
• /
• pp.27-34
• /
• 2014

Buzz margin scheduling and control technique which are suitable to regulate stable and high pressure air in wide range of Mach number are suggested for fixed geometry of a supersonic intake. From the analysis of preceding study, most effective control variable is induced and scheduling law is newly suggested in a real application point of view. The appropriateness of the control law in wide range of Mach number is addressed by numerical simulation of controlled propulsion system. Also, the simulation for stabilization and tracking performances of the controller are studied to investigate the phenomena under flight maneuver and disturbances.