• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1628-1631
• /
• 2005

Ship Autopilots are usually designed based on the PD and Pill controllers because of simplicity, reliability and easy to construct. However their performance in various environmental conditions is not as good as desired. This disadvantage can be overcome by adjusting works or constructing adaptive controllers. But those methods are complex and not easy to do. This paper presents a new method for constructing a Ship Autopilot based on the combination of Fuzzy Logic Control (FLC) and Linear Control Theory (Pill control). The new Ship Autopilot has the advantages of both the Pill and FLC control methodologies: easy to construct, and optimal control laws can be established based on ship masters' knowledge. Therefore, the new ship autopilot can be well adapted with parameter variations and strong environment effects. Simulation using MATLAB software for a ship with real parameters shows high effectiveness of the Fuzzy Pill autopilot in course keeping and course changing manoeuvres in comparison with the ordinary Pill ship autopilots.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.776-781
• /
• 2010

In the ship-handling simulator, it is important for a ship manoeuvring model to represent the dynamic characteristic of a ship and to be simple for reducing calculation time. Especially, even if principal dimensions of a ship are given in initial design stage, or manoeuvring test data are only given by model or real ship's trials, simulations are often needed to check the manoeuvrability of a ship. In this paper, a simple manoeuvring model based on turning test data of a ship is mathematically developed. And the simulation results are verified by comparing with turning test results of a real ship.

• 해양환경안전학회지
• /
• 제23권1호
• /
• pp.40-46
• /
• 2017

본 연구는 LS-DYNA 971 을 이용하여 내빙 구조 선박과 빙산 모형 간의 충돌 시험을 수행 후 북극해 운항 선박의 내빙 능력을 분석하였다. 국제선급연합회(IACS)의 Unified Requirements for Polar ship(URI) 규정을 바탕으로 FEM 선박 모형에 내빙 구조를 적용하였으며, 빙산 모형에는 Elastic-perfect plastic 물성과 Tsai-Wu 항복 곡면을 적용하였다. 또한 실험 결과 비교를 위하여 내빙 구조를 갖추지 않은 일반선박 모형과의 충돌 시험도 수행하였다. 실험 결과 일반 구조 선박의 구형 선수에 빙산 모형에 의해 움푹 들어간 약 1.8 미터 깊이의 선체 손상이 발생하였으나, 내빙 구조 선박의 충돌에서는 약 1.0 미터 깊이의 선체 손상만이 발생하였다. 또한 일반 구조 선박과 충돌한 빙산모형은 원형의 상태를 거의 유지한 반면, 내빙 구조 선박과 충돌한 빙산 모형은 내빙 구조의 구형 선수에 의해 빙산이 일부 파괴되는 현상이 발견되었다.

• 한국안전학회지
• /
• 제23권1호
• /
• pp.46-50
• /
• 2008

The purpose of the present study was to investigate the mariner's information characteristics in ship-ta-ship collision situation using the full mission ship-handling simulator. Risk levels of ship-to-ship collision were manipulated by whether the target ship complies with the naval regulations and by movement patterns of target ship. Dependent variables reflecting mariner's information characteristics in ship-ta-ship collision situation were measured in terms of radar detection reaction time, free recall performance of past navigation situation, and subjective ratings for the task difficulty. The results showed that, in general, the mariners appeared to be deteriorated in their radar detection reaction time and free recall performance as the risk of ship-ta-ship collision increased. Also, the mariners tended to rate required tasks more difficult in the high risk ship-ta-ship collision situation.

• 한국통신학회논문지
• /
• 제38C권3호
• /
• pp.288-295
• /
• 2013

본 논문에서는 4S (Ship to Ship, Ship to Shore) 해상통신을 위해 다른 채널 조건 하에서 기존의 채널 추정 기법을 비교하였다. 일반적으로 수신 신호는 다중경로나 부호 간 간섭에 의해 손상을 받게 된다. 시간 변화 다중 페이딩 채널의 추정은 수신기에서 어려운 작업이며, 적절한 채널 추정 필터를 사용함으로써 수신기의 성능을 향상시킬 수 있다. 모의실험은 MATLAB을 사용하여 AWGN (Additive White Gaussian Noise), Rician, Rayleigh 채널에서 채널 추정 알고리즘으로 주로 사용되어지는 LMS (Least Mean Square)와 RLS (Recursive Least-Squares) 알고리즘을 비교 하였다.

• 해양환경안전학회지
• /
• 제14권2호
• /
• pp.157-162
• /
• 2008

선박의 충돌회피조선에 있어서 조종성능은 중요한 요소이다. 일반적으로 사용되는 조종성능은 심수역을 대상으로 작성되며, 천수역을 항주하는 선박의 조종성은 일반적으로 선회성은 저하되고 침로안정성 또는 추종성은 향상된다. 이러한 선회성의 변화는 충돌회피에 있어 위험을 초래할 수 있다. 본 연구에서는 천수역의 조종성능을 반영함과 동시에 충돌위험정도를 쉽게 파악할 수 있도록 하기 위한 가변안전경계영역의 새로운 적용기법을 제시하였다. 수학적 수치시뮬레이션 검증을 통하여 새롭게 제안된 기법의 유용성을 확인하였다. 따라서 선박충돌위험에 대한 충분한 충돌회피 조선을 지원할 수 있을 것으로 기대된다.

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.171-176
• /
• 2006

To improve ship's maneuverability high lift rudders like as Schilling rudder, flap rudder etc. were used. To predict the maneuverability of a ship with flap rudder HPMM tests are carried out. To analyze the test results modular model is used. To use modular model the forces of flap rudder must be measured separately from the hull forces. The flap rudder is made as independent system from the hull. To investigate the simulation results of modular model the tests results are analyzed by whole ship model, and simulated. The compared results of simulation show a good agreement except turning test. The reason is the different analysis result of flap rudder drag forces. From the present study it is possible to analyze HPMM tests of a ship with flap rudder by modular model.

• 로봇학회논문지
• /
• 제17권1호
• /
• pp.48-57
• /
• 2022

In this paper, we propose a legged landing platform for the quadcopter taking off and landing in the ship environment. In the ship environment with waves and winds, the aircraft has risks being overturned by contact impact and excessive inclination during landing on the ship. This landing platform has four landing legs under the quadcopter for balancing and shock relief. In order to make the quadcopter balanced on ships, the position of each end effector was controlled by PID control. And shocks have mainly happened when quadcopter contacts the ship's surface as well as legs move fast. Hence, impedance control was used to cope with the shocks. The performance of the landing platform was demonstrated by a simulation and a prototype in three sea states based on a specific size of a ship. During landing and tracking the slope of the ship's surface, oscillations of rotation and translation from the shock were mitigated by the controller. As a result, it was verified that transient response and stability got better by adding impedance control in simulation models and prototype experiments.

• Ocean Systems Engineering
• /
• 제12권3호
• /
• pp.267-284
• /
• 2022

A subsea pipeline designed across active shipping lane prones to failure against external interferences such as anchorage activities, hence risk assessment is essential. It requires quantifying the geometric probability derived from ship traffic distribution based on Automatic Identification System (AIS) data. The actual probability density function from historical vessel traffic data is ideal, as for rapid assessment, conceptual study, when the AIS data is scarce or when the local vessels traffic are not utilised with AIS. Recommended practices suggest the probability distribution is assumed as a single peak Gaussian. This study compares several fitted Gaussian distributions and Monte Carlo simulation based on actual ship traffic data in main ship direction in an active shipping lane across a subsea pipeline. The results shows that a Gaussian distribution with five peaks is required to represent the ship traffic data, providing an error of 0.23%, while a single peak Gaussian distribution and the Monte Carlo simulation with one hundred million realisation provide an error of 1.32% and 0.79% respectively. Thus, it can be concluded that the multi-peak Gaussian distribution can represent the actual ship traffic distribution in the main direction, but it is less representative for ship traffic distribution in other direction. The geometric probability is utilised in a quantitative risk assessment (QRA) for subsea pipeline against vessel anchor dropping and dragging and vessel sinking.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.164-169
• /
• 2001

A comprehensive extension of functions and efficiency of the software system, DS/Block, developed earlier for the purpose of simulation of the motion of a ship block during lifting and turnover operation. A viewpoint change used in 3D-CAD is utilized and saves the time for displays of a series of configurations for the motion. The Euler parameters are adopted to convert 3 rotational degrees of freedom about global coordinate system to those about local coordinate system defined in Pro/ENGINEER. DS/Block provides FEM input data for stress and strain analyses. Several functions are incorporated for user-friendliness. DS/Block is to be tested and installed in a shipyard.