• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.1
• /
• pp.124-131
• /
• 2005

This paper suggests LOS(Line-Of-Sight) guidance system of a surface vessel in straight-line navigation under ocean currents An LOS vector from the vessel to a point on the path between two way-points is decided and a heading angle is calculated to converge to follow the desired path based on the LOS vector This guidance system is called LOS guidance system. The suggested LOS guidance law has parameters to be properly chosen according to navigational environment. Parameters of LOS guidance system are optimized to reduce propulsive energy and/or position error between desired Position and present position of a ship using genetic algorithm which is a strong optimization algorithm with adaptational random search The effectiveness of the suggested LOS guidance system is assured through computer simulations.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.190-196
• /
• 2001

The naval vessel must moves rolling, pitching, yawing by wave when it runs in ocean. Some narrow beam antenna needed position compensation by stabilizer or gimbal for best performance. This paper presents the precision position control for heavy weight(130kg) in roll and pitch direction. Generally it's called for gimbal. This gimbal uses P-I controller, and it's driven by linear actuator and servo motor. This gimbal gets ship's gyro signal and synchro, which have the absolute angle value. Some other similar equipments are driven by huge hydraulic power, but this gimbal is driven by small servo motor. This control loop gets the following procedure repeatedly; reading ship gyro and gimbal synchro, calculating compensated error and control output, driving motor and actuator The performance of gimbal system was satisfied.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.681-687
• /
• 2023

The selection technique for optimal operation position selection technique is used to present the initial bow and stern draft with minimum resistance, for achievingthat is, the optimal fuel consumption efficiency at a given operating displacement and speed. The main purpose of this studypaper is to develop a program to select the optimal operating position with maximum energy efficiency under given operating conditions based on the effective power data of the target ship. This program was written as a Python-based GUI (Graphic User Interface) usingbased on artificial intelligence techniques sucho that ship owners could easily use the GUIit. In the process, tThe introduction of the target ship, the collection of effective power data through computational fluid dynamics (CFD), the learning method of the effective power model using deep learning, and the program for presenting the optimal operation position using the deep neural network (DNN) model were specifically explained. Ships are loaded and unloaded for each operation, which changes the cargo load and changes the displacement. The shipowners wants to know the optimal operating position with minimum resistance, that is, maximum energy efficiency, according to the given speed of each displacement. The developed GUI can be installed on the ship's tablet PC and application and used to determineselect the optimal operating position.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.232-236
• /
• 2003

The anchor is laid on seabed and the main engine is worked to against incident environmental loads in typoon. As the main engine is broken down in the storm, the anchor chain is cutted and the vessel is drifted. Although a ship is moored by two point mooring lines to keep the her position, a ship is crashed into a rock because of typoon and the accident of oil spilling may be occured. In this paper, we studied the position-keeping of a ship which is analyized based on the slow motion maneuvering equations considering wave, current and wind. The direct integration method is employed to estimate wave loads. The current forces are calculated by using mathematical of MMG. The two point mooring forces are quasisatatically evaluated by using the catenary equation. The coefficeints of wind forces are modeled from Isherwood’s emperical data and the variation of wind speed is estimated by wind spectrum. The nonlinear motions of a two point moored ship are simulated considering wave, current, wind load in time domain.

• Journal of Ship and Ocean Technology
• /
• v.11 no.1
• /
• pp.36-46
• /
• 2007

The maintenance of a ship is essential for safe navigation and hence regular surveys are prescribed according to the rule of classification societies. A hull inspection is generally performed by professional divers, but it takes a long time and the efficiency is low in terms of time and cost. In this research, a ROV(Remotely Operated Vehicle) named as SNU-ROV(Seoul National University-ROV) is developed to replace the conventional inspection method. In this system, the ROV is intended to be used for inspecting ship and harbor because harbor inspection is merging as a safety measure against any possible terror actions. In order to increase the efficiency of inspection, the ROV must be able to measure the exact position of damages. SNU-ROV has a positioning system based on LBL(Long Base Line). In shallow water such as harbor, however, LBL has bad DOP(Dilution of Precision) in the depth direction due to the limited depth. Thus LBL only can not locate the exact depth position. To solve the DOP problem, a pressure sensor is introduced to LBL and a complementary filter is attached by using indirect feedback Kalman filter. Thus developed positioning system is verified by simulation and experiment in towing tank.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.312-315
• /
• 2003

The paper presents a small. unmanned remote controlled probing ship that can reduce the cost for acquiring data of marine and coastal environments. The control system is composed of three microprocessors. one is for overall mission control. another for control of propulsion motors. and the other for sensor operation. For communication system, we adopt direct and indirect methods based on the wireless modem of commercial cellular telephone. The former is a direct communication between the modems of the ship and the server. and the latter is an indirect communication via internet between the ship and the server. The system is equipped with a digital compass and a GPS system for position estimation, and extended Kalman filter is used for the data association. The performance of the ship is demonstrated with the results produced by sets of experiments.

• The Journal of Economics, Marketing and Management
• /
• v.5 no.3
• /
• pp.30-38
• /
• 2017

The main target to do this analysis is to find out the competitiveness between 2 countries(Korea and USA) in the ship business industry. Ever since free from Japanese empire domination of modern history in Korean peninsular, Korea has been strong relationship with USA almost every fields. The purpose of this research is to realize which country is more competitive between 2 country's trade structure. This research conducted for period from 2000 to 2016. Expecting effect is to learn how to improve ship industry for 2 countries. Research method is used by comparative advantage trade theory. Even though Koran government has been accomplishing trade stimulus environment against USA ship industry, it is research limitation that overseas productions both Korean & USA are not available due to company business strategy. From early 50's, every USA industries hold a dominant position so far. Now, Korea is comparative advantage against that of USA in the field of ship industry. Sound competition relationship is good for both 2 countries for mutual benefits. The future prospect is Korea needs export market diversification to enlarge economic growth in the long run.

• Journal of Ship and Ocean Technology
• /
• v.5 no.3
• /
• pp.36-44
• /
• 2001

The collision energy absorbing characteristics of side structure of the LNG carriers which have the cargo containment systems of the spherical and the membrane types are compared. A failure mechanism of the double hull side structures of 130, 000 $m^3$ class LNG carriers under sideways collision event has been simulated by using the detailed finite element calculations. In ship collision analysis, the finite element method based on explicit time integration has been use[1 with much success. Finite element modeling techniques for detail description of structural members antral ship motion regarding the dynamic behavior allowed to investigate the effect of bow shape and the initial contact position on side shell of collided ship. In the numerical simulations of the ship-to-ship sideways collision, the effect of the colliding bow shapes and the change of the colliding ship draft are investigated. The critical collision energy which is absorbed by a side structure of a collided ship until the fore-end of colliding ship arrives at the boundary of the cargo tank is calculated. The critical speed of specified colliding ships which can not penetrate the boundary of the LNG cargo tank of the collided ship under collision accident if evaluated.

• Journal of the Korean Institute of Navigation
• /
• v.12 no.1
• /
• pp.27-43
• /
• 1988

The tedious work, connected to the altitude correction, the computation of altitudes and aximuths and the plotting of the position lines, has been a objection to celestial position fixing method. But using a computer , the severe objection will be practically overruled. The author had already studied on computerization of the sight reduction partially. This paper is to confirm reliability of coordinate of the moon and the navigational planet calculated by computer programming and to suggest a method of calculating ship's position fixed by two position lines.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.6
• /
• pp.40-46
• /
• 2010

It is an important element increasing ship production to manage an accurate position of transporters(TP) and ship blocks in a shipyard. However, most works are presently being performed by judgment of a system manager and skilled workers. This paper introduced about the system for tracking an accurate position of the transporters and the blocks which are main mobile objects in the shipyard, and proposed a method to decide whether or not a loading/unloading state of the blocks, which is one of the most important functions of the tracking system. Three sensors were used in order to implement the method. One is a RFID reader to identify a target block, another is a RFID reader to estimate a position of the TP as it recognizes a underground tag. The other is a ultrasonic sensor to detect an object. Two experiments were carried out in the shipyard. After correcting errors found on the first experiment. we confirmed that the result could be applied to the shipbuilding yard from the final experiment.